| “This site contains affiliate links for which OEMDTC may be compensated” |
May 7, 2020 NHTSA CAMPAIGN NUMBER: 20V254000
Loss of Electric Power Steering Assist
A greater steering effort would be needed to control the vehicle if power steering is lost, increasing the risk of a crash.
NHTSA Campaign Number: 20V254
Manufacturer General Motors
LLC
Components STEERING
Potential Number of Units Affected 1,826
Summary
General Motors LLC (GM) is recalling certain 2015-2016 Chevrolet Caprice Police Pursuit vehicles (PPV) and SS vehicles. Corrosion of the connector between the electric power steering module and the torque sensor connector may cause a loss of electric power steering assist.
Remedy
GM will notify owners, and dealers will replace the steering gear assembly, free of charge. The recall began May 26, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020. GM’s number for this recall is N192285350.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
Parts
| Quantity | Part Name | Part No. |
| 1 | Electric Belt Drive Rack and Pinion Steering Gear | 92289255 |
| 2 | Steering Gear Inner Boot Clamp | 22913281 |
| 4 | Steering Gear Bolts | 11611833  |
| 2 | Steering Gear Tie Rod to Knuckle Nut | 11609282 |
| 1 | Front Lower Control Arm Front Bolt | 92139183 |
| 1 | Front Lower Control Arm Front Nut | 11609283 |
| 1 | Intermediate Shaft to Steering Gear Bolt | 11609752 |
| 2 | Intermediate Shaft to Steering Column Bolt (shows as sway bar nut in EPC) | 11588431 |
|
|
SEOCONTENT-START
Product Safety Recall
N192285350 Loss of Power Steering Assist
Copyright 2020 General Motors. All Rights Reserved. Page 1 of 5
Release Date:
September 2020
Revision:
02
Revision Description:
This bulletin is being revised to update the customer reimbursement language. Please discard all previous copies of N192285350.
Attention:
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
Make
Model
Model Year
RPO
Description
From
To
Chevrolet
Caprice PPV
2015
2016
Chevrolet
SS
Involved vehicles are marked “open” on the Investigate Vehicle History screen in GM Global Warranty Management system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections and/or repairs.
Condition
General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2015-2016 model year Chevrolet SS and Caprice PPV vehicles. These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor. If power steering assist is lost (i.e., the vehicle reverts to manual steer), a malfunction indicator light displays on the instrument panel and a chime sounds to inform the driver. If power steering is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash.
Correction
Dealers will replace the steering gear assembly with a new assembly fitted with gold-plated terminals.
Parts
Quantity
Part Name
Part No.
1
Electric Belt Drive Rack and Pinion Steering Gear
92289255
2
Steering Gear Inner Boot Clamp
22913281
4
Steering Gear Bolts
11611833
2
Steering Gear Tie Rod to Knuckle Nut
11609282
1
Front Lower Control Arm Front Bolt
92139183
1
Front Lower Control Arm Front Nut
11609283
1
Intermediate Shaft to Steering Gear Bolt
11609752
2
Intermediate Shaft to Steering Column Bolt (shows as sway bar nut in EPC)
11588431
Reminder: Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts to confirm RIM managed status. Parts may have quantity limiters in effect.
Due to the small number of vehicles involved and due to limited initial parts availability, dealers are encouraged not to order recall parts for use as shelf stock.
Warranty Information
Labor Operation
Description
Labor Time
Trans. Type
Net Item
9105116
Steering Gear Replacement (Includes power steering control module programming and front end alignment)
2.8
ZFAT
N/A
9105117
Customer Reimbursement Approved
ZFAT
*
– For USA and Canada dealers only
N/A
– For Export dealers only
0.2
9105118
Customer Reimbursement Denied – For USA dealers only
N/A
ZFAT
**
Note: To avoid having to “H” route the customer reimbursement transaction for approval, it must be submitted prior to the repair transaction.
*For USA and Canada: Submit the dollar amount reimbursed to the customer in Net/Reimbursement. Submit $20.00 administrative allowance in Net/Admin Allowance.
