August 15, 2013 NHTSA CAMPAIGN NUMBER: 13V360000
Possible Loss of Braking Assist
A loss of braking assistance will require extra pedal force and/or distance to bring the vehicle to a stop, increasing the risk of a crash.
NHTSA Campaign Number: 13V360
Manufacturer General Motors
LLC
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 292,879
Summary
General Motors
(GM) is recalling certain model year 2011-2012 Chevrolet
Cruze vehicles equipped with 1.4L DOHC gasoline turbo
engines
and 6T40 front wheel drive automatic transmissions
and equipped with an electric vacuum pump to provide supplemental vacuum for brake assist, when needed. In the affected vehicles, the pump may not activate, resulting in an intermittent reduction or loss of brake assist.
Remedy
General Motors
will notify owners, and dealers will replace a microswitch in the power brake vacuum pipe assembly, free of charge. The recall began on October 7, 2013. Owners may contact Chevrolet
at 1-800-222-1020. GM’s recall number is 12213.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
Parts
| Description | Quantity /Vehicle | Part Number |
| Pipe Asm P/B Boost Vac | 1 | 13457666
GM Genuine Parts 178-0921 (13457666) Power Brake Booster Vacuum Pipe Assembly
|
SEOCONTENT-START
#12213A: Product Safety – Brake Vacuum Micro Switch – (Jun 17, 2015)
| Subject: | Brake Vacuum Micro Switch |
| Models: | 2011-2012 Chevrolet |
| Equipped with 1.4L DOHC Turbo |
The parts information, service procedure and warranty transaction Information sections have been revised. The repair has been revised to replace the power brake booster vacuum pipe, which includes the vacuum micro switch. Vehicles previously repaired under this recall do not need any additional repairs. Please discard all copies of bulletin 12213.
Condition
General Motors
has decided that a defect, which relates to motor vehicle safety, exists in certain 2011–2012 model year Chevrolet
Cruze vehicles equipped with a 1.4L DOHC gasoline turbo
engine
(LUJ) and a 6T40 FWD automatic transmission
(MH8). This engine
-transmission
combination requires supplemental vacuum under certain operating conditions.
An electric vacuum pump provides the supplemental vacuum, and if this is not available due to silicon on the brake vacuum micro switch, brake assist may be intermittently reduced or lost.
Reduction or loss of brake assist will require extra pedal force and/or longer distance to bring the vehicle to a stop, increasing the risk of a crash.
Correction
Dealers are to replace the power brake booster vacuum pipe.
Vehicles Involved
All involved vehicles are identified by Vehicle Identification Number on the Investigate Vehicle History screen in GM Global Warranty Management system.
Dealership service personnel should always check this site to confirm vehicle involvement prior to beginning any required inspections and/or repairs.
It is important to routinely use this tool to verify eligibility because not all similar vehicles may be involved regardless of description or option content.
For dealers with involved vehicles, a listing with involved vehicles containing the complete vehicle identification number, customer name, and address information has been prepared and will be provided to US and Canadian dealers through the GM GlobalConnect Recall Reports, or sent directly to export dealers.
Dealers will not have a report available if they have no involved vehicles currently assigned.
The listing may contain customer names and addresses obtained from Motor Vehicle Registration Records.
The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete this recall is a violation of law in several states/provinces/countries.
Accordingly, you are urged to limit the use of this report to the follow-up necessary to complete this recall.
Parts Information
Parts required to complete this recall are to be obtained from General Motors
Customer Care and Aftersales (GMCC&A).
Please refer to your “involved vehicles listing” before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order.
In an emergency situation, parts should be ordered on a CSO = Customer Special Order.
| Part Number | Description | Quantity/ Vehicle |
| 13457666
GM Genuine Parts 178-0921 (13457666) Power Brake Booster Vacuum Pipe Assembly
|
Pipe Asm P/B Boost Vac | 1 |
Service Procedure
Note: Vehicles repaired using the brake vacuum micro switch replacement procedure provided in the original field action bulletin 12213 DO NOT require the power brake booster vacuum pipe replacement procedure in this bulletin be performed. The brake vacuum micro switch is part of the power brake booster vacuum pipe assembly. Only perform this procedure on vehicles that have not been previously repaired.

