September 29, 2021 NHTSA CAMPAIGN NUMBER: 21V758000
Brake Pressure Modulator Valve May Short
Water in the BPMV may cause an electrical short circuit and increase the risk of fire.
NHTSA Campaign Number: 21V758
Manufacturer General Motors
, LLC
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 3,241
Summary
General Motors
, LLC (GM) is recalling certain 2021-2022 Chevrolet
Silverado 2500, Silverado 3500, GMC Sierra 2500, and Sierra 3500 vehicles with electronic brake control modules (EBCM) replaced during vehicle assembly. The bolts that attach the brake pressure modulator valve (BPMV) assembly may not be properly tightened, which could fail to seal the two sub-assemblies and allow water intrusion.
Remedy
Owners are advised to park outside and away from other structures until the recall repair is completed. Dealers will replace the BPMV assembly, free of charge. Owner notification letters were mailed on October 20, 2021. Owners may contact Chevrolet
customer service at 1-800-222-1020 or GMC customer service at 1-800-462-8782. GM’s number for this recall is N212349181.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Vehicle has a Recall
Condition
General Motors
has decided that a defect which relates to motor vehicle safety exists in certain 2021 – 2022 model year Chevrolet
Silverado 2500/3500 and GMC Sierra 2500/3500 vehicles. Bolts that attach the brake pressure modulator valve (BPMV) assembly in these vehicles may not have been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an underhood fire.
Correction
Dealers will replace the brake pressure modulator valve (BPMV) assembly.
Parts
| Quantity | Part Name | Part No. |
| 1 | Electronic Brake Control Module and Brake Pressure Modulator Valve kit | 85107552 |
| 2 | Brake Fluid (US) | 19299570
ACDelco 798696 GM Original Equipment 10-4086 DOT 4 Hydraulic Brake and Clutch Fluid - 16 oz
Last update on 2026-06-09 / Affiliate links / Images from Amazon Product Advertising API |
| Brake Fluid (CA) | 19299571 |
Frequently Asked Questions (FAQs) for Safety Recall N212349181
Underhood Fire
These questions and answers are being provided to help GM dealers respond to inquiries from involved vehicle owners about the Safety recall identified above.
Q1) Which vehicles are involved?
Certain 2021 and 2022 model year Chevrolet
Silverado 2500/3500 and GMC Sierra 2500/3500 vehicles
Q2) What is the issue or condition?
Bolts that attach the brake pressure modulator valve (BPMV) assembly in these vehicles may not have been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an underhood fire.
Q3) What symptoms may be experienced? What warning signs may be associated with the issue or condition described?
The driver may see a check engine light or the vehicle may be placed into a reduced power mode.
Q4) What is the remedy/repair?
Dealers will replace the brake pressure modulator valve (BPMV) assembly.
Q5) What is the safety risk? Is the vehicle safe to drive?
Water intrusion into the BPMV assembly may cause an electrical short circuit that can lead to an underhood fire.
Q6) Does the customer have to pay for this remedy/repair?
No, this inspection/repair will be done at no cost to the customer.
Q7) Is the remedy/repair available now?
Yes, please see the attached bulletin for details.
Q8) What should customers do until recall repairs can be completed? Are there any special instructions?
It is recommended that the vehicle be parked outside and not in a garage or other structure until it is repaired.
Q9) How can customers check to see if their vehicle is involved in this field action?
Customers who own a vehicle involved in the field action will be notified by mail by General Motors
, but they may also check their Vehicle Identification Number (VIN) for field actions in GM Owner Center at https://my.gm.com/recalls or via NHTSA’s website at https://vinrcl.safercar.gov/vin/.
Q10) If customers are concerned, can they get a rental car or courtesy transportation?
Courtesy transportation is available for customers whose vehicles are involved in this recall and are within the warranty coverage period for the warranty which is associated with this recall. Please refer to Warranty Administration Bulletin #17-NA-073: Field Action Courtesy Transportation Policy for further information.
Chronology :
On September 9, 2021, a GM fire technical expert submitted an issue to GM’s Speak Up For Safety Program after becoming aware of an underhood fire involving a 2021 GMC Sierra 2500 vehicle at GM’s Flint Assembly plant the day before. GM opened an investigation on September 10, 2021. A second 2021 GMC Sierra 2500 vehicle experienced an underhood fire at the Flint Assembly Plant on September 13, 2021. Both vehicles had been parked outside awaiting shipment and both had been exposed to heavy rainfall the day before each fire. X-ray and CT scans on both vehicles showed a gap between the bolt head and brake pressure modulator valve (BPMV), indicating the assembly had not been properly sealed to prevent water intrusion. Both vehicles had been subject to temporary production process changes that involved offline replacement of the electronic brake control module (EBCM), which is a sub-assembly of the BPMV. Post-fire analysis of the vehicles also concluded the fire propagated from this area.
GM issued a stop-delivery order to GM dealers covering potentially impacted 2021 model year vehicles on September 14, 2021. In addition, dealers were instructed to disconnect the negative battery cable from the battery. Potentially affected vehicles still at the Flint Assembly plant were also held with the negative battery cable disconnected. 451 vehicles on hold at the Flint Assembly were examined for gaps at the BPMV bolt. 62 vehicles were found to have this gap condition, of which at least one vehicle was confirmed to have water within the EBCM assembly. On September 22, 2021, GM’s Safety Field Action Decision Authority (SFADA) decided to conduct a safety recall.