For Export: Submit the dollar amount reimbursed to the customer in Net/Reimbursement.
**Submit $10.00 administrative allowance in Net/Admin Allowance.
Product Safety Recall
N192285350 Loss of Power Steering Assist
Page 2 of 5
Service Procedure
Replace the Electric Belt Drive Rack and Pinion Steering Gear. Refer to Electric Belt Drive Rack and Pinion Steering Gear Replacement in SI.
Dealer Responsibility – For USA & Export (USA States, Territories, and Possessions)
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
The US National Traffic and Motor Vehicle Safety Act provides that each vehicle that is subject to a recall of this type must be adequately repaired within a reasonable time after the customer has tendered it for repair. A failure to repair within sixty days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. If the condition is not adequately repaired within a reasonable time, the customer may be entitled to an identical or reasonably equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation. To avoid having to provide these burdensome remedies, every effort must be made to promptly schedule an appointment with each customer and to repair their vehicle as soon as possible. In the recall notification letters, customers are told how to contact the US National Highway Traffic Safety Administration if the recall is not completed within a reasonable time.
Dealer Responsibility – All
All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers’ possession and subject to this recall must be held and inspected/repaired per the service procedure of this bulletin before customers take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealer-traded, released to auction, used for demonstration, or any other purpose.
All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System (CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified for sale within the CPOIS system, or once again be used in the CTP program.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this bulletin. A copy of the customer letter is provided in this bulletin for your use in contacting customers. Recall follow-up cards should not be used for this purpose, since the customer may not as yet have received the notification letter. In summary, whenever a vehicle subject to this field action enters your vehicle inventory you must take the steps necessary to ensure the program correction has been made before selling the vehicle. In addition, for vehicles entering your facility for service, you are required to ensure the customer is aware of the open field action and make every reasonable effort to implement the program correction as set forth in this bulletin prior to releasing the vehicle.
Dealer Reports
For dealers with involved vehicles, a listing with involved vehicles has been prepared and will be provided to U.S. and Canadian dealers through the GM GlobalConnect Recall Reports or sent directly to export dealers. The listing may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete this recall is a violation of law in several states/provinces/countries. Accordingly, you are urged to limit the use of this report to the follow-up necessary to complete this recall.
Courtesy Transportation – For USA & Canada
Courtesy transportation is available for customers whose vehicles are involved in a product program and still within the warranty coverage period. See General Motors Service Policies and Procedures Manual for courtesy transportation program details.
Product Safety Recall
N192285350 Loss of Power Steering Assist
Page 3 of 5
Customer Notification
USA & Canada – General Motors will notify customers of this recall on their vehicle. (see copy of customer letter included with this bulletin).
Export – Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached sample letter.
Customer Reimbursement
See General Motors Service Policies and Procedures Manual, Product Field Action Customer Reimbursement Procedure (USA & Canada) or local Policies and Procedures, for details.
GM bulletins are intended for use by professional technicians, NOT a “do-it-yourselfer”. They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your vehicle may benefit from the information.
We Support Voluntary Technician Certification
Product Safety Recall
N192285350 Loss of Power Steering Assist
Page 4 of 5
IMPORTANT SAFETY RECALL
October 2020
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2015 – 2016 model year Chevrolet Caprice PPV and Chevrolet SS vehicles. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
IMPORTANT
• Your vehicle is involved in GM safety recall N192285350.
• Schedule an appointment with your GM dealer.
• This service will be performed for you at no charge.
Why is your vehicle being recalled?
These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor. If power steering assist is lost (i.e., the vehicle reverts to manual steer), a malfunction indicator light displays on the instrument panel and a chime sounds to inform the driver. If power steering is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash.
What will we do?
Your GM dealer will replace the steering gear assembly with a new assembly fitted with gold-plated terminals. This service will be performed for you at no charge. Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual service correction time of approximately 3 hours.
What should you do?
You should contact your GM dealer to arrange a service appointment as soon as possible.
Did you already pay for this repair?
