NHTSA ID Number: 10149053
Manufacturer Communication Number: PIT5438E
Summary
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a click, rattle or a squeak nose coming from the dash. Technician will use Service Information to locate the Accessory AC and DC Power Control Module located to the right of the steering column. Remove the power inverter module and apply two sided tape to the module bracket to insulate it from the mount. The instrument panel accessory bezel will also need to be removed. Apply flocking tape to the instrument panel accessory bezel retainers. Also the instrument panel extension will need to be removed. Apply foam tape around connectors located under grill to prevent them from rattling on grill. Apply flocking tape to the instrument panel extension retainers and apply a strip of foam tape along the edge of the grill to isolate the grill from the dash.
32 Affected Products
Vehicles
CADILLAC | ESCALADE | 2015-2019 |
| CHEVROLET | SILVERADO | 2017 |
| CHEVROLET | SILVERADO 1500 | 2014, 2019 |
| CHEVROLET | SILVERADO 2500 | 2015-2016, 2018 |
| CHEVROLET | SUBURBAN | 2015-2019 |
| CHEVROLET | TAHOE | 2015-2019 |
| GMC | SIERRA | 2017 |
| GMC | SIERRA 1500 | 2014-2016, 2019 |
| GMC | SIERRA 3500 | 2018 |
| GMC | YUKON | 2015-2018 |
| GMC | YUKON XL | 2019 |
Parts
| Two Sided Tape | As Required | P40519
Installbay - Kent Double Stick Tape 1/2 Inch x 50 Feet - Each (P40519)
|
| BRS Flocking Tape | As Required | KT13487 |
| Foam Tape | As Required | KT15103 |
| Screw – Instrument panel carrier to instrument panel tie bar | 1 | 11547755
General Motors 1/4"-20 UNC Hex Bolt, Black Oxide, 4mm, Blue, Grade 8, Carbon Steel
|
SEOCONTENT-START
Bulletin No.: PIT5438E
Published date: 10/29/2018
Preliminary Information
PIT5438E Click / Rattle / Tick / Pop / Creak / or Squeak Noise from Dash Area
Models
| Brand: | Model: | Model Years: | VIN: | Engine:
| Transmissions:
| |
|---|---|---|---|---|---|---|
| from | to | |||||
| Cadillac |
Escalade | 2015 – 2019 | All | All | All | All |
| Chevrolet |
Silverado 1500 | 2014 | All | All | All | All |
| Chevrolet |
Silverado | 2015 – 2018 | All | All | All | All |
| Chevrolet |
Silverado 1500 LD | 2019 | All | All | All | All |
| Chevrolet |
Suburban | 2015 – 2019 | All | All | All | All |
| Chevrolet |
Tahoe | 2015 – 2019 | All | All | All | All |
| GMC | Sierra 1500 | 2014 | All | All | All | All |
| GMC | Sierra | 2015 – 2018 | All | All | All | All |
| GMC | Sierra 1500 Limited | 2019 | All | All | All | All |
| GMC | Yukon | 2015 – 2019 | All | All | All | All |
Supersession Statement
This PI has been updated to add condition 7 and add a graphic and update model years. Please discard PIT5438D.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition / Concern
Condition 1: Tinny or metallic rattle type noise from the IP area to the left of the steering column.
The noise may be caused by the 110 Volt Power Inverter Module not being seated properly in the mounting bracket (if equipped with RPO K14).
Condition 2: Rattle, squeak or itch type noise from the center of the dash in the radio area.
The instrument panel accessory bezel may be rattling due to insufficient tension of retainers. Press on the bezel while duplicating noise to see if it is eliminated.
Condition 3: Rattle or itch type noise from the dash area near the windshield
Defroster grill may be rattling due to insufficient retention of retainers. Press on defroster grill ( # 1 in illustration) while duplicating concern to see if it is eliminated.