8 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| CHEVROLET | SILVERADO 2500 | 2021-2022 |
| CHEVROLET | SILVERADO 3500 | 2021-2022 |
| GMC | SIERRA 2500 | 2021-2022 |
| GMC | SIERRA 3500 | 2021-2022 |
22 Associated Documents
Safety Bulletin re Product Safety Recall N212349181 Underhood Fire
Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212349181 Underhood Fire
RMISC-21V758-2522.pdf 99.919KB
Manufacturer Notices(to Dealers,etc) – Updated FAQs for Stop Delivery Order for Upcoming Safety Recall N212349181 Underhood Fire
Manufacturer Notices(to Dealers,etc) – Dealer Message re N212349181 – Safety Recall Underhood Fire
Safety Bulletin – Product Safety Recall A212335470 Mispositioned Emergency Jack May Not Support Vehicle
RCSB-21V758-4511.pdf 458.645KB
Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall A212335470-02 Mispositioned Emergency Jack May Not Support Vehicle
RMISC-21V758-6376.pdf 102.326KB
Recall Quarterly Report #1, 2021-4
RCLQRT-21V758-5153.PDF 211.146KB
Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212349181 Underhood Fire
RMISC-21V758-4732.pdf 99.206KB
Safety Bulletin re Product Safety Recall N212349181 Underhood Fire
RCSB-21V758-3042.pdf 183.816KB
Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212349181 Underhood Fire
RMISC-21V758-8972.pdf 99.206KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V758-6212.pdf 79.096KB
Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N212349181 Underhood Fire
RMISC-21V758-6044.pdf 99.936KB
Manufacturer Notices(to Dealers,etc) – Dealer Message re Update for Stop Delivery Order for Upcoming Safety Recall N212349181 Underhood Fire
Manufacturer Notices(to Dealers,etc) – Dealer Message re N212349181 – Safety Recall Underhood Fire Application for Used Vehicle Working Capital Assistance Program (WCAP)
RCMN-21V758-9933.pdf 107.446KB
Defect Notice 573 Report
RCLRPT-21V758-9446.PDF 214.74KB
Recall Acknowledgement
Manufacturer Notices(to Dealers,etc) – Dealer Message re A212335470-02 – Safety Mispositioned Emergency Jack May Not Support Vehicle
Manufacturer Notices(to Dealers,etc) – Dealer Message re N212349181 01 Safety Recall Recall Reinstated Underhood Fire
Miscellaneous Document – Supplemental Outreach re Underhood Fire
RMISC-21V758-1548.pdf 282.697KB
Recall 573 Report
RCLRPT-21V758-9160.PDF 214.799KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V758-7535.PDF 211.244KB
Recall Quarterly Report #3, 2022-2
RCLQRT-21V758-0445.PDF 211.327KB
Latest Recalls Documents
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by monitoring current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- 【4 SYSTEMS DIAGNOSTICS OBD2 SCANNER】- More than a standard check engine code reader, this OBD2 scanner diagnostic tool covers Engine, Transmission, SRS (Airbag), and ABS (Anti-lock Brakes) – detecting 90%+ vehicle faults that basic obd scanners miss. It’s a professional car diagnostic scanner designed for both DIYers and small repair shops, saving you trips to expensive mechanics.
- 【3 ESSENTIAL RESET FUNCTIONS FOR HOME MAINTENANCE】-Built-in Oil Reset, EPB Reset, and Battery Match – this car scanner diagnostic tool lets you complete maintenance tasks at home: clear oil change reminders, reset electronic parking brakes after pad replacement, and calibrate new batteries. Skip 50−100$ dealer fees with a scanner for car that turns complex jobs into 5-minute tasks.
- 【COMPATIBILITY WITH 1996+ CARS & SMALL TURCKS】-As a Code reader for cars and small trucks, it supports 9 OBDII protocols (SAE J1850 PWM/SAE J1850 VPW/IS09 141-2/IS0 14230-4 KWP/IS0 15765-4 CAN ETC.) – compatible with most of 1996+ gasoline vehicles and small trucks. Auto VIN automatically identifies your vehicle, making it the easiest vehicle code reader for beginners to use right out of the box.
- 【14 BASIC DIAGNOSTIC FEATURES FOR ALL SCENARIOS】-This car code reader includes Read/Clear DTCs, Live Data Graphs, I/M Readiness Status, Freeze Frame Data, Battery Test, and Oxygen Sensor Monitoring – everything you need for smog test prep, used car inspections, and daily fault checks. It's not just an engine code reader,also a complete diagnostic scanner for all vehicles.
- 【LIFETIME WIFI UPDATES FOR ONGOING COMPATIBILITY】-Unlike outdated odb2 scanners that require paid subscriptions, this OBD2 scanner offers lifetime WiFi updates – get the latest DTC library (100000+ codes) and new vehicle coverage quarterly. No computer needed: connect to WiFi directly, and your car reader diagnostic stays compatible with new models for years.
