Product Safety Recall N212351320 Rear Halfshaft May Fail – 2021-2022 Chevrolet Corvette

February 17, 2022 NHTSA CAMPAIGN NUMBER: 22V091000

Rear Half-Shaft Assemblies Missing Ball Bearings

An unexpected loss of drive power increases the risk of a crash.

 

NHTSA Campaign Number: 22V091

Manufacturer General MotorseBay logo, LLC

Components POWER TRAIN

Potential Number of Units Affected 22

 

Summary

General MotorseBay logo, LLC (GM) is recalling certain 2021-2022 Chevrolet Corvette vehicles. The rear half-shaft assemblies may be missing one or more ball bearings, which can result in a loss of drive power.

 

Remedy

Dealers will replace the left or right rear half-shaft assemblies, as necessary, free of charge. Owner notification letters are expected to be mailed April 4, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020. GM’s number for this recall is N212351320.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Vehicle has a Recall

 


Condition

General MotorseBay logo has decided that a defect which relates to motor vehicle safety exists in certain 2021 – 2022 model year Chevrolet Corvette vehicles. These vehicles may have rear halfshaft assemblies that are missing one or more ball bearings. If any ball bearings are missing, the halfshaft may fail, resulting in a loss of propulsion. If the vehicle unexpectedly loses propulsion, there is increased risk of a crash.

 

Correction

Dealers will replace left or right rear halfshaft assemblies.

 

Parts

QuantityPart NamePart No.
1Rear Wheel Drive Shaft85113611
1Rear Wheel Drive Shaft23435870
1Rear Wheel Drive Shaft Nut11612295eBay logo

 

Service Procedure

Replace either the left or right rear wheel drive shaft according to the chart above. Refer to either Rear Wheel Drive Shaft Replacement – Left Side or Rear Wheel Drive Shaft Replacement – Right Side in SI.

 


Frequently Asked Questions (FAQs) for Safety Recall N212351320
Rear Halfshaft May Fail

 

These questions and answers are being provided to help GM dealers respond to inquiries from involved vehicle owners about the Safety recall identified above.

 

Q1) Which vehicles are involved?

Certain 2021-2022 model year Chevrolet Corvette

 

Q2) What is the issue or condition?

These vehicles may have rear halfshaft assemblies that are missing one or more ball bearings.  If any ball bearings are missing, the halfshaft may fail, resulting in a loss of propulsion.

 

Q3) What symptoms may be experienced?  What warning signs may be associated with the issue or condition described?

None

 

Q4) What is the remedy/repair?

Dealers will replace left or right rear halfshaft assemblies.

 

Q5) What is the safety risk?  Is the vehicle safe to drive?

If the vehicle unexpectedly loses propulsion, there is increased risk of a crash.

 

Q6) Does the customer have to pay for this remedy/repair?

No, this inspection/repair will be done at no cost to the customer.

 

Q7) Is the remedy/repair available now?

Yes, please see the attached bulletin for details.

 

Q8) What should customers do until recall repairs can be completed?  Are there any special instructions?

If special instructions are provided, they will be included in the notification letters to customers.

 

Q9) How can customers check to see if their vehicle is involved in this field action?

Customers who own a vehicle involved in the field action will be notified by mail by General MotorseBay logo, but they may also check their Vehicle Identification Number (VIN) for field actions in GM Owner Center at https://my.gm.com/recalls or via NHTSA’s website at https://vinrcl.safercar.gov/vin/.

 

Q10) If customers are concerned, can they get a rental car or courtesy transportation?

Courtesy transportation is available for customers whose vehicles are involved in this recall and are within the warranty coverage period for the warranty which is associated with this recall.  Please refer to Warranty Administration Bulletin #17-NA-073:  Field Action Courtesy Transportation Policy for further information.

 


Chronology :

On September 2, 2021, a GM engineer conducted a warranty inspection of a rear halfshaft recovered from a 2021 Chevrolet Corvette that fractured and caused the vehicle to lose propulsion. Upon inspection, it was found that the halfshaft was missing two of six ball bearings. Discussions with the supplier indicated the supplier may have failed to discover the misbuild due to a potential failure in its inspection process. On October 7, 2021, a GM engineer submitted a report to GM’s Speak Up For Safety (SUFS) program.

On October 16, 2021, the supplier identified 19 VINs containing halfshafts that may have been improperly inspected. GM opened a formal investigation on November 24, 2021. A review of field data completed on January 22, 2022 revealed no additional relevant field incidents. GM is not aware of any injuries or crashes related to this condition. 18 of the 19 vehicles with suspect parts are currently in the U.S. On February 10, 2022, GM’s Safety and Field Action Decision Authority decided to conduct a safety recall for vehicles that may have received suspect rear halfshaft assemblies. On February 17, 2022, the supplier notified GM of six additional affected vehicles that were inadvertently left out of earlier communications. Four of these additional vehicles are in the US.