- Remove the power brake booster vacuum pipe (1). Refer to Power Brake Booster Vacuum Pipe Replacement in SI.
- Discard the power brake booster vacuum pipe.
- Install a new power brake booster vacuum pipe (1). Refer to Power Brake Booster Vacuum Pipe Replacement in SI.
Customer Reimbursement – For US
Customer requests for reimbursement of previously paid repairs for the recall condition are to be submitted to the dealer by December 31, 2015, unless otherwise specified by state law.
If this is not convenient for the customer, they may mail the completed Customer Reimbursement Request Form and all required documents to the GM Customer Assistance Center.
All reasonable and customary costs to correct the condition described in this bulletin should be considered for reimbursement.
Any questions or concerns should be reviewed with your GM representative prior to processing the request.
When a customer requests reimbursement, they must provide the following:
- A completed Customer Reimbursement Request Form. This form is mailed to the customer or can be obtained through GM GlobalConnect.
- The name and address of the person who paid for the repair.
- Paid receipt confirming the amount of the repair expense, a description of the repair, and the person or entity performing the repair.
Important: GM requires dealers to approve or deny a reimbursement request within 30 days of receipt. If a reimbursement request is approved, the dealer should immediately issue a check to the customer and submit an appropriate warranty transaction for the incurred expense. If a reimbursement request is denied, the dealer MUSTprovide the customer with a clear and concise explanation, in writing, as to why the request was denied. The bottom portion of the Customer Reimbursement Request Form may be used for this purpose. If the denial was due to missing documents, the customer can resubmit the request when the missing documents are obtained, as long as it is still within the allowed reimbursement period.
Warranty transactions for customer reimbursement of previously paid repairs are to be submitted as required by GM Global Warranty Management.
Additional information can also be found in Warranty Administration Bulletin 11-00-89-004.
Customer Reimbursement – For Canada and Export
Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to be submitted to the dealer prior to or by December 31, 2015.
When a customer requests reimbursement, they must provide the following:
- Proof of ownership at time of repair.
- Original paid receipt confirming the amount of unreimbursed repair expense(s) (including Service Contract deductibles), a description of the repair, and the person or entity performing the repair.
All reasonable and customary costs to correct the condition described in this bulletin should be considered for reimbursement.
Any questions or concerns should be reviewed with your GM representative prior to processing the request.
Courtesy Transportation – For US and Canada
The General Motors
Courtesy Transportation program is intended to minimize customer inconvenience when a vehicle requires a repair that is covered by the New Vehicle Limited Warranties.
The availability of courtesy transportation to customers whose vehicles are within the warranty coverage period and involved in a product program is very important in maintaining customer satisfaction.
Dealers are to ensure that these customers understand that shuttle service or some other form of courtesy transportation is available and will be provided at no charge.
Dealers should refer to the General Motors
Service Policies and Procedures Manual for Courtesy Transportation guidelines.
Warranty Transaction Information
Submit a transaction using the table below. All transactions should be submitted as a ZFAT transaction type, unless noted otherwise.
| Labor Code | Description | Labor Time | Net Item |
| 9101530 | Power Brake Booster Vacuum Pipe Replacement | 0.2 | N/A |
| 9100156 | Customer Reimbursement Approved | 0.2 | * |
| 9100157 | Customer Reimbursement Denied – For US dealers only | 0.1 | N/A |
Customer reimbursement will close this recall. The service procedure is not required.
* The amount identified in “Net Item” should represent the dollar amount reimbursed to the customer.
Customer Notification – For US and Canada
General Motors
will notify customers of this recall on their vehicle (see copy of customer letter included with this bulletin).
Customer Notification – For Export
Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor Vehicle Safety Act.