- [Diagnose Like a Pro] BlueDriver Pro Next-Gen is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission, and more on supported vehicles, including expanded coverage on newer model years.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Expanded Make & Model Coverage] Optimized for today’s vehicles with strong support for GM, Ford
, Stellantis (RAM, Jeep, Chrysler), Toyota
, Honda, Nissan
, Mazda, Subaru
, Hyundai, Mercedes-Benz, BMW, and VW. Enhanced communication on select 2024+ Nissan
and Mazda models (see compatibility chart). - [Gas Vehicles 1996+ & Select Light-Duty Trucks] Works with all gas-powered vehicles made in 1996 or newer, plus select light-duty trucks and diesels, including F-250, RAM 2500, Silverado, and Sierra. Built for daily drivers, family vehicles, and real-world truck use.
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
Last update on 2026-06-11 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Find a Dealer Any Chevrolet
, Buick
, GMC or Cadillac
dealer can make the Underhood Fire Safety Recall repair for FREE. Need Help? 1-866-467-9700 mycertifiedservice.com/locate-a-dealer Safety Risk Water may become trapped in the brake pressure modulator valve (BPMV) which could result in a short circuit and lead to an underhood fire. Call Your Dealer The Recall Repair Is FREE Your GM dealer will replace the brake pressure modulator valve (BPMV) assembly for FREE. URGENT Underhood Fire Safety Recall FREE Important Dear [FName], Our records, which are based primarily on state registration and title data, indicate that you are the registered owner of a [Model Year1] [MAKE1] [MODEL1], which is affected by the Underhood Fire Safety Recall. Our records indicate that your vehicle has not been repaired for this recall. General Motors
has decided that a defect, which relates to motor vehicle safety, exists in certain 2021–2022 model year Chevrolet
Silverado 2500/3500 and GMC Sierra 2500/3500 vehicles. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and strive for your continued satisfaction with our products. It is important to contact your dealer to schedule your FREE recall repair appointment. Why is your vehicle being recalled? Bolts that attach the brake pressure modulator valve (BPMV) assembly in these vehicles may not have been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an underhood fire. What will we do? Your GM dealer will replace the brake pressure modulator valve (BPMV) assembly. This service will be performed for you at no charge. Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual service correction time of approximately 2 ½ hours. What should you do? Contact your GM dealer to schedule your FREE recall repair as soon as possible. It is recommended that the vehicle be parked outside and not in a garage or other structure until your recall repair is complete. Questions? If you have questions or concerns that your dealer is unable to resolve, please call 1-866-467-9700. Sincerely, Regina Carto Vice President, Global Product Safety & Systems This notice applies to your [Model Year1] [MAKE1] [MODEL1] VIN: [VIN1] Recall #212349181 [DEALER_NAME] [DEALER_NAME] [DEALER_ADDRESS1] [DEALER_ADDRESS1] [DEALER_CITY], [DEALER_STATE_PROV], [DEALER_POSTAL_CODE] [DEALER_SERVICE_PHONE] ©2022 General Motors
. All Rights Reserved. [Date] [Unique_ID] [Creative_Code] V Buscar un concesionario Cualquier concesionario Chevrolet
, Buick
, GMC o Cadillac
puede realizar la reparación de la Llamada a revisión de seguridad por incendio debajo del cofre de manera GRATUITA. ¿Necesita ayuda? 1-866-467-9700 mycertifiedservice.com/locate-a-dealer Riesgo de seguridad Si entra agua, puede quedar atrapada en la válvula moduladora de presión de freno (BPMV), lo cual podría ocasionar un cortocircuito y esto a su vez podría provocar un incendio debajo del cofre. Llame a su concesionario La reparación de la llamada a revisión es GRATUITA Su concesionario GM reemplazará el ensamble de la válvula moduladora de presión de freno (BPMV) de manera GRATUITA. URGENT Llamada a revisión de seguridad por incendio debajo del cofre FREE Importante Estimado [FName], Según nuestros archivos, basados principalmente en datos de matrículas y títulos estatales, usted es el propietario registrado de un [Model Year1] [MAKE1] [MODEL1], el cual está incluido en la Llamada a revisión de seguridad por incendio debajo del cofre. Nuestros registros indican que su vehículo no ha sido reparado en respuesta a esta llamada a revisión. General Motors
ha determinado que existe un defecto que se relaciona con la seguridad de los vehículos de motor, en ciertos vehículos Chevrolet
Silverado 2500/3500 y GMC Sierra 2500/3500 año de modelo 2021– 2022. En consecuencia, GM está realizando una llamada a revisión de seguridad. Le rogamos disculpe este inconveniente. Sin embargo, nos preocupa su seguridad y nos esforzamos por garantizar su satisfacción constante con nuestros productos. Por ello es importante que se ponga en contacto con su concesionario para programar su cita de reparación de la llamada a revisión GRATUITA. ¿Por qué se está llamando a revisión a su vehículo? Los pernos que sujetan el ensamble de la válvula moduladora de presión de freno (BPMV) en estos vehículos posiblemente no hayan sido apretados de manera adecuada, razón por la que no se crea el sello entre dos subensambles cuya finalidad es evitar la entrada de agua. Si entra agua y se queda atrapada en la BPMV, podría ocasionar un cortocircuito que a su vez podría provocar un incendio debajo del cofre. ¿Qué haremos nosotros? Su concesionario GM reemplazará el ensamble de la válvula moduladora de presión de freno (BPMV). Este servicio se realizará para usted sin cargo. Por cuestiones de programación del servicio, es probable que el concesionario necesite tener el vehículo un tiempo más prolongado que el tiempo real del servicio de corrección, que es de aproximadamente 2 ½ horas. ¿Qué debe hacer usted? Póngase en contacto con su concesionario GM para programar su reparación de la llamada a revisión GRATUITA lo antes posible. Se recomienda estacionar el vehículo en el exterior y no dentro de un garaje u otra estructura hasta que se realice su reparación de la llamada a revisión. ¿Dudas? Si tiene preguntas o dudas que no pueda resolver su concesionario, por favor llame al 1-866-467-9700. Atentamente, Regina Carto Vicepresidente, Seguridad del Producto y Sistemas Global Este aviso aplica para su [Model Year1] [MAKE1] [MODEL1] VIN: [VIN1] Llamada a revisión #212349181 [DEALER_NAME] [DEALER_NAME] [DEALER_ADDRESS1] [DEALER_ADDRESS1] [DEALER_CITY], [DEALER_STATE_PROV], [DEALER_POSTAL_CODE] [DEALER_SERVICE_PHONE] ©2022 General Motors
