Product Safety Recall N212351320 Rear Halfshaft May Fail – 2021-2022 Chevrolet Corvette

February 17, 2022 NHTSA CAMPAIGN NUMBER: 22V091000

Rear Half-Shaft Assemblies Missing Ball Bearings

An unexpected loss of drive power increases the risk of a crash.

 

NHTSA Campaign Number: 22V091

Manufacturer General MotorseBay logo, LLC

Components POWER TRAIN

Potential Number of Units Affected 22

 

Summary

General MotorseBay logo, LLC (GM) is recalling certain 2021-2022 ChevroleteBay logo Corvette vehicles. The rear half-shaft assemblies may be missing one or more ball bearings, which can result in a loss of drive power.

 

Remedy

Dealers will replace the left or right rear half-shaft assemblies, as necessary, free of charge. Owner notification letters are expected to be mailed April 4, 2022. Owners may contact ChevroleteBay logo customer service at 1-800-222-1020. GM’s number for this recall is N212351320.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Vehicle has a Recall

 


Condition

General MotorseBay logo has decided that a defect which relates to motor vehicle safety exists in certain 2021 โ€“ 2022 model year ChevroleteBay logo Corvette vehicles. These vehicles may have rear halfshaft assemblies that are missing one or more ball bearings. If any ball bearings are missing, the halfshaft may fail, resulting in a loss of propulsion. If the vehicle unexpectedly loses propulsion, there is increased risk of a crash.

 

Correction

Dealers will replace left or right rear halfshaft assemblies.

 

Parts

QuantityPart NamePart No.
1Rear Wheel Drive Shaft85113611
1Rear Wheel Drive Shaft23435870
1Rear Wheel Drive Shaft Nut11612295eBay logo

 

Service Procedure

Replace either the left or right rear wheel drive shaft according to the chart above. Refer to either Rear Wheel Drive Shaft Replacement – Left Side or Rear Wheel Drive Shaft Replacement – Right Side in SI.

 


Frequently Asked Questions (FAQs) for Safety Recall N212351320
Rear Halfshaft May Fail

 

These questions and answers are being provided to help GM dealers respond to inquiries from involved vehicle owners about the Safety recall identified above.

 

Q1) Which vehicles are involved?

Certain 2021-2022 model year ChevroleteBay logo Corvette

 

Q2) What is the issue or condition?

These vehicles may have rear halfshaft assemblies that are missing one or more ball bearings.  If any ball bearings are missing, the halfshaft may fail, resulting in a loss of propulsion.

 

Q3) What symptoms may be experienced?  What warning signs may be associated with the issue or condition described?

None

 

Q4) What is the remedy/repair?

Dealers will replace left or right rear halfshaft assemblies.

 

Q5) What is the safety risk?  Is the vehicle safe to drive?

If the vehicle unexpectedly loses propulsion, there is increased risk of a crash.

 

Q6) Does the customer have to pay for this remedy/repair?

No, this inspection/repair will be done at no cost to the customer.

 

Q7) Is the remedy/repair available now?

Yes, please see the attached bulletin for details.

 

Q8) What should customers do until recall repairs can be completed?  Are there any special instructions?

If special instructions are provided, they will be included in the notification letters to customers.

 

Q9) How can customers check to see if their vehicle is involved in this field action?

Customers who own a vehicle involved in the field action will be notified by mail by General MotorseBay logo, but they may also check their Vehicle Identification Number (VIN) for field actions in GM Owner Center at https://my.gm.com/recalls or via NHTSAโ€™s website at https://vinrcl.safercar.gov/vin/.

 

Q10) If customers are concerned, can they get a rental car or courtesy transportation?

Courtesy transportation is available for customers whose vehicles are involved in this recall and are within the warranty coverage period for the warranty which is associated with this recall.  Please refer to Warranty Administration Bulletin #17-NA-073:  Field Action Courtesy Transportation Policy for further information.