For owners outside these areas, dealers should notify customers using the attached sample letter.
Dealer Recall Responsibility – For US and Export (US States, Territories, and Possessions)
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
The US National Traffic and Motor Vehicle Safety Act provides that each vehicle that is subject to a recall of this type must be adequately repaired within a reasonable time after the customer has tendered it for repair.
A failure to repair within sixty days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time.
If the condition is not adequately repaired within a reasonable time, the customer may be entitled to an identical or reasonably equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation.
To avoid having to provide these burdensome remedies, every effort must be made to promptly schedule an appointment with each customer and to repair their vehicle as soon as possible.
In the recall notification letters, customers are told how to contact the US National Highway Traffic Safety Administration if the recall is not completed within a reasonable time.
Dealer Recall Responsibility – All
All unsold new vehicles in dealers’ possession and subject to this recall must be held and inspected/repaired per the service procedure of this recall bulletin beforecustomers take possession of these vehicles.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the dealer listing, are to be contacted by the dealer.
Arrangements are to be made to make the required correction according to the instructions contained in this bulletin.
A copy of the customer letter is provided in this bulletin for your use in contacting customers.
Recall follow-up cards should not be used for this purpose, since the customer may not as yet have received the notification letter.
October 2013
Dear General Motors
Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
General Motors
has decided that a defect, which relates to motor vehicle safety, exists in certain 2011–2012 model year Chevrolet
Cruze vehicles equipped with a 1.4L turbo
engine
and a 6-speed automatic transmission
. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
Important:
IMPORTANT |
| Why is your vehicle being recalled? | This engine |
| What will we do? | Your GM dealer will replace the brake vacuum micro switch. This service will be performed for you at no charge . Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual service correction time of approximately 25 to 45 minutes.
If your vehicle is within the New Vehicle Limited Warranty, your dealer may provide you with shuttle service or some other form of courtesy transportation while your vehicle is at the dealership for this repair. Please refer to your Owner Manual and your dealer for details on courtesy transportation. |
| What should you do? | You should contact your GM dealer to arrange a service appointment as soon as possible. |
| Did you already pay for this repair? | If you have paid for repairs for the recall condition, please complete the enclosed form and present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if this is not convenient, you may mail the completed form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and required documents must be presented to your dealer or received by the Reimbursement Department by December 31, 2015, unless state law specifies a longer reimbursement period. Because you have already had this condition repaired, you do not need to take your vehicle to your dealer for this recall. |
| Do you have questions? | If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below. |
| Division | Number | Text Telephones (TTY) |
| Chevrolet |
1-800-222-1020 | 1-800-833-2438 |
| Guam | 65-6267-1752 | |
| Puerto Rico – English | 1-800-496-9992 | |
| Puerto Rico – Español | 1-800-496-9993 | |
| Virgin Islands | 1-800-496-9994 |
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is13V360.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Jim Moloney
General Director,
Customer and Relationshp Services
Enclosure
GM Recall #12213
SEOCONTENT-END
Q&A FOR UPCOMING SAFETY RECALL 12213
2011-2012 CHEVROLET
CRUZE POSSIBLE LOSS OF BRAKE ASSIST
Q1. What is the condition being covered?
A1. Certain 2011–2012 model year Chevrolet
Cruze vehicles equipped with 1.4L
DOHC gasoline turbo
engine
(LUJ) and 6T40 FWD automatic transmission
(MH8) have a condition in which the electric vacuum pump switch may fail to activate the vacuum pump as intended. If this occurs, brake system vacuum assist may be reduced resulting in unexpected increased brake pedal effort or stopping distance. If this happens while the vehicle is moving, a crash could result without prior warning.
Q2. How did you discover the condition?
A2. A field report for a brake performance complaint.
Q3. Have there been any reports from the field of fires, crashes or injuries related to this condition?
A3. There are 27 reports alleging low-speed crashes in our records, but none are verified. No injuries have been reported.
Q4. Where were these vehicles made?