. Todos los derechos reservados. [Date] [Unique_ID] [Creative_Code] V Important Underhood Fire Safety Recall Notice Aviso importante sobre Llamada a revisión de seguridad por incendio debajo del cofre GM Vehicle Safety PO Box 3047 Milwaukee, WI 53201 PRESORTED FIRST-CLASS MAIL U.S. POSTAGE PAID GENERAL MOTORS
HDPU1-22 ***************AUTO**MIXED AADC 450 99999999999999 [Unique_ID] [Creative_Code] CV-011676 [FName] [LName] [Business_Name] [Address] [Address2] [City], [State] [Zip] FPO
**************************************************************************************************************
Product Safety Recall N212349181 Underhood Fire Copyright 2021 General Motors
. All Rights Reserved. Page 1 of 4 Release Date: October 2021 Revision: 01 Revision Description: This bulletin has been revised to add a warning statement to the service procedure and additional instructions before replacing the EBCM/BPMV. Please discard all copies of bulletin N212349181. Attention: It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. 2021 model year vehicles involved in this recall were placed on stop delivery September 14, 2021, and 2022 model year vehicles on September 23, 2021 under N212349180. These VINs have been closed and moved to N212349181. Once the service procedure contained in this bulletin has been performed on the vehicle, the vehicle is released from stop delivery and the vehicle can be delivered to the customer. All involved vehicles that are in dealer inventory must be held and not delivered to customers, dealer traded, or used for demonstration purposes until the repair contained in this bulletin has been performed on the vehicle. Make Model Model Year From To RPO Description Chevrolet
Silverado 2500/3500 2021 2022 GMC Sierra 2500/3500 Involved vehicles are marked “open” on the Investigate Vehicle History screen in GM Global Warranty Management system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections and/or repairs. Condition General Motors
has decided that a defect which relates to motor vehicle safety exists in certain 2021 – 2022 model year Chevrolet
Silverado 2500/3500 and GMC Sierra 2500/3500 vehicles. Bolts that attach the brake pressure modulator valve (BPMV) assembly in these vehicles may not have been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an underhood fire. Correction Dealers will replace the brake pressure modulator valve (BPMV) assembly. Parts Quantity Part Name Part No. 1 Electronic Brake Control Module and Brake Pressure Modulator Valve kit 85107552 2 Brake Fluid 19299570(US) 19299571(CA) Obtain locally in compliance w/GM Material Specification GMW3356 same as 9986356 (all other countries) Important: Due to limited initial parts availability, dealers are encouraged not to order these parts for use as shelf stock. Parts required to complete this recall are to be obtained from General Motors
Customer Care and Aftersales (GMCCA). Order parts on a CSO, any orders placed as a DRO may cancel. Parts may also have quantity limiters in effect. Reminder: Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts to confirm RIM managed status. Parts may have quantity limiters in effect. Product Safety Recall N212349181 Underhood Fire Page 2 of 4 Warranty Information Labor Operation Description Labor Time Trans. Type Net Item 9105998 Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement – Includes Brake Bleeding 2.4 ZFAT N/A 9105999 Floor Plan Reimbursement – NEW INVENTORY ONLY N/A ZFAT * 9106003 Working Capital Assistance Program Reimbursement – USED INVENTORY ONLY N/A ZFAT ** Note: To avoid having to “H” route the floor plan/WCAP transaction for approval, it must be submitted prior to the repair transaction. Floor Plan Reimbursement – NEW INVENTORY ONLY * USA & Canada Only – For vehicles eligible for floor plan reimbursement, the amount should be submitted in Net Item/Miscellaneous. This amount should represent the product of the vehicle’s average daily interest rate (see table below) multiplied by the actual number of days the vehicle was in dealer inventory and not available for sale. This reimbursement is limited to the number of days from the date of the stop delivery message (September 14, 2021, September 23, 2021 and update September 29, 2021) to the date the repair is completed, and the vehicle is ready for sale (not to exceed 34 days): Vehicle Floor Plan Reimbursement Amount USA Canada 2021 Chevrolet
Silverado 2500/3500 $6.88 $10.37 2022 Chevrolet
Silverado 2500/3500 $6.56 $10.52 2021 GMC Sierra 2500/3500 $8.12 $11.43 2022 GMC Sierra 2500/3500 $8.01 N/A Working Capital Assistance Program (WCAP) Reimbursement – USED INVENTORY ONLY Note: USA & Canada Only – To avoid having to “H” route the WCAP transaction for approval, it must be submitted prior to the repair transaction. Important: The WCAP ZSET transaction labor code, 9800080, provided in the dealer message sent on September 30, 2021 (USA and Canada), must have been submitted prior to the submittal of the ZFAT transaction labor code or the claim will reject. ** USA & Canada Dealers Only – For vehicles eligible under the Working Capital Assistance Program, the amount should be submitted in Net Item/Miscellaneous. This amount has been calculated to a daily value for the days that the vehicle was in used dealer inventory and not available for sale. This reimbursement is limited to the number of days from the date of the stop sale/stop delivery order (September 14, 2021, September 23, 2021 and update September 29, 2021) to the date the repair closed the recall bulletin. (not