Condition 4: Rattle, tick, knock type noise from the front center floor or center of dash area (Applies to trucks equipped with center console subwoofer speaker)
This concern could be caused by the radio subwoofer speaker mounting nuts either being loose or missing.
Condition 5: Creak, ticking or popping type noise heard from the left center stack area. (This issue only applies to Full Size Utilities built before November 18, 2016)
This concern could be caused by the use of an incorrect screw that secures the instrument panel carrier in place. The screw that may have been used is too long, and it may contact the instrument panel tie bar. In some cases, this noise may only occur after the vehicle has been driven for a period of time.
Condition 6: Chirp or squeak noise coming from the lower left side of the center stack area.
This concern could be caused by loose retaining nuts on the chassis harness retention bracket that is located below the brake booster.
Condition 7: Rattle noise coming from the drivers footwell area.
This concern could be caused by the IP junction block cover moving and causing a rattle noise.
Recommendations / Instructions
Correction 1 (for vehicles equipped with 110 Volt AC Converter RPO K14):
Follow SI to locate the Accessory AC and DC Power Control Module located to the right of the steering column.
See #1 in photos below:
Inspect the power inverter module for possibly moving slightly against mounting bracket and creating the noise.
Remove the K14 power inverter module and apply two sided tape to the module bracket to insulate it from the mount.
Two sided tape is available through Kent Automotive, part # P40519 which is a ½”x 50’ roll or it may be obtained locally.
Correction 2:
Wrap Kent automotive BRS flocking tape part number KT13487 over retainers (#1 in illustration) and reinstall bezel.
This will require an application of BRS flocking tape on ten retainers (one strip @ 1” x 10”). Two sheets should repair 16 vehicles.
Correction 3:
Remove defroster grill.
Apply foam tape around connectors located under grill to prevent them from rattling on grill. See # 1 in illustrations.
Apply foam tape to all mounting hooks in the front of the defroster grill # 1 and apply a strip of foam tape along the edge of the grill to isolate the grill from the dash #2.
Wrap Kent automotive BRS flocking tape part number KT13487 over the metal retaining tabs that secure defroster grill in position #3.
Foam tape can be obtained from Kent Automotive, part # KT15103 (40 ft roll) or it may be obtained locally.
This repair will require 1 ½ meters with a 40 foot roll covering approximately 25 vehicles per roll. There are 22 retaining tabs that will each require an application of 1” of BRS flocking tape for a total of 20”. Two sheets will repair 7 vehicles.
Correction 4:
To correct this issue, inspect the center console subwoofer speaker (2) mounting nuts (1) for being loose or missing. Subwoofer speaker mounting is shown below. Install and tighten the subwoofer speaker mounting nut(s) to 6 Nm (53 lb in).
Correction 5: (This issue only applies to Full Size Utilities built before November 18, 2016)
The screw shown in the photos below may be too long and the screw tip actually contacts the instrument panel tie bar. This contact is shown as item #4 below. This screw secures the instrument panel carrier to the instrument panel tie bar.
Chevrolet/GMC models are shown as item# 1 and a close-up of this fastener can be seen as item #2. Replace this screw with a shorter fastener, GM part number 11547755, which is approximately 24 mm in length.
Cadillac models can be seen in item #3 below. Replace this screw with a shorter fastener, GM part number 11547755, which is approximately 24 mm in length as well.
Correction 6:
The following picture shows the chassis harness retaining bracket and nuts (2) below the brake booster (1). Verify the retaining nuts are tight.
Correction 7:
To correct this issue use foam tape to insulate the IP junction block cover to prevent movement which is causing the rattle type noise.
