NHTSA ID Number: 10161044
Manufacturer Communication Number: PIP5412A
Summary
This Preliminary Information communication advises the technician on the steps to diagnose the intermittent noise of center bearing slinger and rubber bearing support. Technician is directed to replace propeller shaft.
2 Affected Products
SEOCONTENT-START
Bulletin No.: PIP5412A Published date: 05/23/2019
Preliminary Information
PIP5412A Whine Howl Noise From Under Center Of Vehicle
Models
Brand: Model: Model Years:
VIN:
from to
Engine: Transmissions:
Cadillac
CT6l 2016 – 2017
All All All All
Supersession Statement
PIP5412B Supersedes PIP5412A on 5/23/2019 please discard all previous versions.
Involved Region or Country: North America
Condition: Squeal howl whine noise from under center of vehicle.
May be
intermittent and more pronounced on acceleration.
Contact between the center bearing slinger and the rubber bearing support. Inspect the bearing and
slinger for the following conditions. Picture 1. showing contact between the slinger and rubber.
Picture 2
Cause:
showing the backside of the bearing as the bearing moving rearward allows the slinger to move rear
ward. Picture 3 shows proper clearance between the slinger and rubber. Picture 4 shows proper
bearing
tallation.
Correction:
Replace rear driveshaft assembly.
Ensure that when the replacement shaft is installed the bearing support is installed in such a
manner to not load the bearing in the rubber mount.
Inspect the replacement drive shaft for clearance between the slinger and rubber mount. Clearance
should be between .7 and 1 mm (.027-.040 in).
See photos below. Picture 5, make sure bearing mount is in the groove on both sides and centered in
the bolt holes on the left and right.
Service Procedure;
See Propeller Shaft Replacement in service information.
Warranty Information
Labor Operation: Description:
Labor Time: 3020410
Propeller Shaft Replacement
1.7
Version History
Version 3
8/3/2016 – Created
Modified
5/23/2019 – Edited content and title line
SEOCONTENT-END
Bulletin No.: PIP5412A
Published date: 05/23/2019
To View or Download this Document Click Here
Bulletin No.: PIP5412
Date: Aug-2016
To View or Download this Document Click Here
- FlexFill squeezable pouch releases 2X more fluid with less effort for 3X faster filling vs. traditional bottle packaging
- Contains limited slip for optimal performance of the clutch pack, while also delivering 30% better protection against towing and heavy loads and 1.5X better gear wear protection
- Advanced full synthetic helps prevent noise and reduce chattering, while protecting gear teeth from wearing out prematurely
- High and low temperature protection ranges from -50F to 300F degrees for cold temperature fluidity and high temperature performance
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Works in tight spaces and makes gear oil easier to use
- Full Synthetic formula for exceptional high and low temperature protection
- Contains an extreme pressure additive for better load carrying capacity and wear protection
- Excellent thermal stability designed to protect oil from high temperature breakdown
- Helps provide outstanding thermal stability for cleanliness and longer service life
- Contains special additives to assist in protecting gear teeth from rust and corrosion and reduce chattering in limited-slip differentials
- Recommended for conventional and limited slip differentials and non-synchronized manual transmissions where API GL-5 or API GL-4 fluid is specificed
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Contains a limited slip additive for optimal clutch pack performance
- Daily Protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Outstanding high and low temperature protection ranges from -30F to 350F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Heavy duty
- High performance
- Stands up to high temperatures
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