Even though you may have previously had repairs for this condition, you will still need to take your vehicle to your dealer for additional repairs. If you have already paid for repairs for the recall condition, please complete the enclosed reimbursement form and present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if this is not convenient, you may mail the completed reimbursement form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170.
Do you have questions?
If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below.
Division
Number
Text Telephones (TTY)
Chevrolet
1-800-630-2438
1-800-833-2438
Puerto Rico – English
1-800-496-9992
Puerto Rico – Español
1-800-496-9993
Virgin Islands
1-800-496-9994
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free
Product Safety Recall
N192285350 Loss of Power Steering Assist
Page 5 of 5
Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 20V254.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Maryann L. Combs
Vice President
Global Vehicle Safety
Enclosure
GM Recall: N192285350
*******************************************
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5388
URGENT – DISTRIBUTE IMMEDIATELY
Date: May 7, 2020
Subject: N192285350 – Safety Recall
Loss of Power Steering Assist
Models: 2015 – 2016 Chevrolet Caprice PPV
2015 – 2016 Chevrolet SS
To: All General Motors Dealers
General Motors is releasing Safety Recall N192285350 today. The total number of U.S. vehicles involved is approximately 1826. Please see the attached bulletin for details.
Question and Answer Document (Q&A)
Attached to this message you will find a document that addresses the ten most likely questions customers may have regarding this Safety Recall. Please use this information as an aid to confidently answer customer concerns.
Global Warranty Management (GWM)
The Required Field Action section on the Investigate Vehicle History (IVH) screen will be updated May 8, 2020 or sooner. Please hold all warranty transactions until IVH has been updated.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
*************************************************
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5403
URGENT – DISTRIBUTE IMMEDIATELY
Date: May 21, 2020
Subject: N192285350-01 – Safety Recall
Loss of Power Steering Assist
Customer Letter Added
Models: 2015 – 2016 Chevrolet Caprice PPV
2015 – 2016 Chevrolet SS
To: All General Motors Dealers
Bulletin N192285350-01 has been revised to include a copy of the customer notification letter. Please discard all copies of bulletin N192285350.
Customer Letter Mailing
The customer letter mailing will begin on May 26, 2020.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
***********************************************************************************
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5518
URGENT – DISTRIBUTE IMMEDIATELY
Date: September 23, 2020
Subject: N192285350-02 – Safety Recall
Loss of Power Steering Assist
Expanded Population
Models: 2015 – 2016 Chevrolet Caprice PPV
2015 – 2016 Chevrolet SS
To: All General Motors Dealers
GM has expanded the population of vehicles subject to Safety Recall N192285350. This expanded population is reflected in the revised bulletin N192285350-02. We have also updated the Customer Reimbursement language. Please use the attached revised bulletin N192285350-02 going forward and discard all previous copies of bulletin N192285350.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
SEOCONTENT-END
Frequently Asked Questions (FAQs) for Safety Recall N192285350
Loss of Power Steering Assist
These questions and answers are being provided to help GM dealers respond to inquiries from involved vehicle owners about the Safety recall identified above.
| Q1) | Which vehicles are involved? |
| A1) | 2015 – 2016 Chevrolet Caprice PPV and 2015 – 2016 Chevrolet SS
|
| Q2) | What is the issue or condition? |
| A2) | General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2015-2016 model year Chevrolet SS and Caprice PPV vehicles. These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor.
|
| Q3) | What symptoms may be experienced? What warning signs may be associated with the issue or condition described? |
| A3) | If power steering assist is lost (i.e., the vehicle reverts to manual steer), a malfunction indicator light displays on the instrument panel and a chime sounds to inform the driver.
|
| Q4) | What is the remedy/repair? |
| A4) | Dealers will replace the steering gear assembly with a new assembly fitted with goldplated terminals.
|
| Q5) | What is the safety risk? Is the vehicle safe to drive? |
| A5) | If power steering is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash.
|
| Q6) | Does the customer have to pay for this remedy/repair? |
| A6) | No, this inspection/repair will be done at no cost to the customer.
|
| Q7) | Is the remedy/repair available now? |
| A7) | Yes, the remedy/repair is available now, please see the attached bulletin for details.