 


2 Affected Products

Vehicle

MAKEMODELYEAR
CHEVROLETCORVETTE2021-2022

 


17 Associated Documents

Manufacturer Notices(to Dealers,etc) – Dealer Message re N212351320 – Safety Recall Rear Halfshaft May Fail

RCMN-22V091-0915.pdf 11.4KB

 


Safety Bulletin

RCSB-22V091-3311.pdf 205.371KB

 


Defect Notice 573 Report

RCLRPT-22V091-6369.PDF 214.053KB

 


Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212351320 Rear Halfshaft May Fail

RMISC-22V091-5012.pdf 97.675KB

 


Recall 573 Report

RCLRPT-22V091-3422.PDF 214.138KB

 


Recall Acknowledgement

RCAK-22V091-2023.pdf 645.199KB

 


Safety Bulletin

RCSB-22V091-0222.pdf 205.947KB

 


Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212351320 Rear Halfshaft May Fail

RMISC-22V091-2306.pdf 97.675KB

 


Manufacturer Notices(to Dealers,etc) – Dealer Message re REVISION: N212351320-01 – Safety Recall Rear Halfshaft May Fail Revised Parts, Warranty, Service Procedure sections

RCMN-22V091-8518.pdf 52.251KB

 


Safety Bulletin

RCSB-22V091-5972.pdf 228.482KB

 


Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212351320 Rear Halfshaft May Fail

RMISC-22V091-0000.pdf 97.675KB

 


Manufacturer Notices(to Dealers,etc) – Dealer Message re GLOBAL SAFETY FIELD INVESTIGATIONS DCS6065 URGENT – DISTRIBUTE IMMEDIATELY REVISION: N212351320-02 – Safety Recall Rear Halfshaft May Fail Customer Letter Added Models: 2021-2022 Chevrolet Corvette

RCMN-22V091-9150.pdf 53.102KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V091-4889.pdf 115.413KB

 


Recall Quarterly Report #1, 2022-1

RCLQRT-22V091-3414.PDF 211.23KB

 


Recall Quarterly Report #2, 2022-2

RCLQRT-22V091-9418.PDF 211.23KB

 


Recall Quarterly Report #3, 2022-3

RCLQRT-22V091-4841.PDF 211.316KB

 


Recall Quarterly Report #4, 2022-4

RCLQRT-22V091-6264.PDF 211.422KB

 


Latest Recalls Documents

 


 

