| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161937
Manufacturer Communication Number: 18NA172
Summary
This technical bulletin provides a procedure to modify the right rear exhaust control valve actuator to correct a rattle noise heard from the rear of the vehicle.
10 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| CHEVROLET | CAMARO | 2016-2019 |
| CHEVROLET | CORVETTE | 2014-2019 |
SEOCONTENT-START
Bulletin No.: 18-NA-172
Date: May, 2019
Service Bulletin
TECHNICAL
Subject: Rattle Type Noise Heard from Rear of Vehicle
| Brand: | Model: | Model Year: | VIN: | Engine: | Transmission: | |||
| from | to | from | to | |||||
| Chevrolet | Camaro | 2016 | 2019 | Equipped with 6.2L Engine (RPOs LT1, LT4) | ||||
| Corvette | 2014 | Equipped with 6.2L Engine (RPOs LT1, LT4, LT5) | ||||||
| Involved Region or Country | North America and N.A. Export Regions |
| Additional Options (RPOs) | Vehicles equipped with EXHAUST SYSTEM-PERFORMANCE (RPO NPP) |
| Condition | Some customers may comment on a rattle type noise heard coming from the rear of the vehicle. |
| Cause | This condition may be caused by the right rear exhaust control valve actuator. |
| Correction | Modify the right rear exhaust control valve actuator following the Service Procedure below. |
Service Procedure
- Remove the right rear exhaust control valve actuator from the pipe. Refer to Exhaust Control Valve Actuator Replacement in SI.
5080869
- Use a vise to hold the actuator and cut off the leg,as shown in the illustration above, using a die grinder or cut-off wheel.
Important: DO NOT remove the metal coupling disc from the actuator. If removed, you will disrupt the Loctite’d screw and would need to relearn the valves since the alignment may have changed.
Warranty Information
For vehicles repaired under the Emission coverage, use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time |
| 4086258* | Removing Leg Off of the Right Rear Exhaust Control Valve Actuator | 0.7 hr |
| *This is a unique Labor Operation for Bulletin use only. | ||
| Version | 3 |
| Modified | Released May 22, 2018
August 10, 2018 – Added the 2019 Model Year and the Corvette Model. May 16, 2019 – Added the 2016-2017 Camaro Models and 2014-2017 Corvette Models. |
SEOCONTENT-END
Bulletin No.: 18-NA-172
Date: May, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161937
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161937-9999.pdf
To View or Download this Document Click Here
SEOCONTENT-START
Loading...
Reload document 
Open in new tab
| “This site contains affiliate links for which OEMDTC may be compensated” |
Bestseller No. 1
Spec-D Tuning Dual Catback Exhaust System Muffler Titanium Tip Burnt Tip Compatible with Chevy Camaro 2010-2015
- ✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!
- ✔️ Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
- ✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
- ✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
- ✔️ FITMENT: Compatible with Chevy Camaro 3.6L V6 engine 2010-2015 models only.
Bestseller No. 2
DNA MOTORING CBE-UR-006 4 Inches Oval Style Muffler Axle-Back Exhaust Systems Compatible with 2010-2015 Chevy Camaro 6.2L
- AXLE-BACK EXHAUST - Oval Style Mufflers; 4" Double Walled Round Diagonal Cut 304 Stainless Steel Polished; Inlet Size: 2.5" OD / Major Diameter: 3" OD / Outlet Size : 4" OD
- FITMENT - Compatible with Chevrolet Camaro 6.2L 10-15
- STRENGTH CONSTRUCTION -Made of High Quality Aluminized Steel with Computerized Mandrel-Bends for Strength and Durability; TIG Welded CNC Machine for Resistance against Pressure and Corrosion
- INSTALLATION - Slip Fit Piping / Clamp On Design; High Performance Racing Spec. Design; can Make you enjoy the Best Performance in the Fastest Time
- NOTE - Professional Installation is Highly Recommended; Installation Instruction is NOT Included.