Parts Information
| Description | Qty | Part Number |
| Two Sided Tape* | As Required | P40519
Installbay - Kent Double Stick Tape 1/2 Inch x 50 Feet - Each (P40519)
|
| BRS Flocking Tape* | As Required | KT13487 |
| Foam Tape* | As Required | KT15103 |
| Screw – Instrument panel carrier to instrument panel tie bar | 1 | 11547755
General Motors 1/4"-20 UNC Hex Bolt, Black Oxide, 4mm, Blue, Grade 8, Carbon Steel
|
| * Contact Kent Automotive at 1-888-YES-KENT or online at www.kent-automotive.com | ||
Warranty Information
For vehicles repaired under warranty, use:
| Labor Operation | Description | Labor Time |
| 5420220 | Condition 1
Accessory AC and DC Power Control Module Replacement |
Use Published Labor Operation Time |
| 1030730 | Condition 2
Instrument Panel Accessory Bezel Replacement |
Use Published Labor Operation Time |
| 1032590 | Condition 3
Instrument Panel Extension Replacement |
Use Published Labor Operation Time |
| 3421660 | Condition 4 | Use Published Labor Operation Time |
| 1080418* | Condition 5 | 1.2 hrs |
| Replace one instrument panel carrier to instrument panel tie bar screw | ||
| 5430170 | Engine wiring harness junction replacement |
Use Published Labor Operation Time |
| 1030630 | Condition 7
Instrument panel fuse block access hole cover replacement |
Use Published Labor Operation Time |
| * This is an unique labor operation for bulletin use only. This will not be published in the Labor Time Guide. | ||
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
SEOCONTENT-END
Bulletin No.: PIT5438E
Published date: 10/29/2018
To View or Download this Document Click Here
Bulletin No.: PIT5438C
Date: Nov-2016
To View or Download this Document Click Here
Bulletin No.: PIT5438B
Date: Mar-2016
To View or Download this Document Click Here
Bulletin No.: PIT5438A
Date: Oct-2015
To View or Download this Document Click Here
Bulletin No.: PIT5438
Date: Jul-2015
To View or Download this Document Click Here
- 【Pro Chaser Power Inverter Basics】: This inverter provides a steady 400W of DC to AC power with a peak output of 800W. Equipped with dual 110V AC sockets and two high-speed 3.1A USB ports, it's perfect for powering your devices on the go.
- 【Road Trip Ready】: Power up your journey with 4.8A dual USB ports for fast charging of phones, tablets, cameras, and more. The AC outlets easily handle 300W–400W devices like laptops, breast pumps, DVD players, and bottle warmers—making travel with tech and family a breeze.
- 【Portable and Flexible】: This compact, cellphone-sized inverter comes with a 30-inch (75cm) cord for maximum flexibility—ideal for travel, outdoor adventures, and everyday on-the-go charging.
- 【Safety You Can Trust】: Enjoy peace of mind with built-in protection against electrical risks like overloads, voltage issues, and overheating. The smart cooling fan kicks in at 113°F (45°C) to keep everything running smoothly. Comes with a 12-month worry-free warranty.
- 【Important Safety Notice】: Always use the inverter in a cool, dry environment to ensure reliable operation. It delivers powerful AC current comparable to home wall outlets—handle with caution.