A4. Lordstown, Ohio
Q5. Where were these vehicles sold?
A5. United States (292,879), Canada (44,789) and 641 exported to Israel.
Q6. Is my vehicle safe to drive?
A6. Yes. From a cold start, there have been reports of unexpected increased brake pedal effort resulting in increased stopping distance. The engine
itself is the main source of vacuum brake assist, so under most conditions, a driver will have full brake assist. However, in rare instances, you may need to exert more brake pressure to stop normally.
Q7. If this is an upcoming recall, why are you announcing before the bulletin is released or before the parts become available?
A7. We wanted to inform customers of the issue because of its unexpected nature.
Q8. When will I be able to get my vehicle repaired and how much will it cost me?
A8. When parts become available, you will be notified by First Class mail. Dealers will remove and replace a microswitch in the power brake vacuum pipe assembly. Repairs will be performed free of charge because most vehicles should still be under factory warranty.
Q9. Who is the supplier of the affected part/component?
A9. GM does not disclose this type of information.
Q10. What part or parts are involved?
A10. Electric vacuum pump (EVP) switch
Q11. Are parts available? If not, when will they be available?
A11. We are working closely with the supplier to expedite availability.
Q12. I am not experiencing the condition or issue that is described, but I don’t feel safe driving the vehicle. What should I do?
A12. Paraphrase answer to No. 6
2 Affected Products
Vehicle
| CHEVROLET | CRUZE | 2011-2012 |
17 Associated Documents
Remedy Instructions and TSB
RCRIT-13V360-8426P.pdf 533.244KB
To View or Download this Document Click Here
Recall Acknowledgement
Manufacturer Notices(to Dealers,etc)
Other Recall Related Documents
RCORRD-13V360-3409.pdf 161.174KB
Defect Notice(Part 573)
RCDNN-13V360-2404.pdf 180.742KB
Quarterly Performance Report
RCQPR-13V360-0114.pdf 165.003KB
Quarterly Performance Report
RCQPR-13V360-0413.pdf 77.602KB
Recall Quarterly Report – 2015-Q1
RCLQRT-13V360-4089.PDF 29.326KB
Recall Quarterly Report – 2014-Q4
RCLQRT-13V360-7803.PDF 29.206KB
Renotification Notice
RCRN-13V360-3996.pdf 185.867KB
Recall Quarterly Report – 2014-Q3
RCLQRT-13V360-1464.PDF 29.098KB
Remedy Instructions and TSB
RCRIT-13V360-8559.pdf 375.293KB
To View or Download this Document Click Here
Manufacturer Notices(to Dealers,etc)
Recall Quarterly Report – 2015-Q3
Recall 573 Report-Amendment 1
RCLRPT-13V360-5236.PDF 29.52KB
Quarterly Performance Report
RCQPR-13V360-0214.pdf 87.483KB
Recall Quarterly Report – 2015-Q2
RCLQRT-13V360-5849.PDF 29.418KB
Latest Recalls Documents
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine
light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. - Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine
trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle. - OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine
light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine
coolant temperature, get engine
speed. - Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine
information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Read Fault Codes】About the read code function needs to be in the ignition on state and if the check engine
light is on. If the vehicle is compatible with this obd2 scanner, please select correct menu & ensure no hardware/wiring issues/obd2 interface damage for accurate results. As a basic code reader, the correct menu: Select OBDII-> Wait for seconds-> Select Read codes - 【Vehicle CEL Doctor】The NT301 enables you to read DTCs, access to e-missions readiness status, turn off CEL(check engine
light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle. It works reliably as a check engine
code reader—the fault code will appear again even though you cleared before, if you don't repair the car completely. The fault code only can be cleared by NT301 after car repair finished, as like all the obd scanner's working principle - 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】 View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. This car scanner is a perfect scanner for car maintenance, compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2