Bestseller No. 3
Borla 11776 Rear Section Exhaust Kit - CAMARO '10 3.6L V6 AT/MT RWD 2DR
- Piping diameter: 2.25"
Bestseller No. 4
Borla 140495 Cat-Back Exhaust System for Chevy Camaro ZL1
- Full stainless steel exhaust for maximum durability and corrosion resistance
- Custom aggressive mufflers tuned to generate the highest quality exhaust tone possible
- Straight through exhaust system to maximize exhaust flow and minimize backpressure to boost performance
- Full system is back up by a million mile warranty
Bestseller No. 5
Mishimoto MMEXH-CAM8-16AQTPP Pro Axleback Exhaust Compatible With Chevrolet Camaro SS Quad Tip 2016-2018 Polished
- Cut and clamp design specifically for the 2016+ Chevrolet Camaro SS
- Converts stock dual tip exhaust to quad tip style
- Aggressive exhaust tone during acceleration and deceleration
- Designed with small diameter mufflers and drone-reducing resonators but does not compromise maximum sound
- 3" overall diameter helps maintain proper exhaust velocity
Bestseller No. 6
MBRP S7021AL Exhaust System
- Item Package Dimension: 27.0L x 10.0W x 9.0H inches
- Item Package Weight - 36.80 Pounds
- Item Package Quantity - 1
- Product Type - MUFFLER
Bestseller No. 7
Dual 4 Inches OD Muffler Tip Axle Back Catback Exhaust System Compatible with Chevy Camaro 6.2L V8 16-18
- ▶️ Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability
- ▶️ Slip-On Clamp Installation; Eliminates Factory Style Mufflers; Polished Tips
- ▶️ Piping Inlet Size: 3" OD; Major Piping Diameter: 3" OD
- ▶️ 4" Double Walled Round Diagonal Cut Tip
- ▶️ Fits vehicles with Single Tip Exhaust
Bestseller No. 8
![DNA MOTORING CBE-MU-CC16-20L Cat Back Exhaust System [Compatible with 16-18 Chevy Camaro 2.0L 3.6L ]](https://m.media-amazon.com/images/I/41sbjFUlkRL._SL160_.jpg)
DNA MOTORING CBE-MU-CC16-20L Cat Back Exhaust System [Compatible with 16-18 Chevy Camaro 2.0L 3.6L ]
- 【FITMENT】Compatible with 16-18 Chevy Camaro 2.0L 3.6L
- 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability
- 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency.
- 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion.
- 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound.
Bestseller No. 9
Borla 140280 Cat-Back Exhaust System - CAMARO '10 6.2L V8 AT/MT RWD 2DR
- Piping Diameter: 2.5"
- Exit: Split rear
- Tip Style: Single round rolled angle cut
- Tip Size: 4.5" round x 5.75"
- S-type' muffler
Bestseller No. 10
DNA Motoring CBE-UR-012 Pair of Oval Type Muffler Axle-Back Exhaust Compatible with 16-19 Chevy Camaro SS 6.2L 4" OD IN / 3" OD Inlet / 3" OD Outlet
- AXLE-BACK EXHAUSTS - Oval Type Muffler; Inlet / Outlet Size: 3" OD; Major Diameter: 3" OD; 4" Double Walled Round Diagonal Cut 304 Stainless Steel Polished
- FITMENT: Compatible with 2016-2019 Camaro SS with 6.2LEngine; Does NOT fit Vehicles fitted With Performance Exhaust Option (QuadTip).
- HIGH PERFORMANCE RACING SPEC. DESIGN - i.e. maximizing smoothest high exhaust air flow rate; Aggressive deep sound while ensures smooth exhaust gas flow.
- STRENGTH CONSTRUCTION - Made of high quality steel with computerized mandrel-bends for strength and durability.TIG welded CNC machine for resistance against pressure and corrosion.
- INSTALLATION - Replaces factory style mufflers; Welded on exhaust hangers; Note: Professional Installation is Highly Recommended; Installation Instruction is NOT Included.
Last update on 2024-04-06 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.