NHTSA ID Number: 10090054
Manufacturer Communication Number: 14636
Summary
14636 – SPECIAL COVERAGE. SOME 2009 MODEL YEAR BUICK LACROSSE AND ALLURE VEHICLES AND 2009-2011 MODEL YEAR CHEVROLET IMPALA VEHICLES MAY HAVE A BROKEN SOLDER CONNECTION WITHIN THE ACCELERATOR PEDAL POSITION (APP) SENSOR. THIS CONDITION MAY RESULT IN REDUCED ENGINE POWER AND LOSS OF TRACTION CONTROL ASSIST. ALL OTHER ACCESSORIES AND VEHICLE SYSTEMS WILL FUNCTION NORMALLY. WHILE THE CONDITION IS PRESENT, THE DRIVER INFORMATION CENTER WILL DISPLAY “ENGINE POWER IS REDUCED”, AND MAY ALSO DISPLAY “SERVICE TRACTION CONTROL” AND “SERVICE STABILITRAK”. DEALERS ARE TO REPLACE THE ACCELERATOR PEDAL ASSEMBLY.
Condition
Some 2009 model year Buick Lacrosse and Allure vehicles and 2009-2011 model year Chevrolet Impala vehicles may have a broken solder connection within the accelerator pedal position (APP) sensor. This condition may result in reduced engine power and loss of traction control assist. All other accessories and vehicle systems will function normally. While the condition is present, the driver information center will display “Engine Power is Reduced,” and may also display “Service Traction Control” and “Service Stabilitrak”.
Special Coverage Adjustment
This special coverage covers the condition described above for a period of 10 years or 120,000 miles (193,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership.
Dealers are to replace the Accelerator Pedal Assembly. The repairs will be made at no charge to the customer.
For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after April 7, 2015, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to April 7, 2015, must be submitted to the Service Contract provider.
Parts
| Description | Quantity/Vehicle | Part Number |
| Pedal Assembly – Accelerator | 1 | 22742315
22742315 PEDAL 3.451
|
5 Affected Products
Vehicles
1 Associated Document
Service Bulletin Document
Bulletin No.: 14636
Date: April 2015
https://www.nhtsa.gov/recalls?nhtsaId=10090054
SB-10090054-2280.pdf 484.191KB
NHTSA ID Number: 10058688
Manufacturer Communication Number: SC-14636
Summary
CHEVROLET/BUICK: SOME VEHICLES WILL OR MAY HAVE, WITHIN ACCELERATOR PEDAL POSITION SENSOR, A BROKEN SOLDER CONNECTION CAUSING REDUCTION IN ENGINE POWER AND TRACTION CONTROL ASSIST LOSS. MODEL 2009 LACROSSE, ALLURE, 2009-11 IMPALA. *PE
1 Associated Document
Customer Satisfaction Campaigns
Bulletin No.: 14636
April 2015
https://www.nhtsa.gov/recalls?nhtsaId=10058688
CSC-10058688-1937.pdf 121.222KB
- 【You can always trust Thinkcar】Not happy with the product? If you experience any issues with the product after purchase(functions doesn't work or receive a used product), not sure about the compatibility with your car, please directly message to support @ mythinkcar. com, we also offer online technical support and consultation services to help you quickly get started, even if it's your first time. For select functions, we provide step-by-step guides, video tutorials, and direct support to ensure a smooth experience.
- 【Engineered for Excellence】Favored by A Tremendous Loves of Users, from DIYers and technicians to top automotive influencers. The new intelligent AI-powered THINKSCAN 689BT PRO diagnostic tool provides comprehensive workshop solutions and diagnostic capabilities, topology mapping, J2534 pass-thru solution, new developed Tyler AI Agent, full bidirectional control, 35+ services, PMI, CANFD, DoIP, FCA gateway. While excellent software innovation requires stable hardware support. The THINKSCAN 689BT PRO is driven by Android 10, 4-core high-speed CPU, 4GB RAM, 64GB ROM, ensure 5X faster performance and empowers technicians to repair cars more efficiently, and deliver results with confidence.