to exceed 34 days). Vehicle Working Capital Assistance Reimbursement Amount USA Canada 2021 Chevrolet Silverado 2500/3500 $30.07 $43.17 2021 GMC Sierra 2500/3500 $29.40 $42.98 Service Procedure Warning: The brake system will be under pressure initially when performing this repair. Be sure to use safety glasses when cracking the lines open and follow all appropriate safety guidelines. Replace the Electronic Brake Control Module (EBCM) and Brake Pressure Modulator Valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement in SI. • Before replacing the EBCM/BPMV, lightly apply the brake pedal using a suitable tool to prevent the brake fluid reservoir from draining during the repair. Dealer Responsibility – For USA & Export (USA States, Territories, and Possessions) It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. Product Safety Recall N212349181 Underhood Fire Page 3 of 4 The US National Traffic and Motor Vehicle Safety Act provides that each vehicle that is subject to a recall of this type must be adequately repaired within a reasonable time after the customer has tendered it for repair. A failure to repair within sixty days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. If the condition is not adequately repaired within a reasonable time, the customer may be entitled to an identical or reasonably equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation. To avoid having to provide these burdensome remedies, every effort must be made to promptly schedule an appointment with each customer and to repair their vehicle as soon as possible. In the recall notification letters, customers are told how to contact the US National Highway Traffic Safety Administration if the recall is not completed within a reasonable time. Dealer Responsibility – All All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers’ possession and subject to this recall must be held and inspected/repaired per the service procedure of this bulletin before customers take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealer-traded, released to auction, used for demonstration, or any other purpose. All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System (CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified for sale within the CPOIS system, or once again be used in the CTP program. Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward. Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this bulletin. A copy of the customer letter is provided in this bulletin for your use in contacting customers. Recall follow-up cards should not be used for this purpose, since the customer may not as yet have received the notification letter. In summary, whenever a vehicle subject to this field action enters your vehicle inventory you must take the steps necessary to ensure the program correction has been made before selling the vehicle. In addition, for vehicles entering your facility for service, you are required to ensure the customer is aware of the open field action and make every reasonable effort to implement the program correction as set forth in this bulletin prior to releasing the vehicle. Dealer Reports For dealers with involved vehicles, a listing has been prepared and will be available through GM GlobalConnect Maxis Field Action Reports or sent directly to export dealers. The Inventory tab of the dealer reports will contain VINs that apply to this recall. This information is intended to assist dealers with the PROMPT COMPLETION of these vehicles. The Customer In-Service tab will contain customer names and addresses from Motor Vehicle Registration Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete this recall may be a violation of law in several states. Courtesy Transportation – For USA & Canada Courtesy transportation is available for customers whose vehicles are involved in a product program and still within the warranty coverage period. See General Motors Service Policies and Procedures Manual for courtesy transportation program details. Customer Notification USA & Canada – General Motors will notify customers of this recall on their vehicle (see copy of customer letter included with this bulletin). Export – Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor Vehicle Safety Act. GM bulletins are intended for use by professional technicians, NOT a “do-it-yourselfer”. They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your vehicle may benefit from the information. We Support Voluntary Technician Certification Product Safety Recall N212349181 Underhood Fire Page 4 of 4 IMPORTANT SAFETY RECALL October 2021 This notice applies to your vehicle, VIN: _____________________________________ Dear General Motors Customer: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2021-2022 model year Chevrolet Silverado 2500/3500 and GMC Sierra 2500/3500 vehicles. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products. I M P O R T A N T • Your vehicle is involved in GM safety recall N212349181. • Schedule an appointment with your GM dealer. • This service will be performed for you at no charge. Why is your vehicle being recalled? Bolts that attach the brake pressure modulator valve (BPMV) assembly in these vehicles may not have been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an underhood fire. What will we do? Your GM dealer will replace the brake pressure modulator valve (BPMV) assembly. This service will be performed for you at no charge. Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual service correction time of approximately 2 ½ hours. What should you do? It is recommended that the vehicle be parked outside and not in a garage or other structure until it is repaired. You should contact your GM dealer to arrange a service appointment as soon as possible. Do you have questions? If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below. Division Number Text Telephones (TTY) Chevrolet 1-800-630-2438 1-800-833-2438 GMC 1-866-996-9463 1-800-462-8583 Puerto Rico – English 1-800-496-9992 Puerto Rico – Español 1-800-496-9993 Virgin Islands 1-800-496-9994 If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 21V758. Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. Regina A. Carto Vice President Global Product Safety and Systems GM Recall: N212349181