- 【Advanced OBDII Modes】 This obd2 scanner diagnostic tool provides enhanced obd2 modes capabilities: O-2 sensors test and EVAP system leak monitor. It allows you to run a leak check on your car’s EVAP system and assess the fuel tank’s condition. The O-2 sensor test helps optimize the air-fuel ratio, boosting fuel economy and cutting em-issions. Saving you money on gas and reducing your vehicle’s environmental footprint
- 【OBDII Protocols & Compatibility】The NT301 supports OBDII protocols like KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. As a versatile code reader for cars and trucks—one of the most practical code readers & scan tools in its class—the device is compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs. Kindly check the vehicle compatibility before the purchase since the function comatibility and car compatibility vary from different car models, year and vin
- UNDERSTAND YOUR CHECK ENGINE
LIGHT – The ANCEL AD410 OBD2 scanner helps everyday drivers quickly read and clear engine
-related fault codes, view code definitions, and understand why the check engine
light is on before visiting a repair shop. With 42,000+ built-in DTC lookups, this car code reader helps reduce guesswork and makes basic vehicle diagnostics easier for beginners and DIY users - FULL OBD2 DIAGNOSTICS MADE SIMPLE – More than a basic engine code reader, this OBD2 scanner diagnostic tool supports key OBDII functions including reading/clearing codes, live data, freeze frame, I/M readiness, O2 sensor test, EVAP test, vehicle information, and MIL status. It helps you check your car’s condition, verify repairs after the issue is fixed, and communicate with mechanics more confidently
- LIVE DATA & REAL-TIME VEHICLE INSIGHTS – View real-time engine data such as RPM, coolant temperature, fuel trim, oxygen sensor readings, and other available OBD2 parameters directly on the screen. These live data readings help you better understand how your vehicle is running, spot abnormal patterns, and make more informed repair decisions instead of relying only on a warning light
- SMOG CHECK READINESS AT A GLANCE – Use the I/M readiness function before a smog check or emissions inspection to see whether your vehicle’s monitors are ready. This OBD2 code scanner helps you confirm if recent repairs have brought the system back to a ready state, reducing the chance of failed inspections, retests, wasted trips, and unnecessary inspection fees
- WORKS WITH MOST OBD2 VEHICLES – Compatible with most 1996 and newer U.S.-based OBD2 cars, SUVs, and light trucks, as well as many 2000 and newer EU/Asian OBD2 vehicles. Supports major OBDII protocols including CAN, ISO9141, KWP2000, J1850 VPW, and J1850 PWM. This automotive diagnostic scanner is designed for wide vehicle coverage; please check compatibility with your vehicle before purchase
- [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [Broad Make & Model Coverage] Strong support for GM, Ford
, Stellantis (RAM, Jeep, Chrysler), Toyota
, Honda, Nissan
, Mazda, Subaru
, Hyundai, Mercedes-Benz, BMW, and VW.
This product presentation was made with AAWP plugin.







My daughter has a 2012 Chevrolet Cruz. It had the brake vacumn micro switch replaced on a recall at 50,000 miles. Now at 84,000 miles it failed and she was involved in a wreck because she had no brakes to stop. This is serious. She could have been killed. She rear ended a Yukon!!! She hasn’t had a car for 6 weeks since they are investigating. How can I feel safe putting her back in that car if those switches that they replace are still faulty?
Make sure to file a complaint with the NHTSA https://www-odi.nhtsa.dot.gov/VehicleComplaint/
To whom it my concern This is a recurring problem Recall# 12213 I recently told the dealership shop about it they just printed up a report saying it was already taken care of same with my leaky water pump that was previously changed under a recall I just paid $899 to fix a problem that GM knows about All of this makes me 2nd guess the recall repairs made to the air bags and fuel tank and such I bought this car new I was told it was the safest car out and now I am driving around with brakes that don’t work as they should I have told the dealership about it when I bring it in for oil changes I was told its not doing it now so really can’t do anything I just paid $1200 for a turbo not even a year ago Its going to be hard to buy another GM vehicle