- 【J2534 Pass-Thru Support】Featuring an innovative factory-level VCI with the latest J2534 protocol standards, the THINKSCAN 689BT PRO scanner can function as a pass-thru device to achieve direct connectivity seamlessly with mainstream OEM softwares, including GDS2, Forscan, Witech2.0, ODIS, Techstream, ect. This means that with just one device, you can easily access factory level diagnostic, pr0gramming and maintenance functions on multiple brand models, greatly helping technicians get from scan to solution faster than ever.
- 【Pro-Level Topology Mapping for Full System Insight】The THINKSCAN 689BT PRO now features newly integrated topology mapping. It provides a complete and intuitive overview of complex system interconnections for the vehicle, displaying each accessible control module in different colors at a glance, as well as system counts, scanned systems, and diagnostic results. No need for endless scrolling menus, this smart zoom, pan, and highlight specific modules allows for pinpoint module selection. With the support of AI, you can also easily identify the cause of faults and obtain step-by-step repair assistance - empowering you with dealer-level intelligence and excellent efficiency at workshop speed.
- 【Revolutionary Tyler AI Intelligent Scan Tool】Stop wasting cycles on manual code lookups and repetitive cross-referencing. The THINKSCAN 689BT PRO's Tyler AI intelligent system works as a full-time AI expert— it automatically retrieve fault codes, generate reports, capture data for post-scan review, and analyze underlying vehicle issues in real time. But that's just the baseline. The built-in THINKAI chatbot takes it further: ask it any question you wanna know, it delivers instant, context-aware troubleshooting guidance and technical resources without forcing you to flip through service manuals
, Tyler AI Agent gives you the confidence of a pro, right from your driver's seat.
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car
- 2026 Advanced ECU Coding Scan Tool: Maximize the capabilities of your vehicles with the ArtiDiag Pro. This scan tool, seamlessly compatible with renowned models such as VW, A-U-D-I, SKODA, SEAT, BENZ, and more, empowers you to uncover hidden features, deactivate annoying functions, and code retrofitted components for peak performance. Ensure a backup before coding and steer clear of problems on low battery levels.
- Efficient Diagnostics with Bidirectional Control: Say goodbye to uncertainty, streamline diagnostics, and reclaim valuable time with ArtiDiag Pro scan tool. This bidirectional scan tool exceeds expectations, enabling targeted tests on individual actuators to swiftly identify and resolve issues. Covering lights, door locks, fuel and coolant systems, windows, wipers, EVAP, and more in vehicle components.
- 35+ Services Resolve 90% of Repair Challenges: Unleash maximum productivity with the ArtiDiag Pro, a scan tool that tackles 90% of maintenance issues through its 35 special functions. Effortlessly clear oil maintenance indicators with oil reset. Engage the EPB Reset for brake system management and establish precise alignment with the Steering Angle Reset to define the straight-line reference position for your vehicle.
- FCA Autoauth : This diagnostic tool supports Autoauth for FCA SGW/Renault, Chrysler, Jeep, Dodge, Fiat etc. 2017 and later. NOTE: Due to Product Upgrade, there is no Chrysler 12+8 adapter, the BMW-20 Adapter in the package any more. We are sincerely sorry for the inconvenience. NOTE: Please confirm compatibility before purchase.(Topdon Website>Support>Vehicle Coverage)
- Professional Customer Support: At TOPDON, your satisfaction is our unwavering commitment. Experience hassle-free support and a lifetime of expert assistance. Should you encounter any challenges, reach out to us at 833-629-4832. For returns, please damage the packaging to prevent Amazon from reselling it. Please be advised that after two years, a subscription fee of 249 Bucks will apply.
- [Diagnose Like a Pro] BlueDriver Pro Next-Gen is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission, and more on supported vehicles, including expanded coverage on newer model years.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Expanded Make & Model Coverage] Optimized for today’s vehicles with strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW. Enhanced communication on select 2024+ Nissan and Mazda models (see compatibility chart).
- [Gas Vehicles 1996+ & Select Light-Duty Trucks] Works with all gas-powered vehicles made in 1996 or newer, plus select light-duty trucks and diesels, including F-250, RAM 2500, Silverado, and Sierra. Built for daily drivers, family vehicles, and real-world truck use.