**************************************************************************************************************
IMPORTANT SAFETY RECALL October 2021 This notice applies to your vehicle, VIN: _____________________________________ Dear General Motors Customer: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2021-2022 model year Chevrolet Silverado 2500/3500 and GMC Sierra 2500/3500 vehicles. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products. IMPORTANT • Your vehicle is involved in GM safety recall N212349181. • Schedule an appointment with your GM dealer. • This service will be performed for you at no charge. Why is your vehicle being recalled? Bolts that attach the brake pressure modulator valve (BPMV) assembly in these vehicles may not have been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an underhood fire. What will we do? Your GM dealer will replace the brake pressure modulator valve (BPMV) assembly. This service will be performed for you at no charge. Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual service correction time of approximately 2 ½ hours. What should you do? It is recommended that the vehicle be parked outside and not in a garage or other structure until it is repaired. You should contact your GM dealer to arrange a service appointment as soon as possible. Do you have questions? If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below. Division Number Text Telephones (TTY) Chevrolet 1-800-630-2438 1-800-833-2438 GMC 1-866-996-9463 1-800-462-8583 Puerto Rico – English 1-800-496-9992 Puerto Rico – Español 1-800-496-9993 Virgin Islands 1-800-496-9994 If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 21V758. Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. Regina A. Carto Vice President Global Product Safety and Systems GM Recall: N212349181
**************************************************************************************************************
GM CUSTOMER CARE AND AFTERSALES DCS5947 URGENT – DISTRIBUTE IMMEDIATELY Date: September 30, 2021 Subject: N212349181 – Safety Recall Underhood Fire Application for Used Vehicle Working Capital Assistance Program (WCAP) Models: 2021-2022 Chevrolet Silverado 2500/3500 and GMC Sierra 2500/3500 To: All General Motors Dealers On September 29, 2021, GM sent to all GM dealers GlobalConnect Message GCUS-3-2326 regarding safety recall N212349181. The required repair to complete this recall is not yet available. Until further instructions are received, the involved vehicles that are in dealers’ possession (new or used vehicle inventory, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc.) must be held and cannot be delivered to customers, dealer-traded, released to auction, used for demonstration purposes or put to any other use. This message is to inform dealers who have involved vehicles in their inventory that they can now apply for the used vehicle Working Capital Assistance Program (“WCAP”) for safety recall N212349181. Before proceeding with the application process described below, dealers must verify vehicle eligibility based on the program terms and guidelines that were provided in GM GlobalConnect Message GCUS-9-10968 dated March 10, 2021. Applications submitted on ineligible vehicles are subject to chargeback of any incentives paid to the dealer under the WCAP. Because compensation and tracking requires visibility into dealers’ inventory, dealers must also have agreed to a Dealer Data Share agreement with GM in order to receive any compensation under this program. To apply for the WCAP for safety recall N212349181, dealers must access the GM Global Warranty Management (GWM) system and submit a “ZSET” warranty transaction using the labor code provided below for each eligible vehicle. This zero dollar special transaction type is the dealer’s application for compensation and constitutes a representation from the dealer that the vehicle is eligible for WCAP assistance. Note: Acceptance of the warranty transaction does not ensure vehicle eligibility or guarantee the provision of any assistance as defined by program terms and guidelines. Labor Code Description Labor Time Trans Code 9800080 Working Capital Assistance for Safety Recall N212349181 N/A ZSET To be eligible for the WCAP, a vehicle must be in dealer inventory at the time the related field action bulletin is released. If a vehicle has been delivered, wholesaled or otherwise disposed of prior to release of the bulletin, the vehicle is not eligible for assistance. Additionally, recalled vehicles taken in on trade may be eligible for assistance if the dealer immediately reports the vehicle in used vehicle inventory via its Dealer Management System (DMS) and makes application through the GWM system. To ensure that GM is receiving daily inventory information, which is necessary to process payments and make eligibility determinations under the WCAP, the dealer’s vehicles must be properly identified in the dealership’s DMS. A daily feed of this information is provided to GM through the Dealer Data Share (DDS) agreement. Beginning with the 1st quarter of 2019, all WCAP payments will be facilitated through the Global Warranty Management (GWM) system. For each eligible vehicle, a qualifying dealer will submit for WCAP vehicle enrollment with a “ZSET” transaction type and for reimbursement with a “ZFAT” transaction type both through the GWM system. If approved, a WCAP credit for that vehicle will be issued through the GWM system similar to any other warranty credit. WCAP submission instructions and the required labor code will also be provided in the appropriate field action bulletin. Each WCAP transaction being credited will be clearly identified on the dealer’s daily credit memo. In order to receive payment, a dealer must have timely reported the vehicle in used vehicle inventory, retained the vehicle until the related field action bulletin is released, and properly applied for the WCAP payment. The vehicle must also be otherwise eligible under WCAP rules and guidelines. GM reserves the right to amend, modify, terminate, or cancel this program at any time in its sole discretion. END OF MESSAGE GM CUSTOMER CARE AND AFTERSALES