|
| Q8) | What should customers do until recall repairs can be completed? Are there any special instructions? |
| A8) | If special instructions are provided, they will be included in the notification letters to customers.
|
| Q9) | How can customers check to see if their vehicle is involved in this field action? |
| A9) | Customers who own a vehicle involved in the field action will be notified by mail by General Motors, but they may also check their Vehicle Identification Number (VIN) for field actions in GM Owner Center at https://my.gm.com/recalls or via NHTSA’s website at https://vinrcl.safercar.gov/vin/.
|
| Q10) | If customers are concerned, can they get a rental car or courtesy transportation? |
| A10) | Courtesy transportation is available for customers whose vehicles are involved in this recall and are within the warranty coverage period for the warranty which is associated with this recall. Please refer to Warranty Administration Bulletin #17-NA-073: Field Action Courtesy Transportation Policy for further information.
|
IMPORTANT SAFETY RECALL
May 2020
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2015 – 2016 model year Chevrolet Caprice PPV and Chevrolet SS vehicles. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
I M P O R T A N T
- Your vehicle is involved in GM safety recall N192285350.
- Schedule an appointment with your GM dealer.
- This service will be performed for you at no charge.
| Why is your vehicle being recalled? | These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor. If power steering assist is lost (i.e., the vehicle reverts to manual steer), a malfunction indicator light displays on the instrument panel and a chime sounds to inform the driver. If power steering is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash. |
| What will we do? | Your GM dealer will replace the steering gear assembly with a new assembly fitted with gold-plated terminals. This service will be performed for you at no charge. Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual service correction time of approximately 3 hours. |
| What should you do? | You should contact your GM dealer to arrange a service appointment as soon as possible. |
| Did you already pay for this repair? | Even though you may have previously had repairs for this condition, you will still need to take your vehicle to your dealer for additional repairs. If you have already paid for repairs for the recall condition, please complete the enclosed reimbursement form and present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if this is not convenient, you may mail the completed reimbursement form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and required documents must be presented to your dealer or received by the Reimbursement Department by May 31, 2021, unless state law specifies a longer reimbursement period. |
| Do you have questions? | If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below. |
| Division | Number | Text Telephones (TTY) |
| Chevrolet | 1-800-630-2438 | 1-800-833-2438 |
| Puerto Rico – English | 1-800-496-9992 | |
| Puerto Rico – Español | 1-800-496-9993 | |
| Virgin Islands | 1-800-496-9994 |
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 20V254.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Maryann L. Combs
Vice President
Global Vehicle Safety
Enclosure
GM Recall: N192285350
4 Affected Products
Vehicles
17 Associated Documents
ISSUED Owner Notification Letter(Part 577) – Power Steering
RCONL-20V254-1690.pdf 78.219KB
Loading...
Reload document 
Open in new tab
ISSUED Owner Notification Letter(Part 577)
RCONL-20V254-8297.pdf 101.826KB
Loading...
Recall 573 Report
RCLRPT-20V254-8813.PDF 215.866KB
Loading...
Miscellaneous Document – Frequently Asked Questions (FAQs) for Safety Recall N192285350 Loss of Power Steering Assist
RMISC-20V254-9868.pdf 85.269KB
Loading...
Safety Bulletin
RCSB-20V254-5378.pdf 112.688KB
Loading...
Recall Acknowledgement
RCAK-20V254-3444.pdf 244.265KB
Loading...
Defect Notice 573 Report
RCLRPT-20V254-8746.PDF 215.866KB
Loading...
Recall Quarterly Report #1, 2020-2
RCLQRT-20V254-6736.PDF 211.139KB
Loading...
Manufacturer Notices(to Dealers,etc) – Memo to Dealers re Memo to Dealers re Safety Recall Loss of Power Steering Assist Customer Letter Added
Loading...
Safety Bulletin
RCSB-20V254-7446.pdf 134.736KB
Loading...
Manufacturer Notices(to Dealers,etc) – Dealer Notification re N192285350 – Safety Recall Loss of Power Steering Assist
Loading...