Bestseller No. 1
Bonbo 12020-2 Piece Axle Popper Kit Inner CV Axle Removal Tool Set Fit for Front Wheel Drive Vehicles, Remove Most Vehicles’ Half-Shaft Drive Axles & Fix Damaged CV Joints(2 PCS)
  • 【Easy disassembly of CV axle joint】Using the Axle Popper Forks Ball Joint Press Kit, you can quickly and easily loosen the half-axle wheeled vehicle from the front drive axle without damaging the axle's complex sliding hammer puller kit and pry bar.
  • 【Suitable for your needs】The fork-shaped end allows you to apply uniform pressure on both sides of the half shaft to ensure a safe release different from the pry bar and the sliding hammer; the two-piece CV shaft ejection tool kit ensures that it is suitable for most FWD vehicles . The solid steel front fork is designed with an open space that can be installed around your CV axle; the Popper wedges start at a depth of 1/4 inch to fit the tight space at work.
  • 【Easy to use】Insert the wedge-shaped wheel bearing tool between the transaxle housing and the shaft joint, with the fork-shaped end surrounding the shaft; tap the end of the front fork to loosen the half shaft; use shim popper to fill the larger gap on some vehicles.
  • 【Package Include】The package includes a wedge-shaped CV axle fork and a dummy gasket front fork; these CV joint puller ball joint tools are made of forged steel with a metal finish to provide maximum strength and durability.
  • 【Service Provision】We offer extended quality assurance services to ensure that each product meets consumer expectations and needs. If you encounter any quality problems during the purchase process, we will provide you with after-sales service in time to solve problems for you and protect your rights and interests.
SaleBestseller No. 2
SGT 12020 2-Piece Axle Popper Kit Inner CV Axle Removal Tool Set
  • Universal Axle Removal Tool: Super Garage Tool’s 12020 2-Piece axle popper kit is specially designed for removing inner CV axles and differential axles from most front-wheel-drive (FWD) vehicles. This essential CV axle removal tool provides a fast, efficient, and safe solution for removing stubborn, seized, or frozen axles without damaging surrounding components.
  • Wide Application: Whether you are a DIY enthusiast working in your home garage or a professional technician in a transmission shop, repair garage, tire shop, or auto body shop, this axle popper tool is designed to help you quickly, easily, and safely remove inner CV axles from front-wheel-drive vehicles. The fork-style design provides even pressure distribution, Its reliable performance makes it an essential axle removal tool for automotive repair and maintenance.
  • CV Axle Puller:The specially engineered fork design applies balanced pressure to both sides of the axle, allowing for faster and more efficient axle release. This CV shaft removal tool provides a secure and controlled solution for removing stubborn or seized axles during automotive repair, making it an essential tool for FWD axle removal and transmission maintenance.
  • Easy to Use: Simply insert the wedge-shaped axle removal tool between the transmission housing and the axle connection point, ensuring the forked end securely surrounds the axle. Strike the front fork section lightly to release the inner CV axle from the transmission. For vehicles with larger gaps, use the included shim spreader to provide a proper fit and achieve efficient axle removal. This axle popper kitsimplifies the removal process while helping prevent damage to axle seals, boots, and transmission components.
  • 12020 Axle Popper Tool Kit: The 12020 2-Piece axle popper kit includes 1 wedge fork, 1 shim fork, and 1 pair of gloves for efficient inner CV axle removal. The wedge fork features a tapered, angled design that helps create leverage for releasing stubborn axles, while the full-thickness flat shim fork is designed to fill larger gaps between the axle and transmission housing. This complete CV axle removal tool kit provides versatile solutions for safely removing FWD axles without damaging axle seals or transmission components.
Bestseller No. 3
ReluxGo Inner CV Axle Puller Removal Tool with 5/8"-18 Slide Hammer and Extension Upgraded Pole, CV Joint Removal Tool with 63mm 48mm CV Joint Fork and Outer CV Joint Adapter Steel Cable Adapter
  • ReluxGo Inner CV Axle Puller Removal Tool with 5/8"-18 Slide Hammer and Extension Upgraded Pole, CV Joint Removal Tool with 63mm 48mm CV Joint Fork and Outer CV Joint Adapter Steel Cable Adapter
  • USEFUL TOOL: This CV axle tool is very convenient and practical, threading the constant velocity joint fork removal adapter to the slide hammer, then placing the adapter around the shaft behind the inner shoe, use a slide hammer to create torque to pull the shaft out
  • USEFUL TOOL: This CV axle tool is very convenient and practical, threading the constant velocity joint fork removal adapter to the slide hammer, then placing the adapter around the shaft behind the inner shoe, use a slide hammer to create torque to pull the shaft out
  • PREMIUM MATERIAL: This drive belt replacement kit is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and stability, corrosion resistant, wear resistant, with reliable use and long service life
  • PREMIUM MATERIAL: This drive belt replacement kit is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and stability, corrosion resistant, wear resistant, with reliable use and long service life
Bestseller No. 4
Sunluway 12020 2-Piece CV Axle Removal Tool Set, Inner Axle Popper Kit
527 Reviews
Sunluway 12020 2-Piece CV Axle Removal Tool Set, Inner Axle Popper Kit
  • 【CV AXLE REMOVAL TOOL SET】 Includes a wedge fork and shim spacer designed to help separate stubborn inner CV axles from the transaxle. The 12020-style 2-piece axle removal tool provides controlled leverage for common front-wheel-drive axle service.
  • 【HIGH-IMPACT AXLE POPPER】 The fork-and-spacer design applies force around the inner CV joint to help release stuck or rusted half shafts. A practical CV axle popper for jobs where standard prying methods may be difficult.
  • 【HEAVY-DUTY STEEL CONSTRUCTION】 Drop-forged and heat-treated steel construction is built for repeated hammer impacts and demanding shop use. Designed to provide the strength needed for CV axle and half shaft removal.
  • 【CONTROLLED INNER CV AXLE REMOVAL】 Helps direct separating force around the inner joint for a straighter, more controlled removal process than improvised pry-bar methods, reducing unnecessary contact with surrounding components.
  • 【FOR FWD AXLE SERVICE】 Designed for many front-wheel-drive vehicles where sufficient clearance is available behind the inner CV joint. Check the axle configuration and available working space before purchase to confirm proper fit.
Bestseller No. 5
ReluxGo Transmission Mainshaft Inner Bearing Race Tool Installer Puller for Harley Davidson Big Twin 5 and 6 Speed 1984-present # 34902-84, Harley Bearing Removal Installation Motorcycle Tool Kit
  • If you are not 100% satisfied with your purchase, you can return the product or exchange the product for another one, be it similar or not.
  • UPGRADE DESIGN: The upgrade design of this mainshaft bearing race puller allows for easy gripping and access to inner bearing. Easily install and removal inner bearing race without damage.
  • WIDE APPLICATION: This Harley bearing puller tool is compatible with all Harley Davidson 1984 to present, five (5) and six (6) speed transmission big twins.
  • PREMIUM MATERIAL: This inner bearing race tool is made of high hardness carbon steel, heat-treated, sturdy and steady, phosphating and black coloring, wear resistant, with reliable use and long service life.
  • AFTER-SALES DESCRIPTION:If you have any questions about the purchased tool, please contact us in time, and your problems will be solved in time, we offer lifetime warranty.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...