**************************************************************************************************************
GLOBAL SAFETY FIELD INVESTIGATIONS DCS5952 URGENT – DISTRIBUTE IMMEDIATELY Date: October 4, 2021 Subject: Updated FAQs for Stop Delivery Order for Upcoming Safety Recall N212349181 Underhood Fire Models: 2021-2022 Chevrolet Silverado 2500/3500 2021-2022 GMC Sierra 2500/3500 To: All General Motors Dealers STOP DELIVERY ORDER UPDATE On September 29, 2021, GM sent to all dealers GlobalConnect Message GCUS-3-2326 advising that General Motors had notified the National Highway Traffic Safety Administration (NHTSA) about an upcoming safety recall that involves certain 2021-2022 model year Chevrolet Silverado 2500/3500 and Sierra 2500/3500 vehicles. We also advised that the stop delivery is continued, and the population expanded to include certain customer vehicles. Question #8 in the FAQs have been updated and are attached to this message. It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification until the defect is remedied. Bolts that attach the brake pressure modulator valve (BPMV) assembly in these vehicles may not have been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an underhood fire. To correct this condition, dealers will replace the brake pressure modulator valve (BPMV) assembly. Until further instructions are received, involved vehicles that are in dealers’ possession (new or used vehicle inventory, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc.) must be held and not delivered to customers, dealer-traded, released to auction, used for demonstration purposes or any other dealer use. All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System (CPOIS) will be de-certified. A list of involved vehicles that have been identified as being in dealer new vehicle inventory is attached to this message. It is sorted by dealer Business Associate Code (BAC) for easy reference. Your dealership’s BAC will not be listed if none of the involved vehicles are currently in your new vehicle inventory. To identify involved vehicles in dealer used inventory, run an Open VIN Report or Field Action Initiation Report using Field Action Reports-GFAM within the Maxis Dealer Application in GlobalConnect. If you did not perform the below procedure when the stop delivery was initially ordered, please perform it at this time for vehicles that are in your inventory using the below labor code. Submittal of this will NOT close it out of IVH. Service Procedure IMPORTANT: Disconnect the negative battery cable from the battery and, if equipped, disconnect the negative battery from the auxiliary battery. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) or Battery Negative Cable Disconnection and Connection (Dual Battery) in Service Information. Do NOT connect the negative battery cable and drive the vehicle until you receive the final remedy and lift stop sale message. Warranty Information Labor Operation Description Labor Time Trans. Type Net Item 9106002 Disconnect Negative Battery Cable 0.2 ZFAT N/A Until the recall bulletin is released, the Investigate Vehicle History (IVH) screen in the Global Warranty Management (GWM) system will display “N/A” under Release Date and “Incomplete – Remedy not yet available” under Status. This means the required repair is not yet available and dealers should not attempt to perform any repairs. We are working with the supplier to obtain the required parts as quickly as possible. When sufficient quantity of parts are available, the recall bulletin will be released and dealers can begin repairing vehicles. END OF MESSAGE GLOBAL SAFETY FIELD INVESTIGATIONS
**************************************************************************************************************
GLOBAL SAFETY FIELD INVESTIGATIONS DCS5945 URGENT – DISTRIBUTE IMMEDIATELY Date: September 29, 2021 Subject: Update for Stop Delivery Order for Upcoming Safety Recall N212349181 Underhood Fire Models: 2021-2022 Chevrolet Silverado 2500/3500 2021-2022 GMC Sierra 2500/3500 To: All General Motors Dealers STOP DELIVERY ORDER UPDATE On September 23, 2021, GM sent to all dealers GlobalConnect Message GCUS-3-2321 with an update, adding 4 additional VINs to the original stop sale which was issued on September 14, 2021. Effective immediately, the stop delivery is continued. The population has also been expanded to include certain customer vehicles. VINs that were in N212349180 have been moved to N212349181. General Motors has notified the National Highway Traffic Safety Administration (NHTSA) about an upcoming safety recall that involve certain 2021-2022 model year Chevrolet Silverado 2500/3500 and Sierra 2500/3500 vehicles. The GM recall number is N212349181. It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification until the defect is remedied. Bolts that attach the brake pressure modulator valve (BPMV) assembly in these vehicles may not have been properly tightened, failing to create the seal between two sub-assemblies that is intended to prevent water intrusion. If water becomes trapped in the BPMV, it could result in a short circuit, which could lead to an underhood fire. To correct this condition, dealers will replace the brake pressure modulator valve (BPMV) assembly. Until further instructions are received, involved vehicles that are in dealers’ possession (new or used vehicle inventory, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc.) must be held and not delivered to customers, dealer-traded, released to auction, used for demonstration purposes or any other dealer use. All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System (CPOIS) will be de-certified. The Investigate Vehicle History (IVH) screen in the Global Warranty Management (GWM) system will be updated for this upcoming recall on September 29, 2021. This action has been taken to assist dealers with determining