Recall Quarterly Report #3, 2020-4
RCLQRT-20V254-3476.PDF 211.331KB
Loading...
Recall 573 Report
RCLRPT-20V254-4979.PDF 215.997KB
Loading...
Recall Quarterly Report #2, 2020-3
RCLQRT-20V254-3182.PDF 211.243KB
Loading...
Owner Notification Letter(Part 577)
RCONL-20V254-1435.pdf 78.171KB
Loading...
Safety Bulletin – Media Release re This bulletin is being revised to update the customer reimbursement language. Please discard all previous copies of N192285350
RCSB-20V254-3370.pdf 134.147KB
Loading...
Manufacturer Notices(to Dealers,etc) – Dealer Notification re Expansion of Vehicle Population
Loading...
Latest Recalls Documents
| “This site contains affiliate links for which OEMDTC may be compensated” |
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on, quickly read and clear diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble codes in seconds. If you want to find out the cause of the check engine light, this device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. This is not the case with the AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Check compatibility with your vehicle model before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- [Vehicle CEL Doctor] The NT301 obd2 scanner enables you to read DTCs, access to I/M readiness status, figure out the root reason of check engine light or MIL turned on, monitor sensors test, read live data and retrieve VIN of your vehicle. The fault code only can be cleared after repair finished by NT301, as like all the obd2 code readers' working principle
- [Accuracy & Streams] Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.
- [Worthy to Own] Recommended by most professional mechanics on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen and 1-year seller assurance with EXCLUSIVE tech and service team. Plug & Play, no need to update before using. Available to windows system. NOT support ios and Mac
- [S-mog Check Helper] Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident e-missions test
- [Home Necessity] Open to global customers. No battery required, NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and great choice for Home and Autoshop Mechanics. This scanner for car only supports to read the fault code of engine system, not support ABS or SRS
- WIDE COMPATIBILITY – Trusted by YouTube Star Scotty Kilmer. The AD410 OBD2 Scanner supports all 16PIN vehicles that comply with the OBDII protocol, including KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN. This OBD2 code scanner compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles. Multilingual support (English, German, French, Spanish, etc.), this car code reader is ideal for international users. Check compatibility with your vehicle model before purchasing. !!! Powered directly from your vehicle's OBDII connector, this diagnostic tool doesn' t need a battery or charger.
- CRITICAL FUNCTIONALITY – Quickly Read & Clear Fault Codes. The AD410 obd2 scanner diagnostic tool quickly reads and clears stored emissions-related codes, pending codes, and provides code definitions. With over 42,000 built-in DTC lookups, you can easily identify faults without the need for Google searches. Reset the MIL, check monitor readiness before smog tests, and understand your vehicle's health before costly repairs. !!! Note: Fault codes can be cleared after resolving the underlying issue, the code reader itself does not have a reset function.
- ENHANCED OBDII DIAGNOSTICS – Comprehensive System Testing. This engine obd2 scanner diagnostic tool offers advanced diagnostics, including testing of O2 sensors and EVAP systems. Perform a leak test on your vehicle's EVAP system and monitor the fuel tank's integrity. The O2 sensor test helps fine-tune the air/fuel mixture, improving fuel efficiency and reducing emissions—saving you money at the pump and reducing your car's environmental impact. !!! Note: The AD410 is only an engine code reader, it DOESN'T support other systems such as ABS, SRS, Transmission and others.
- QVGA DISPLAY & NEW UI – Easy-to-Use, User-Friendly Interface. The AD410 scanner for car boasts a 2.4 TFT true-color LCD display (262K) for clear, easy-to-read results. With an intuitive UI design, you can quickly access OBDII diagnostics, I/M readiness checks, DTC search, and setup options. No need to read a manual—this user-friendly auto diagnostic code scanner is perfect for beginners, mechanic and seasoned users alike.
- DIAGNOSTIC REPORTS & FREE LIFETIME UPDATES. The AD410 car scanner reader allows you to review, save, or print detailed diagnostic trouble code reports. Plus, with lifetime free software updates, you’ll always have the latest features and bug fixes. Simply download the updates from the ANCEL website and follow the easy on-screen installation instructions. (Note: update is not necessary, the AD410 code reader can be directly inserted into the OBDII interface of the car to use, if it doesn't work, then consider updating the device.) The ANCEL website provides the latest product user manual, which can be downloaded and viewed at any time.
