NHTSA ID Number: 10113600
Manufacturer Communication Number: PI1461
Summary
This preliminary informational bulletin provides repair information to correct a customer concern of roof panel joint finish molding (ditch molding) loose or lifted in areas.
2 Affected Products
Vehicle
| GMC | ACADIA | 2014-2015 |
Parts
| ADHESIVE, WEATHERSTRIP BLACK 5OZ TUBE ERI 2 – US | 12345097 |
| ADHESIVE, WEATHERSTRIP BLACK 5OZ TUBE ERI 2 – CA | 10953479 |
SEOCONTENT-START
Bulletin No.: PI1461
Date: Apr-2015
Subject: Roof Panel Joint Finish Molding (Ditch Molding) Loose or Lifted in Areas
Models: 2014-2015 GMC Acadia
Attention: This PI also applies to any of the above models that may be Export vehicles.
Condition/Concern
Some customers may comment that the roof panel finish molding (ditch molding) has come loose or lifted in areas.
This may be caused by wrinkles in the sealant used to secure the body panels.
Recommendation/Instructions
If you encounter a vehicle with the above concern, follow the procedure below:
Important: Be careful to not damage the molding when removing.
- With the molding removed, visually inspect for wrinkles greater than 1 mm (0.04 in) in the sealant running along the location of the molding.
- Remove the wrinkles by using a sharp blade or scraper to gently shave the wrinkles out of the sealant.
Important: When shaving the sealant, exercise great caution to not scratch the paint around the surrounding areas.
- After shaving the wrinkles, clean all surfaces of any debris.
- After removing all the debris from the location, apply a small bead of weather-strip adhesive along the whole length of the channel.
Important: Do not use excessive amounts of weather-strip adhesive. Too much could cause the adhesive to become visible after the molding is reinstalled.
Important: If there is a hole in the location of the shaved area, be sure to fill the hole with weather-strip adhesive to eliminate the chance of leaks.
Parts Information
| Part Number | Description |
| 12345097 (in Canada, use 10953479) |
ADHESIVE, WEATHERSTRIP BLACK 5OZ TUBE ERI 2 |
Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time |
| 1080298* | Remove Wrinkles in Sealant of Ditch Molding Area | 0.6 hr |
| *This is a unique Labor Operation for Bulletin use only. It will not be published in the Labor Time Guide. | ||
SEOCONTENT-END
Bulletin No.: PI1461
Date: Apr-2015
To View or Download this Document Click Here
- BONDS weatherstripping, headliners, gaskets and more
- FORMS FLEXIBLE, waterproof bond that resists vibration
- EASY TO BRUSH and spread right from the tube, saving time
- RESISTS oils, solvents, detergents and temperature changes for permanent repairs
- BONDS to a range of surfaces including vinyl, metal, fabrics and rubber
- Forms flexible, waterproof bond that resists vibration
- Easy to brush and spread right from the tube, saving time
- Resists oils, solvents, detergents and temperature changes for permanent repairs
- Bonds to a range of surfaces including vinyl, metal, fabrics and rubber
- Bonds Rubber To Metal For Weatherproof Seals – High-strength adhesive permanently attaches rubber weatherstripping and gaskets to metal surfaces, forming a flexible, waterproof seal on car doors, trunks, sunroofs and more.
- Durable All-Weather Performance – Stays strong and flexible in extreme conditions. Resists heat, cold, vibration, and exposure to oils, solvents and detergents, ensuring a long-lasting bond that won’t break down even under harsh automotive environments.
- Easy Application & Fast Cure – Squeezes out smoothly for quick, mess-free use. Easy to brush and spread right from the tube with no clamping needed. Grips in minutes as it becomes tacky, holding seals in place while curing to full strength within 24 hours.
- Versatile Automotive Use – Bonds effectively to rubber, vinyl, metal, fabric and more, making it useful for a variety of car maintenance projects. Great for reattaching loose door and trunk seals, fixing window weatherstripping or interior trim, and securing gaskets in place.
- Professional-Grade, Clean Finish – Trusted by auto professionals for decades, 3M’s black formula dries dark for less visible glue lines. It blends into black rubber seals for an OEM-like appearance, giving your repair a clean look while delivering an OEM-quality bond that keeps water, wind and noise out.
- Bonds Rubber To Metal For Weatherproof Seals – High-strength adhesive permanently attaches rubber weatherstripping and gaskets to metal surfaces, forming a flexible, waterproof seal on car doors, trunks, sunroofs and more.
- Durable All-Weather Performance – Stays strong and flexible in extreme conditions. Resists heat, cold, vibration, and exposure to oils, solvents and detergents, ensuring a long-lasting bond that won’t break down even under harsh automotive environments.
- Easy Application & Fast Cure – Squeezes out smoothly for quick, mess-free use. Easy to brush and spread right from the tube with no clamping needed. Grips in minutes as it becomes tacky, holding seals in place while curing to full strength within 24 hours.
- Versatile Automotive Use – Bonds effectively to rubber, vinyl, metal, fabric and more, making it useful for a variety of car maintenance projects. Great for reattaching loose door and trunk seals, fixing window weatherstripping or interior trim, and securing gaskets in place.
- Professional-Grade, Clean Finish – Trusted by auto professionals for decades, 3M’s black formula dries dark for less visible glue lines. It blends into black rubber seals for an OEM-like appearance, giving your repair a clean look while delivering an OEM-quality bond that keeps water, wind and noise out.
Last update on 2026-06-09 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.