 


Chronology :

On September 2, 2021, a GM engineer conducted a warranty inspection of a rear halfshaft recovered from a 2021 ChevroleteBay logo Corvette that fractured and caused the vehicle to lose propulsion. Upon inspection, it was found that the halfshaft was missing two of six ball bearings. Discussions with the supplier indicated the supplier may have failed to discover the misbuild due to a potential failure in its inspection process. On October 7, 2021, a GM engineer submitted a report to GMโ€™s Speak Up For Safety (SUFS) program.

On October 16, 2021, the supplier identified 19 VINs containing halfshafts that may have been improperly inspected. GM opened a formal investigation on November 24, 2021. A review of field data completed on January 22, 2022 revealed no additional relevant field incidents. GM is not aware of any injuries or crashes related to this condition. 18 of the 19 vehicles with suspect parts are currently in the U.S. On February 10, 2022, GMโ€™s Safety and Field Action Decision Authority decided to conduct a safety recall for vehicles that may have received suspect rear halfshaft assemblies. On February 17, 2022, the supplier notified GM of six additional affected vehicles that were inadvertently left out of earlier communications. Four of these additional vehicles are in the US.

 


2 Affected Products

Vehicle

MAKEMODELYEAR
CHEVROLETeBay logoCORVETTE2021-2022

 


17 Associated Documents

Manufacturer Notices(to Dealers,etc) – Dealer Message re N212351320 – Safety Recall Rear Halfshaft May Fail

RCMN-22V091-0915.pdf 11.4KB

 


Safety Bulletin

RCSB-22V091-3311.pdf 205.371KB

 


Defect Notice 573 Report

RCLRPT-22V091-6369.PDF 214.053KB

 


Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212351320 Rear Halfshaft May Fail

RMISC-22V091-5012.pdf 97.675KB

 


Recall 573 Report

RCLRPT-22V091-3422.PDF 214.138KB

 


Recall Acknowledgement

RCAK-22V091-2023.pdf 645.199KB

 


Safety Bulletin

RCSB-22V091-0222.pdf 205.947KB

 


Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212351320 Rear Halfshaft May Fail

RMISC-22V091-2306.pdf 97.675KB

 


Manufacturer Notices(to Dealers,etc) – Dealer Message re REVISION: N212351320-01 โ€“ Safety Recall Rear Halfshaft May Fail Revised Parts, Warranty, Service Procedure sections

RCMN-22V091-8518.pdf 52.251KB

 


Safety Bulletin

RCSB-22V091-5972.pdf 228.482KB

 


Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212351320 Rear Halfshaft May Fail

RMISC-22V091-0000.pdf 97.675KB

 


Manufacturer Notices(to Dealers,etc) – Dealer Message re GLOBAL SAFETY FIELD INVESTIGATIONS DCS6065 URGENT – DISTRIBUTE IMMEDIATELY REVISION: N212351320-02 โ€“ Safety Recall Rear Halfshaft May Fail Customer Letter Added Models: 2021-2022 ChevroleteBay logo Corvette

RCMN-22V091-9150.pdf 53.102KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V091-4889.pdf 115.413KB

 


Recall Quarterly Report #1, 2022-1

RCLQRT-22V091-3414.PDF 211.23KB

 


Recall Quarterly Report #2, 2022-2

RCLQRT-22V091-9418.PDF 211.23KB

 


Recall Quarterly Report #3, 2022-3

RCLQRT-22V091-4841.PDF 211.316KB

 


Recall Quarterly Report #4, 2022-4

RCLQRT-22V091-6264.PDF 211.422KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V091&docType=RCL

 


 