- Professional OBD2 Scanner Diagnostic Tool with Powerful Functions:OBD2 scanner code reader feature built-in 35901 OBD2 DTCs lookup library, As professional car scanner, the obd2 scanner diagnostic tool will help you to determine the cause of the engine light,read I/M readiness, Read & clear codes, turn off engine light or MIL, view freeze frame, retrieve vehicle VIN, battery voltage test, live data stream, onboard monitoring mode, and perform component testing etc
- OBD2 Scanner Built-in 35,901 DTC Lookup: The OBD2 scanner car code reader built-in 35,901 DTCs, the old model obd2 scanner diagnostic tool usually only have 3,000-10,000.the OBD2 Scanner of DTC library covers tens of thousands detailed fault code definitions that will quickly determine the fault cause and catch potential problems before they cost you a fortune. Besides, you don't need to google the meaning of each fault code.If you are looking to replace or upgrade an existing car code reader, this code reader is an excellent option.
- OBD2 Diagnostic Scanner Tool Compatible with 98% Vehicles And Multiple Languages: The code reader OBD2 scanner for cars is designed to be compatible with most vehicles manufactured after 1996 US-Based, 2000 EU-Based and Asian cars. If your car has a 16-pin OBD2 port and was produced within the specified timeline, it should be compatible with the code reader and the obd2 scanner diagnostic tool support for 10 languages: English, French, Spanish, German, Chinese, Russian, Italian, Japanese, Portuguese, Dutch, which make it easy to use for people from different countries.
- Car Scanner Diagnostic offers Convenient Data Printing：The code reader for car offers advanced features such as live data and DTC replay combined with printing function, Connect the OBD2 scanner to your computer to easily print fault data, empowering you to prevent random charges at car repair shops and save valuable time and money. Additionally, WEJOWE offer lifetime free upgrades for the device, ensuring you always have access to the latest features and improvements.
- Super Compact & What You Will Get: The OBD2 scanner tool is easy to carrying and storage,With each package, you will receive a canvas storage bag for convenient storage and a Type-C cable to connect to your computer.And Car Scanner Diagnostic offers Convenient Data Printing：The code reader for car offers advanced features such as live data and DTC replay combined with printing function, Connect the OBD2 scanner to your computer to easily print fault data, empowering you to prevent random charges at car repair shops and save valuable time and money.
- Multi-Functions - It's a practical multi-function OBD2 code reader which helps you determine the cause of the check engine light coming on, quickly read and remove diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself. Wide Compatibility - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Check compatibility with your vehicle model before purchasing. It can also be used for some motorcycle OBD2 system diagnosis. (Note: an additional specific adapter cable is needed. not included with this device) 2.8" LCD Display & Multi-language - Designed with a clear 2.8" LCD screen (128 x 64 pixels) - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector. It also supports 6 languages - English,German, Dutch, Spanish, French and Italian. This scanner is enjoyed and highly recommended by the customers worldwide. Compact Design & Easy to Use - It weighs about 12 ounces and measures 6 x 2.75 x 0.9 inches. Equiped with a 2.5 feet long heavy duty cable and the standard 16-PIN OBD connector. 6 buttons for quick operation. The plug and play design makes it user-friendly. Even if you don't have much technical knowledge, you can operate it without any hassle. "Accurate & Fast - Different with other similar scanners, the MP69033 scanner use the brand new ARM micro processor to make sure the ultra high accuracy and fast speed. With the excellent performance of the micro processor, the detailed real-time engine data can be detected and displayed on the screen in seconds. Get codes, fix the problem and turn off the CEL. If you just need a code reader to check your car, it's definitely an affordable and reliable tool.