which vehicles are involved so they can properly respond to customer inquiries. A list of involved vehicles that have been identified as being in dealer new vehicle inventory is attached to this message. It is sorted by dealer Business Associate Code (BAC) for easy reference. Your dealership’s BAC will not be listed if none of the involved vehicles are currently in your new vehicle inventory. To identify involved vehicles in dealer used inventory, run an Open VIN Report or Field Action Initiation Report using Field Action Reports-GFAM within the Maxis Dealer Application in GlobalConnect. If you did not perform the below procedure when the stop delivery was initially ordered, please perform it at this time for vehicles that are in your inventory using the below labor code. Submittal of this will NOT close it out of IVH. Service Procedure IMPORTANT: Disconnect the negative battery cable from the battery and, if equipped, disconnect the negative battery from the auxiliary battery. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) or Battery Negative Cable Disconnection and Connection (Dual Battery) in Service Information. Do NOT connect the negative battery cable and drive the vehicle until you receive the final remedy and lift stop sale message. Warranty Information Labor Operation Description Labor Time Trans. Type Net Item 9106002 Disconnect Negative Battery Cable 0.2 ZFAT N/A Question and Answer Document (Q&A) Attached to this message you will find a document that addresses the ten most likely questions customers may have regarding this Safety Recall. Please use this information as an aid to confidently answer customer concerns. Until the recall bulletin is released, the Investigate Vehicle History (IVH) screen in the Global Warranty Management (GWM) system will display “N/A” under Release Date and “Incomplete – Remedy not yet available” under Status. This means the required repair is not yet available and dealers should not attempt to perform any repairs. We are working with the supplier to obtain the required parts as quickly as possible. When sufficient quantity of parts are available, the recall bulletin will be released and dealers can begin repairing vehicles. END OF MESSAGE GLOBAL SAFETY FIELD INVESTIGATIONS
**************************************************************************************************************
GLOBAL SAFETY FIELD INVESTIGATIONS DCS5961 URGENT – DISTRIBUTE IMMEDIATELY Date: October 13, 2021 Subject: N212349181 – Safety Recall Underhood Fire Models: 2021-2022 Chevrolet Silverado 2500/3500 2021-2022 GMC Sierra 2500/3500 To: All General Motors Dealers General Motors is releasing Safety Recall N212349181 today. The total number of U.S. vehicles involved is approximately 3,267. Please see the attached bulletin for details. Vehicles involved in this recall were placed on stop delivery September 14, 2021. Once the service procedure contained in the bulletin has been performed on the vehicle, the vehicle is released from stop delivery and the vehicle can be delivered to the customer. Question and Answer Document (Q&A) Attached to this message you will find a document that addresses the ten most likely questions customers may have regarding this Safety Recall. Please use this information as an aid to confidently answer customer concerns. Working Capital Assistance Program (WCAP) Eligibility Vehicles which were in dealer inventory at the time of this bulletin release were eligible for WCA. Please refer to the attached bulletin and GlobalConnect Message GCUS-9-9188 for additional information. Customer Letter Mailing The customer letter mailing will begin on October 20, 2021. Global Warranty Management (GWM) The Required Field Action section on the Investigate Vehicle History (IVH) screen will be updated October 13, 2021. A list of involved vehicles in dealer new inventory is attached to this message. Please hold all warranty transactions until IVH has been updated. END OF MESSAGE GLOBAL SAFETY FIELD INVESTIGATIONS
**************************************************************************************************************
GLOBAL SAFETY FIELD INVESTIGATIONS DCS5977 URGENT – DISTRIBUTE IMMEDIATELY Date: October 27, 2021 Subject: A212335470-02 – Safety Mispositioned Emergency Jack May Not Support Vehicle Models: 2020 – 2022 Buick Encore GX 2021 – 2022 Chevrolet Trailblazer To: All General Motors Dealers General Motors is releasing a revision to Safety Recall Program A212335470 today. The total number of U.S. vehicles involved is approximately 135,400. Please see the attached bulletin for details. Customer Letter Mailing The customer letter mailing will begin on November 12, 2021. Global Warranty Management (GWM) The Required Field Action section on the Investigate Vehicle History (IVH) screen will be updated October 27, 2021. Please verify a VIN’s involvement in this field action by checking in IVH prior to doing any repairs. Please hold all warranty transactions until IVH has been updated. END OF MESSAGE GLOBAL SAFETY FIELD INVESTIGATIONS
**************************************************************************************************************
GM CUSTOMER CARE AND AFTERSALES DCS5972 URGENT – DISTRIBUTE IMMEDIATELY Date: October 22, 2021 Subject: N212349181 01 – Safety Recall – Recall Reinstated Underhood Fire Models: 2021-2022 Chevrolet Silverado 2500/3500 2021-2022 GMC Sierra 2500/3500 To: All General Motors Dealers On October 21, 2021, we temporarily suspended Safety Recall N212349181 via GM GlobalConnect Message GCUS-3-2347. We are pleased to announce that this has been reinstated and dealers can resume repairing vehicles. This bulletin has also been revised to add a warning statement to the service procedure and additional instructions before replacing the EBCM/BPMV. Please discard all copies of bulletin N212349181. Involved vehicle status in IVH will be changed back to an Open status on October 22, 2021. We apologize for any inconvenience this situation may have caused. GM CUSTOMER CARE AND AFTERSALES
SEOCONTENT-END
This product presentation was made with AAWP plugin.