Bestseller No. 1
Bonbo 12020-2 Piece Axle Popper Kit Inner CV Axle Removal Tool Set Fit for Front Wheel Drive Vehicles, Remove Most Vehiclesโ€™ Half-Shaft Drive Axles & Fix Damaged CV Joints(2 PCS)
418 Reviews
Bonbo 12020-2 Piece Axle Popper Kit Inner CV Axle Removal Tool Set Fit for Front Wheel Drive Vehicles, Remove Most Vehiclesโ€™ Half-Shaft Drive Axles & Fix Damaged CV Joints(2 PCS)
  • ใ€Easy disassembly of CV axle jointใ€‘Using the Axle Popper Forks Ball Joint Press Kit, you can quickly and easily loosen the half-axle wheeled vehicle from the front drive axle without damaging the axle's complex sliding hammer puller kit and pry bar.
  • ใ€Suitable for your needsใ€‘The fork-shaped end allows you to apply uniform pressure on both sides of the half shaft to ensure a safe release different from the pry bar and the sliding hammer; the two-piece CV shaft ejection tool kit ensures that it is suitable for most FWD vehicles . The solid steel front fork is designed with an open space that can be installed around your CV axle; the Popper wedges start at a depth of 1/4 inch to fit the tight space at work.
  • ใ€Easy to useใ€‘Insert the wedge-shaped wheel bearing tool between the transaxle housing and the shaft joint, with the fork-shaped end surrounding the shaft; tap the end of the front fork to loosen the half shaft; use shim popper to fill the larger gap on some vehicles.
  • ใ€Package Includeใ€‘The package includes a wedge-shaped CV axle fork and a dummy gasket front fork; these CV joint puller ball joint tools are made of forged steel with a metal finish to provide maximum strength and durability.
  • ใ€Service Provisionใ€‘We offer extended quality assurance services to ensure that each product meets consumer expectations and needs. If you encounter any quality problems during the purchase process, we will provide you with after-sales service in time to solve problems for you and protect your rights and interests.
Bestseller No. 2
Sunluway 12020 2-Piece CV Axle Removal Tool Set, Inner Axle Popper Kit, Heavy Duty CV Axle Puller for FWD Vehicles, Half Shaft Remover
516 Reviews
Sunluway 12020 2-Piece CV Axle Removal Tool Set, Inner Axle Popper Kit, Heavy Duty CV Axle Puller for FWD Vehicles, Half Shaft Remover
  • ใ€PROFESSIONAL CV AXLE REMOVAL TOOLใ€‘ The Sunluway 12020 is the ultimate cv axle removal tool designed for automotive garage maintenance. This heavy-duty axle removal tool set comes with a specialized wedge fork and shim spacer, providing the exact mechanical leverage needed to break free stubborn half-shafts instantly.
  • ใ€HIGH-IMPACT CV AXLE POPPERใ€‘ Engineered to function as a highly efficient cv axle popper, this tool applies dual-sided, perfectly balanced force to the inner joint. It pops frozen or rusted drive axles out of the transmission casing seamlessly, making it a mandatory specialty tool for DIY mechanics.
  • ใ€HEAVY DUTY CV AXLE REMOVAL TOOL KITใ€‘ Drop-forged from premium, heat-treated hardened steel, this master cv axle removal tool kit is built to endure relentless shop hammer blows. The rugged steel structure guarantees this cv axle tool won't bend or snap under extreme torque or high-impact stress.
  • ใ€DAMAGE-FREE TRANSAXLE DISASSEMBLYใ€‘ A much safer alternative to standard pry bars or slide hammers. This specialized inner cv axle removal tool wraps securely around the shaft housing, operating as a smooth removal tool that pulls axles out straight to prevent costly scratches to aluminum casings or tearing delicate oil seals.
  • ใ€UNIVERSAL FIT FOR FWD VEHICLESใ€‘ Universally compatible with the cv axle and axle shaft of most front-wheel drive (FWD) and all-wheel drive (AWD) cars and SUVs. We back our tools with lifetime-focused customer support to ensure your suspension and transaxle repairs are successful every time.
Bestseller No. 3
JNXIJ 48mm Inner CV Axle Removal Tool with Nut, CV Joint Fork Removing Tool Fits 5/8"-18 Threads Slide Hammers, Steel Front Wheel Drive Axle Pulley Attachment for Most Vehicles
  • Main Function: This CV joint removal adapter distributes force evenly during removal, effectively avoiding damage to the axle caused by uneven force and protecting your vehicle structure. At the same time, it significantly improves removal efficiency, making maintenance work more effortless