SEOCONTENT-START
Copyright 2015 General Motors
. All Rights Reserved. Service Bulletin Bulletin No.: Date: 14636 April 2015 SPECIAL COVERAGE SUBJECT: Special Coverage Adjustment – Reduced Engine Power / Accelerator Pedal Position Sensor MODELS: 2009 Buick Lacrosse 2009 Buick Allure (Canada) 2009-2011 Chevrolet Impala CONDITION Some 2009 model year Buick Lacrosse and Allure vehicles and 2009-2011 model year Chevrolet Impala vehicles may have a broken solder connection within the accelerator pedal position (APP) sensor. This condition may result in reduced engine power and loss of traction control assist. All other accessories and vehicle systems will function normally. While the condition is present, the driver information center will display “Engine Power is Reduced,” and may also display “Service Traction Control” and “Service Stabilitrak”. SPECIAL COVERAGE ADJUSTMENT This special coverage covers the condition described above for a period of 10 years or 120,000 miles (193,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. Dealers are to replace the Accelerator Pedal Assembly. The repairs will be made at no charge to the customer. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after April 7, 2015, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to April 7, 2015, must be submitted to the Service Contract provider. VEHICLES INVOLVED All involved vehicles are identified by Vehicle Identification Number on the Applicable Warranties section in GM Global Warranty Management system. Dealership service personnel should always check this site to confirm vehicle involvement prior to beginning any required inspections and/or repairs. It is important to routinely use this tool to verify eligibility because not all similar vehicles may be involved regardless of description or option content. Page 2 April 2015 Bulletin No.: 14636 PART INFORMATION Parts required to complete this special coverage are to be obtained from General Motors
Customer Care and Aftersales (GMCC&A). Please refer to your “involved vehicles listing” before ordering parts. This part will be on Order Writing control initially and all DRO’s (Daily Replenishment Orders) will cancel. Dealers can place orders CSO (Customer Special Order). In emergency situations a dealer should place a SPAC case and the orders will be processed in the order received. Important: Due to limited initial parts availability, dealers are encouraged not to order recall parts for use as shelf stock. Parts should only be ordered when inspection determines that it is necessary to replace the pedal assembly. Part Number Description Quantity/Vehicle 22742315 Pedal Assembly – Accelerator 1 SERVICE PROCEDURE Diagnostic Information 1. Verify that the Accelerator Pedal Assembly requires replacement. 2. Refer to the appropriate diagnostic information in SI. If relevant DTC’s (P2122, P2123, P2120, P2127, P2128, P2125, or P2138) are set that could be related to the Accelerator Pedal Position APP sensor, refer to the specific diagnostics for those DTC’s in SI, along with the following service bulletins for reference: 07-06-04-019: Intermittent Malfunction Indicator Lamp (MIL) Illuminated, DTC P2138 with Reduced Engine Power. 08-06-04-041: Malfunction Indicator Lamp – Check Engine Light On, Hesitation, Reduced Engine Power Message, DTCs P1125, P2101, P2120, P2125 or P2138 Set If the Accelerator Pedal Assembly does NOT require replacement, no further action is required. Inform the customer that any additional diagnosis and repairs are not covered under this special coverage. If the Accelerator Pedal Assembly requires replacement, refer to the procedure below. Page 3 April 2015 Bulletin No.: 14636 Accelerator Pedal Replacement 1618780 1. Remove the accelerator pedal. Refer to Accelerator Pedal Position Sensor Replacement in SI. 4089974 Note: The new replacement pedal (1) has a redesigned mounting bracket, which is shaped differently than the original pedal (2). Its installation requires cutting away a small portion of the insulator/sound dampening material under the instrument panel, to allow the new pedal to attach to the body. Page 4 April 2015 Bulletin No.: 14636 4089975 2. Using the new replacement pedal as a template, trace a line onto the insulator material that would designate the material to be removed due to interference on the new design part. 3. Use a sharp knife, or suitable cutting tool, to cut away the small amount of material. 