- Portable Power Inverters For Vehicles: equipped with 4 USB-C/A 24W charging ports and Double 110V AC car outlet adapter to wall plug, providing ample power for smartphones, cameras, laptop, breast pump, nebulizer, game console, kindle, TV, DVD players, or other devices, ensuring that your devices are fully charged and ready to use during travel
- Camping and Outdoor Activities: In wilderness environments without access to traditional power sources, the Car Inverter can be connected to a vehicle's cigarette lighter adapter, and with 6 output ports, it can power lights, fans, small kitchen appliances, and more, making your outdoor life more comfortable and convenient
- Enhanced Cooling System: The upgraded intelligent cooling fan operates more stably and quietly, ensuring that the power inverter maintains good performance during prolonged use, extending the lifespan of the equipment and providing you with a smoother, quieter user experience
- Portability and Versatility: Measuring just 5.4×2.75×1.4 inches and weighing 9.17 oz, the design is highly rational, lightweight, and portable, taking up minimal space. Whether storing it in a car, taking it along on a camping trip, or using it as part of a mobile office, it is an ideal choice
- Warm Tips: DC 12V to 110V AC converter provides power up to 300W, Only for DC 12V and car,Do not use to power high-power electrical equipment, such as hair dryers, electric heaters, which may blow the fuse
- BESTEK Advantage Upgraded: Bestek is power inverter patents owner, America's leading power inverter brand. Our inverter tech upgraded to 11-17V compatible with Tesla. It provides 300 Watts continuous DC to AC power and 700 Watts instantaneous power, featuring 2 AC outlets and 2 USB ports
- Fast Charging: Two 110V AC outlets for charging larger devices such as laptops and tablets, 2*4.8A USB charging ports for powering USB compatible devices, a good choice as requisite car accessories
- Ultra Compact and Lightweight: iPhone-sized design ideal for use on vacations, work trips, and camping. 32 inch cigarette lighter plug makes the power inverter can be plugged into almost any vehicle
- Multi-Protection: Bestek inverter 12v to 110v Built-in 40 amps fuse to protect your device. Safe charging design provides protection against, overheating, under and over voltage charging, short circuiting
- Durable Aerospace Aluminum Housing: Bestek car inverter provides advanced protection from drops and bumps.Smart cooling fan system makes the car power inverter very silent when operating,and the fan runs faster when the device gets warmer or output power exceeds 70W
- 【1000W CONTINUOUS DC TO AC POWER CONVERSION】: Provides 1000W continuous power and 2000W peak surge, efficiently converting 12V DC from your vehicle battery to stable 110V/120V AC household power. Ideal for running laptops, small appliances, game consoles, TVs, routers, and other electronics under 1000W during road trips or outdoor activities.
- 【DESIGNED FOR CAR, TRUCK & CAMPING USE】: Perfect for road trips, car camping, truck sleepers, tailgating, van life and outdoor job sites. Turn your vehicle battery into a reliable portable power source wherever you travel.
- 【6 SAFETY PROTECTIONS & TEMPERATURE CONTROLLED COOLING】:Features undervoltage, overvoltage, overload, short-circuit and overheat protection. Intelligent cooling fan automatically activates when internal temperature rises, ensuring stable and quiet operation for extended use.
- 【SMART LCD DISPLAY WITH PROTECTION INDICATORS】: Built-in LCD screen shows input voltage, output voltage and battery status in real time. Displays protection codes including overload (OL), high voltage (HI), low voltage (LO), and overheat (OH) for easy troubleshooting and safe operation.
- 【DUAL AC OUTLETS + 36W USB-C + FAST USB PORT】: Equipped with 2 AC outlets, 36W Type-C fast charging and 5V/3A USB output to power multiple devices simultaneously. Smart charging ports automatically adjust to deliver optimal charging speed for phones, tablets and laptops.
- 〖Car power inverter〗This Car power converter is equipped with 2 U.S. standard AC outlets, 4 USB charging ports, DC 12V to AC 110V converter,perfect for charging electronic devices such as laptops, tablets, cell phones, Christmas gifts, light strings and so on.
- 〖Quiet and High Efficiency〗Our car charger adapter adopts high efficiency circuit design and advanced heat dissipation technology, which can effectively reduce energy consumption and heat dissipation noise.
- 〖Portable Design〗super compact and lightweight cigarette lighter adapter,same size as cellphone, 2.7*1.4*5 inches (8.5 oz+), space saving and easy to carry.
- 〖Multi-protection〗ABS shell is fully insulated to enhance the safety level. Safe charging technology can prevent the machine from overheating, undervoltage, overvoltage, overload, short circuit.
- 〖Excellent After-sales Service〗With heart and soul, we provide you with high quality inverters! We accept returns and exchanges and offer 24 hours consultation. Any problem can be solved within 24 hours, please feel free to contact us if you have any questions.
This product presentation was made with AAWP plugin.