  • Excellent Material: This U-shaped CV axle removal tool is made of high-strength steel, featuring excellent impact resistance, and is not prone to deformation or breakage. In addition, it has great corrosion resistance and can maintain stable performance in complex environments
  • Easy to Operate: First, install the inner CV half-shaft puller adapter onto the slide hammer (not included in the package). Then, align and secure the adapter joint onto the inner shaft end of the CV half-shaft, ensuring a secure fit. Finally, pull the slide hammer to remove the half-shaft
  • Product Specification: We offer two sizes of CV joint fork adapter. The first one has an opening size of 1.9" (48 mm) and a depth of 2.5" (64 mm); the second one has an opening size of 2.5" (65 mm) and a depth of 3.3" (85 mm). Each tool has a hole diameter of 0.5" at the end, with a 5/8"-18 threaded nut
  • Scope of Application: This CV shaft puller removal tool for cars is compatible with sliding hammers with 5/8 inch -18 threads. It is designed for a wide range of front-wheel drive applications, including UTVs and specific models like the Taurus and Sable from 1986 to present in FWD configurations
Bestseller No. 4
Inner CV Axle Removal Tool Set & Front Wheel Drive Axle Puller for Use on Front Wheel Drive Vehicles,Front Wheel Drive Fork Joint Shaft,CV Axle Puller-Remove Most Vehiclesโ€™ Half-Shaft Drive Axles
  • Scope of use: suitable for disassembling the half axle drive shaft of most vehicles. Use this CV shaft tool kit to easily disassemble the CV shaft without damaging your vehicle, saving your time and energy!
  • Easy to operate: the CV joint pulling tool can be connected to any slide hammer with 5 / 8 "- 18 threads and allows you to generate additional torque to loosen and remove the stubborn shaft and water pump. Connect the internal CV removal tool to the slide hammer, slide the adapter around the shaft behind the internal shield, and use the slide hammer to generate torque to pull out the shaft.
  • High quality material: made of high-quality hardened steel after heat treatment, which can ensure the best strength and durability, as well as rust prevention and corrosion prevention. Very suitable for professional maintenance personnel.
  • Advantages: the internal CV shaft removal tool is better and safer than using a hammer and rod. The two-piece CV shaft Popper tool kit ensures that it is suitable for most FWD vehicles. The front wheel drive shaft puller is different from the crowbar or CV shaft fork tool,The CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
Bestseller No. 5
JNXIJ 63mm Inner CV Axle Removal Tool with Nut, CV Joint Fork Removing Tool Fits 5/8"-18 Threads Slide Hammers, Steel Front Wheel Drive Axle Pulley Attachment for Most Vehicles
  • Main Function: This CV joint removal adapter distributes force evenly during removal, effectively avoiding damage to the axle caused by uneven force and protecting your vehicle structure. At the same time, it significantly improves removal efficiency, making maintenance work more effortless
  • Excellent Material: This U-shaped CV axle removal tool is made of high-strength steel, featuring excellent impact resistance, and is not prone to deformation or breakage. In addition, it has great corrosion resistance and can maintain stable performance in complex environments
  • Easy to Operate: First, install the inner CV half-shaft puller adapter onto the slide hammer (not included in the package). Then, align and secure the adapter joint onto the inner shaft end of the CV half-shaft, ensuring a secure fit. Finally, pull the slide hammer to remove the half-shaft
  • Product Specification: We offer two sizes of CV joint fork adapter. The first one has an opening size of 1.9" (48 mm) and a depth of 2.5" (64 mm); the second one has an opening size of 2.5" (65 mm) and a depth of 3.3" (85 mm). Each tool has a hole diameter of 0.5" at the end, with a 5/8"-18 threaded nut
  • Scope of Application: This CV shaft puller removal tool for cars is compatible with sliding hammers with 5/8 inch -18 threads. It is designed for a wide range of front-wheel drive applications, including UTVs and specific models like the Taurus and Sable from 1986 to present in FWD configurations

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...