4089973 Install the new accelerator pedal (1). Refer to Accelerator Pedal Position Sensor Replacement in SI. CUSTOMER REIMBURSEMENT – For US Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to be submitted to the dealer by April 30, 2016 unless otherwise specified by state law. If this is not convenient for the customer, the customer may mail the completed Customer Reimbursement Request Form and all required documents to the GM Customer Assistance Center. Repairs must have occurred within the 10 years of the date the vehicle was originally placed in service, or 120,000 miles, whichever occurs first. Page 5 April 2015 Bulletin No.: 14636 All reasonable and customary costs to correct the condition described in this bulletin should be considered for reimbursement. Any questions or concerns should be reviewed with your GM representative prior to processing the request. When a customer requests reimbursement, they must provide the following: A completed Customer Reimbursement Request Form. This form is mailed to the customer or can be obtained through GM GlobalConnect. The name and address of the person who paid for the repair. Paid receipt confirming the amount of the repair expense, a description of the repair, and the person or entity performing the repair. IMPORTANT: GM requires dealers to approve or deny a reimbursement request within 30 days of receipt. If a reimbursement request is approved, the dealer should immediately issue a check to the customer and submit an appropriate warranty transaction for the incurred expense. If a reimbursement request is denied, the dealer MUST provide the customer with a clear and concise explanation, in writing, as to why the request was denied. The bottom portion of the Customer Reimbursement Request Form may be used for this purpose. If the denial was due to missing documents, the customer can resubmit the request when the missing documents are obtained, as long as it is still within the allowed reimbursement period. Warranty transactions for customer reimbursement of previously paid repairs are to be submitted as required by GM Global Warranty Management. Additional information can also be found in Warranty Administration Bulletin 11-00-89-004. CUSTOMER REIMBURSEMENT – For Canada and Export Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to be submitted to the dealer prior to or by April 30, 2016. Repairs must have occurred within the 10 years of the date the vehicle was originally placed in service, or 193,000 kilometers, whichever occurs first. When a customer requests reimbursement, they must provide the following: – Proof of ownership at time of repair. – Original paid receipt confirming the amount of unreimbursed repair expense(s) (including Service Contract deductibles), a description of the repair, and the person or entity performing the repair. All reasonable and customary costs to correct the condition described in this bulletin should be considered for reimbursement. Any questions or concerns should be reviewed with your GM representative prior to processing the request. COURTESY TRANSPORTATION – For US and Canada The General Motors
Courtesy Transportation program is intended to minimize customer inconvenience when a vehicle requires a repair that is covered by the New Vehicle Limited Warranties. The availability of courtesy transportation to customers whose vehicles are Page 6 April 2015 Bulletin No.: 14636 within the warranty coverage period and involved in a product program is very important in maintaining customer satisfaction. Dealers are to ensure that these customers understand that shuttle service or some other form of courtesy transportation is available and will be provided at no charge. Dealers should refer to the General Motors
Service Policies and Procedures Manual for Courtesy Transportation guidelines. WARRANTY TRANSACTION INFORMATION Submit a transaction using the table below. All transactions should be submitted as a ZREG transaction type, unless noted otherwise. Note: To avoid having to “H” route the customer reimbursement transaction for approval, it must be submitted prior to the repair transaction. Labor Code Description Labor Time Net Item 9900140 Diagnostic Time Only – No Repair Required 0.1-0.3 N/A 4080878 Accelerator Pedal Replacement – For use with vehicles still covered under warranty 0.5 N/A Add: Diagnostic Time 0.1-0.3 9900141 Accelerator Pedal Replacement (Incl. trim insulator material) 0.5 N/A Add: Diagnostic Time 0.1-0.3 9900142 Customer Reimbursement Approved 0.2 * 9900143 Customer Reimbursement Denied – For US dealers only 0.1 N/A * The amount identified in “Net Item” should represent the dollar amount reimbursed to the customer. CUSTOMER NOTIFICATION General Motors
will notify customers of this special coverage on their vehicles (see copy of typical customer letter included with this bulletin – actual divisional letter may vary slightly). GM bulletins are intended for use by professional technicians, NOT a “do-it-yourselfer”. They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer/retailer for information on whether your vehicle may benefit from the information. We Support Voluntary Technician Certification Page 7 April 2015 Bulletin No.: 14636 April 2015 This notice applies to your vehicle, VIN: _____________________________________ Dear General Motors
