NHTSA ID Number: 10161047
Manufacturer Communication Number: PIP5298B
Summary
This Preliminary Information communication provides information to the technician for a Service Engine Soon light with a Diagnostic Trouble code P0300 set. There may be a rough running engine associated with this concern. If service information diagnostics have been completed and there is still no trouble found, the technician is to inspect for a possible terminal tension concern on the ignition coil power feed for the cause of the rough running engine and or the P0300. For the Service Engine Soon light or traction control lamp concern check the X2 connector of the under hood fuse block for poor pin retention.
37 Affected Products
Vehicles
| CADILLAC | ESCALADE | 2015-2019 |
| CHEVROLET | SILVERADO 1500 | 2014 |
| CHEVROLET | SUBURBAN | 2015-2019 |
| CHEVROLET | TAHOE | 2015-2019 |
| GMC | SIERRA 1500 | 2015-2019 |
| GMC | SIERRA DENALI | 2014-2019 |
| GMC | YUKON | 2015-2019 |
| GMC | YUKON XL | 2015-2019 |
SEOCONTENT-START
Bulletin No.: PIP5298B Published date: 05/28/2019
Preliminary Information
PIP5298B SES Traction Control lamp on and Engine Runs Rough with DTC P0300
Models
Brand: Model: Model Years:
VIN:
from to
Cadillac Escalade 2015 – 2019 All All 6.2 L86
All Chevrolet Silverado LD 2014 – 2019 All
All 4.3L LV3 5.3 L83 6.2 L86 All Chevrolet Suburban 2015 –
2019 All All 5.3 L83 6.2 L86 All
Chevrolet Tahoe 2015 – 2019 All All 5.3 L83 6.2 L86
All GMC Sierra Limited 2014 – 2019 All
All 4.3L LV3 5.3 L83 6.2 L86 All GMC Yukon 2015 –
2019 All All 5.3 L83 6.2 L86 All
GMC Yukon XL 2015 – 2019 All All 5.3 L83 6.2 L86
All
Supersession Statement
This PI was superseded to update Model Years. Please discard PIP5298A.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this
PI.
Condition / Concern
Some customers may comment on an SES light with DTC P0300 set and/or a rough running engine concern
Recommendations / Instructions
If SI diagnostics have been completed with no trouble found inspect for a possible terminal tension
concern on both the ignition coil power feed for a possible cause of the DTC P0300 set and/or a
rough running engine, and the X2 connector of the UBEC (Under hood Fuse
Block) for an intermittent SES Traction control lamp concern and repair as necessary.
X2 Terminal
Notice terminal “spread” NO tension
Notice Tighter tension of terminal after repair
Warranty Information
For wiring repairs covered under warranty, please refer to latest version of bulletin 10-00- 89-005
for warranty information on wire/connector repairs.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition
exhibited is resolved without completing every step, the remaining steps do not need to be
performed.
SEOCONTENT-END
Bulletin No.: PIP5298B
Published date: 05/28/2019
To View or Download this Document Click Here
NHTSA ID Number: 10151864
Manufacturer Communication Number: PIP5298A
Bulletin No.: PIP5298
Date: May-2015
To View or Download this Document Click Here
- Terminal tools work on conventional terminals as well as Pack-Con and Weather-Pack terminals found on many GM vehicles
- New blue terminal tool fits many Ford applications
- The handle slips over the probes to protect the technician's hand as well as to provide extra leverage
- item package weight: 0.76 pounds
- 【Package Include】Offers single, double pin extractors and casting tool of different sizes to fit most terminals. 82 Pieces electrical pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 24Pcs Casing Tool and 1 Protective Case
- 【Depinning Tool with Protective Case】This terminal tool removal kit set is sharp, so we provide a protective case for you. You can keep your depinning tools in it to make it more portable and prevent children from playing with them
- 【High Quality】Our pin removal tool set is made of high-quality stainless steel and plastic with high hardness. It is not easy to deform and can be used repeatedly for a long time. The pin headers are available in different specifications and are suitable for most electronic equipment maintenance, making your work more convenient
- 【Wide Application】The terminal extractor tool kit are common tools for most connector terminals, suitable for most cars, motorcycles and other electronic devices like household appliances
- 【Easy to Use】The terminal pin removal tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage. Kindly Note: Most of the wire harnesses are held in place with barb clips. You can use a tool to lift or flatten the barbs, and then gently pull out the wire ends. Pay special attention to strength and direction
- 【 Easy to Use 】Effortlessly removing terminal wires from the wire harness connector and adding a new wire. No need to pry open the terminals, just push and pull the terminal pins. Maintain the factory original harness and plug in your own electronic device without any damage.
- 【 Package Include 】12 pcs different types of car plug terminal extraction repair tools. Red handle for GM : Spring Loaded Tube*1, Square Blade*1, Flat Blade*2, Fork Blade*1, Screwdriver*1. Green handle for wire terminal: Tube*4, Flat Twin Blade*2. Includes a durable blow-molded case for easy storage, organization, and portability.
- 【Durable Metal Handles】 Unlike rubber handles that can become sticky with prolonged use, the metal handles maintain a clean, solid feel over time. Color-coded markings provide quick tool identification, while the compact design helps reduce hand fatigue during automotive electrical repairs.
- 【 Wide Application 】Designed to service a wide range of electrical connectors on most domestic and imported vehicles, as well as home appliances and electronic devices.
- 【High-Quality】 Made in Taiwan with durable metal construction, this terminal pin removal tool kit resists bending and deformation for safer, more reliable terminal removal. Built for long-lasting performance in automotive electrical and wiring repair tasks.
- 【Comprehensive Kit with 969 Pieces】: This automotive connector kit includes 969 pieces, featuring 550 pin connectors, 400 wire terminals, 18 depinning tools, and 1 tweezers. Perfect for various automotive wiring projects, ensuring you have all the necessary tools at hand to complete your tasks efficiently.
- 【28 Terminal Series with Multiple Wire Sizes】Includes terminal series covering different wire ranges from 0.2-0.75mm², 0.2-1.0mm², 0.3-1.0mm², 0.3-1.5mm² and 0.5-1.5mm². Please check the terminal size and wire range before installation to ensure proper compatibility.
- 【Wide Compatibility for Various Applications】: Suitable for cars, motorcycles, electric vehicles, and boats, this wire pin connector kit is designed to meet diverse needs. From auto wire connectors to hood pins kit for for car, the wide compatibility ensures you can tackle any electrical pin connectors project with ease.
- 【User-Friendly Design with Detailed Instructions】: The terminal pin removal tool kit comes with detailed instructions, making it easy for DIY enthusiasts and professionals alike. Whether you're using the pin terminal connectors or the wire terminal removal tool, the user-friendly design ensures a hassle-free experience.
- 【Excellent Sealing Performance】: With 28 types of female plugs and male wire connectors, this electric terminal kit provides excellent sealing performance. Perfect for gm electrical connectors and other automotive wiring connectors, the sealing ensures reliable connections in wet, dusty, or challenging environments.
This product presentation was made with AAWP plugin.