- 【TURN OFF CEL】 This AL319 car diagnostic tool supports Reading DTCs, displaying Live Data, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light (CEL) and turning it off, to help you detect any potential problems, and to avoid excessive costs for unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months warranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- Full OBDII Modes Scanner for Car: As professional car scanner, ZM201 has all the OBD2 functions you need. Read & clear codes, turn off engine light or MIL, view freeze frame, read I/M readiness, retrieve vehicle VIN, battery voltage test, live data stream (with graphing display), built-in 35901 DTCs, O2 sensor test, onboard monitoring mode, and perform component testing etc.
- Enhanced OBD2 Scanner Diagnostic Tool: Live data and DTC replay combined with printing function, you can connect it to a computer for fault data printing, prevent auto repair shops from charging randomly, save money and time. ZM201 obd scanner also comes with free-lifetime software updates, ensuring you always have the latest features and improvements.
- 35,901 DTC Lookup: ZM201 car code reader built-in 35,901 DTCs, the old model obd2 usually only have 3,000-10,000. So the ZM201 car scanner has a huge advantage, which means that this obd2 scanner can better help diagnose and solve your vehicle faults. This is a great option if you want to replace or upgrade an existing car scanner.
- Compatible with 98% Vehicles: ZM201 OBD2 scanner for car is compatible with most cars after 1996(USA)/2002(EU)/2008(Asia). If your car has an OBD2 port (16Pin), and the production time meets the above timeline, then your vehicle is compatible. But it is not compatible with new energy vehicles, hybrid vehicles, and models that do not comply with the OBD2 protocol.
- Convenient Shortcut Functions: The addition of shortcut keys enhances the user experience. Pressing F1 enables you to quickly retrieve trouble codes, while F2 provides instant access to I/M readiness information. We've also introduced left and right navigation buttons (the previous model had only up and down buttons), making operation even more convenient.
- [Easy to Use--Work out of box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- [5 in 1 Diagnostic Scanner] Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance function.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 🔥【On-Screen DTC Definition, Save Time & Easy To Use】Autel MS309 OBD2 code reader with UPGRADED CHIP to retrive and clear generic(P0, P2, P3 and U0), manufacturer-specific(P1, P3 and U1) and pending codes, and display DTCs(Diagnostic Trouble Codes) meanings under the codes based on the built-in database(more than 3000 codes). Don't need to spend much time to search meanings on the internet. This advanced plug-and-play MS309 scanner saves you time - a must-have obd2 scanner for each car owner.
- 🔥【Retrieve Freeze Frame Data &Vehicle info】The more specific the information available, the clearer the problem. The OBD2 scanner MS309 can retrieve freeze frame data, including important engine parameters like RPM, fuel pressure, fuel trim, engine coolant temperature, etc. Also it can retrieve Vehicle Information such as VIN number, Calibration ID(s), Calibration Verification Nos. (CVNs), etc, which is useful to check whether the ECU matches when you are buying a used car.
- 🔥【Read Codes & Clear Codes】Knowing the codes in advance will brace you for the repair cost estimate so that you won't be fooled and get overcharged by the repair shop.This Autel MaxiScan MS309 obd2 scanner scans OBD2-compliant vehicle Diagnostic Trouble Codes (DTCs) in seconds to pinpoint emission-related issues. The little guy can do many basic but necessary works: read/clear codes, view DTC definition, turn off check engine light, check I/M Readiness status, retrieve freeze frame data and vehicle info.
- 🔥【Turn Off Check Engine Light】When your car detects an emission related problem, Check Engine Light will be turned on. Do you want to spend hundreds of dollars to turn off this light every time, maybe it's just a gas cap that's not tightened or needs to change bad parts like spark plugs and ignition coils? With Autel MS309 scan tool, you can read code to quickly find out why the check engine light is on and reset it.
- 🔥【Ready For Annual Smog Check】If the OBD II Readiness Monitors on your car are not “Ready”, your car may fail the smog check. MS309 OBD2 scanner can retrieve I/M Readiness status to check the monitors like misfire monitor, fuel system monitor, comprehensive components monitor, catalyst monitor, O2 sensors, EVAP, etc, to help your car ready pass the annual smog check. That way you won't waste time and money on a failed smoke check.
Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