Customer: As the owner of a 2009 model year Buick Lacrosse or Allure vehicle or a 2009-2011 model year Chevrolet Impala vehicle your satisfaction with our product is very important to us. This letter is intended to make you aware that some 2009 model year Buick Lacrosse and Allure vehicles and 2009-2011 model year Chevrolet Impala vehicles may have a broken solder connection within the accelerator pedal position (APP) sensor. This condition may result in reduced engine power and loss of traction control assist. All other accessories and vehicle systems will function normally. While the condition is present, the driver information center will display “Engine Power is Reduced,” and may also display “Service Traction Control” and “Service Stabilitrak Do not take your vehicle to your GM dealer as a result of this letter unless you believe that your vehicle has the condition as described above. What We Have Done: General Motors
is providing owners with additional protection for the condition described above. If this condition occurs on your 2009 model year Buick Lacrosse or Allure vehicle or 2009-2011 model year Chevrolet Impala vehicle within 10 years of the date your vehicle was originally placed in service or 120,000 miles (193,000 km), whichever occurs first, the condition will be repaired for you at no charge. Diagnosis or repair for conditions other than the condition described above is not covered under this special coverage program. What You Should Do: If you believe that your vehicle has the condition described above, repairs and adjustments qualifying under this special coverage must be performed by a General Motors
dealer. You may want to contact your GM dealer to find out how long they will need to have your vehicle so that you may schedule the appointment at a time that is convenient for you. This will also allow your dealer to order parts if they are not already in stock. Keep this letter with your other important glove box literature for future reference. Reimbursement: If you have paid for repairs for the condition described in this letter, please complete the enclosed reimbursement form and present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if this is not convenient, you may mail the completed reimbursement form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and required documents must be presented to your dealer or received by the Reimbursement Department by April 30, 2016, unless state law specifies a longer reimbursement period. If you have any questions or need any assistance, just contact your dealer or the appropriate Customer Assistance Center at the number listed below. Page 8 April 2015 Bulletin No.: 14636 Division Number Text Telephones (TTY) Buick 1-800-521-7300 1-800-832-8425 Chevrolet 1-800-222-1020 1-800-833-2438 Guam 65-6267-1752 Puerto Rico – English 1-800-496-9992 Puerto Rico – Español 1-800-496-9993 Virgin Islands 1-800-496-9994 We are sorry for any inconvenience you may experience; however, we have taken this action in the interest of your continued satisfaction with our products. Alicia S. Boler-Davis Sr. Vice President Global Connected Customer Experience Enclosure 14636 GM CUSTOMER CARE AND AFTERSALES DCS3619 URGENT – DISTRIBUTE IMMEDIATELY Date: April 7, 2015 Subject: 14636 – Special Coverage Adjustment Reduced Engine Power / Accelerator Pedal Position Sensor Models: 2009 Buick Lacrosse 2009 Buick Allure (Canada) 2009-2001 Chevrolet Impala To: All Buick and Chevrolet Dealers Attention: General Manager, Service Advisor, Service Manager, Parts and Service Director, Parts Manager, New Vehicle Sales Manager, and Warranty Administrator General Motors
is releasing Special Coverage Adjustment 14636 today. The total number of U.S. vehicles involved is approximately 546,000. Please see the attached bulletin for details. Customer Letter Mailing The customer letter mailing will begin on April 21, 2015. Global Connect (GWM) The “Investigate Vehicle History” (IVH) screen will be updated April 10, 2015. Campaign Initiation Detail Report (CIDR) The CIDR is not available for Special Coverage Adjustments. END OF MESSAGE GM CUSTOMER CARE AND AFTERSALES
**************************************************************************************************************
Page 7 April 2015 Bulletin No.: 14636 April 2015 This notice applies to your vehicle, VIN: _____________________________________ Dear General Motors
Customer: As the owner of a 2009 model year Buick Lacrosse or Allure vehicle or a 2009-2011 model year Chevrolet Impala vehicle your satisfaction with our product is very important to us. This letter is intended to make you aware that some 2009 model year Buick Lacrosse and Allure vehicles and 2009-2011 model year Chevrolet Impala vehicles may have a broken solder connection within the accelerator pedal position (APP) sensor. This condition may result in reduced engine power and loss of traction control assist. All other accessories and vehicle systems will function normally. While the condition is present, the driver information center will display “Engine Power is Reduced,” and may also display “Service Traction Control” and “Service Stabilitrak Do not take your vehicle to your GM dealer as a result of this letter unless you believe that your vehicle has the condition as described above. What We Have Done: General Motors
is providing owners with additional protection for the condition described above. If this condition occurs on your 2009 model year Buick Lacrosse or Allure vehicle or 2009-2011 model year Chevrolet Impala vehicle within 10 years of the date your vehicle was originally placed in service or 120,000 miles (193,000 km), whichever occurs first, the condition will be repaired for you at no charge. Diagnosis or repair for conditions other than the condition described above is not covered under this special coverage program. What You Should Do: If you believe that your vehicle has the condition described above, repairs and adjustments qualifying under this special coverage must be performed by a General Motors
dealer. You may want to contact your GM dealer to find out how long they will need to have your vehicle so that you may schedule the appointment at a time that is convenient for you. This will also allow your dealer to order parts if they are not already in stock. Keep this letter with your other important glove box literature for future reference. Reimbursement: If you have paid for repairs for the condition described in this letter, please complete the enclosed reimbursement form and present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if this is not convenient, you may mail the completed reimbursement form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and required documents must be presented to your dealer or received by the Reimbursement Department by April 30, 2016, unless state law specifies a longer reimbursement period. If you have any questions or need any assistance, just contact your dealer or the appropriate Customer Assistance Center at the number listed below. Page 8 April 2015 Bulletin No.: 14636 Division Number Text Telephones (TTY) Buick 1-800-521-7300 1-800-832-8425 Chevrolet 1-800-222-1020 1-800-833-2438 Guam 65-6267-1752 Puerto Rico – English 1-800-496-9992 Puerto Rico – Español 1-800-496-9993 Virgin Islands 1-800-496-9994 We are sorry for any inconvenience you may experience; however, we have taken this action in the interest of your continued satisfaction with our products. Alicia S. Boler-Davis Sr. Vice President Global Connected Customer Experience Enclosure 14636
SEOCONTENT-END
This product presentation was made with AAWP plugin.







Same issue with a 2006 Buick lacrosse. Thought i was going to have to walk home one night when i left work. I replaced the throttle body ,the gas pedal and the ecm and still has the same codes and is still in limp mode.
I have the same issue with a 2007 Impala SS will you cover it also I have had more repairs than I paid for the car new and now am disabled and am just getting by just do city streets and watch what is going on closely
Who do we contact to see about getting this issue resolved bcuz I’ve already had the throttle body replaced and the refused engine power is still happenong
Your local GM Dealer.
I have a 2007 check impala everyone wants to charge me outrageous price to try and fix the issue
My family was on the interstate and almost got ran over by a semi the service traction control engine power reduce light came on and dropped my speed to 40
Very disappointed I love my car and can’t afford another one I have a feeling they won’t recall until someone get hurt shaking my head it’s all about the money
Same Place in life Jessica and also a 2007 impala ss.
This problem occurred in Feb 2017 on my 2010 Impala while in Myrtle beach S.C., the day before I was to start for home. (Ontario) I attended a local long time Chev/Cadillac dealer in Myrtle Beach who read my vehicles computer and advised that this particular sensor was faulty and charged me $400.51 U.S. ($538.47 Cdn) to fix my car so I could go home. I was between a rock and a hard spot and was clearly taken advantage of. When I arrived home, I was advised by my local dealer that this problem should have been repaired for FREE. (Special Warranty) As of May 30/17, I, still waiting for my $538.47 refund
I have a 2015 Impala and this is happening. Going to get it fixed and then trade for another vehicle (Not a chevy).
I am having the same issue with my 2009 Buick Allure CXL. Did you get the issues resolved and if so what was the problem?
I have an 2006 Impala with the same problem, GMC just wants to start changing parts could be this could be that. Of course out of warranty and have to pay out of pocket. VERY dangerous and GM should do a recall seems to be a big issue
This malfunction is very serious when it occurs on the freeway as no indication is given to following traffic that you are slowing down. This is my 6 gmc vehicle and this irritant is the most i have ever encountered. garages do not have answer except to charge to use diagnostic meter to clear alarm.