NHTSA ID Number: 10112303
Manufacturer Communication Number: 16-NA-024
Summary
This technical bulletin provides a procedure to retorque a ground to correct a condition of vehicle will not start with theft deterrent message displayed and DTC P0513 set
3 Affected Products
Vehicle
| CHEVROLET | IMPALA | 2014-2016 |
SEOCONTENT-START
Bulletin No.: 16-NA-024
Date: Jan-2016
| Subject: | Vehicle Will Not Start with Theft Deterrent Message Displayed and DTC P0513: Immobilizer Key Incorrect |
| Attention: | This Bulletin also applies to any of the models that may be Export vehicles. |
| Brand: | Model: | Model Year: | VIN: | Engine: | Transmission: | ||
|---|---|---|---|---|---|---|---|
| from | to | from | to | ||||
| Chevrolet |
Impala (VIN 1) | 2014 | 2016 | All | All | ||
| Condition | Some customers may comment on the vehicle not starting while the theft deterrent message is displayed. During diagnosis, a technician may find DTC P0513 set in the Body Control Module (BCM).
Note: This Theft Deterrent Message will be displayed for a 15 minute interval. After the 15 minutes, the vehicle will start as intended. |
| Cause | This may be caused by Ground 110 being loose. |
Correction

If you encounter a vehicle with the above concern, verify that Ground 110 is not loose. Refer to Ground Distribution Schematics G100, G103, G106, G109, G110 and G111 in SI.
- If the ground is found loose, tighten to the following specs:
- RPO LCV – 12 Nm (106 lb in)
- RPO LFX – 9 Nm (80 lb in)
- If the ground is not loose, continue with diagnosis referring to SI.
Warranty Information
| Labor Operation | Description | Labor Time |
| 4069929 | Electrical Controls – Labor Only (Re-Torque Ground 110) | 0.2 hr |
| Version | 1 |
| Modified |
SEOCONTENT-END
Bulletin No.: 16-NA-024
Date: Jan-2016
To View or Download this Document Click Here
- [Please Check Compatibility Before Ordering] Functions are not universal, pls check compatibility first. You can send your car VIN# and main functions required to📩Autelonline @ outlook. com📩. 📢🚦Kindly note: Functions are very limited for G-M/ for F-ord/ for L-exus/ for T-oyota.📢🚦Warm Tips: If you meet any issues, e.g., Receiving a registered item/ Language Changing/ Function Performance/ Subscription Fee, pls don't hesitate to tell us directly, we will help you immediately.
- [Lifetime Updates with Newer Vehicles] Autel automotive diagnostic tool is a budget-friendly must-have tool for home mechanics and pros, compatible with 700+ global car models. You can always download the l.atest vehicle software, without extra cost.
- [60s Quick] The car scanner can support Report to Cloud, you can share and print it via wifi directly, time-saving. It's recommended to check compatibility first via Autelonline @ outlook . com.
- [Enhanced Hardware] The escaner automotriz boasts an impressive hardware setup, featuring an Android 9.0 system, powered by a 5X faster processor with 5.5inch 1280x720 touchscreen, 2+64GB memory, 4950mAh battery, 8MP camera, and USB 2.0 type C. Moreover, it allows wireless communication with the Autel VCI V200.
- [Wireless Communication] Equipped with the Autel MaxiVCI V200, this car scanner supports 33ft wireless diagnostics, allowing you to work in and around vehicles.
- Fitment: It is compatible with 2013 2014 2015 2016 2017 RAM 1500 2500 3500 Remote control Key. This transmitter only Supports Regular Key Vehicles, It Doesn’t Supports Push Start Button Vehicles. Please check the “Amazon Confirmed Fit” bar at the top of this page before purchasing to ensure this product is compatible with your vehicle
- Reference Number: Replacement for FCC ID: GQ4-53T; Frequency: 433MHz. Part Number: 56046955AG, 56046955AA, 56046955AB, 56046955AC, 56046955AD, 56046955AE, 56046955AF. Please match the FCC ID and chip, button etc. information carefully before purchase
- Do It Yourself Solution: You can set up your key fob completely at home without professional help or installation—saving money and valuable time. The process is simple: plug the matching OBD II tool into your car’s diagnostic port, follow the clear on-screen instructions, and complete the setup in minutes. With a detailed illustrated manual included, you can get started quickly and easily
- Package Included: x2 Remote Key Fobs, x1 DIY Tool with manual, x2 Interchangeable Button Keypads. Each remote key comes supplied with a battery, fully installed and pre-tested to ensure quality. Warning: The key fobs are not waterproof. We recommend performing the setup indoors or in a shaded area like a garage, as the screen may be difficult to read in direct sunlight
- Please Note: This key does not support The comfort entry function. The comfort entry function means you can unlock your car door without using a key or pressing a key fob button. Before hook up, please make sure that the voltage of the vehicle battery is sufficient to avoid the system reporting error due to power cut halfway. Upgrade Guidelines(Try it when have any issue). Please feel free to leave a message if you encounter any problems
- 📌【Check Before Purchase】This Autel OBD2 scanner CAN’T work for Benz, for BMW, for Toyota
, for Lexus
, for GM, for Chrysler, for Ford
and for Nissan
. Please DO provide the 17 digits VIN to 💌 autelusa @ outlook . com to check compatibility before purchase! For FCA vehicles after 2018, need 12+8 Cable or FCA Aut0.auth Subscription. - 【Advanced Hardware Configuration】Autel scan tool comes with user-friendly Android 9.0 OS, Rockchip PX30 Processor, 5.5-inch 1280x720 resolution, 2GB RAM &64GB ROM, 8MP Camera, 4950mAh battery, Bluetooth 5.0 Communication, WIFI Update, USB 2.0 type C Charging interface.
- 【Lifetime F.ree Updates】Autel automotive diagnostic tool enjoys lifetime f-ree software updates, you don't need to pay extra to get the newest software, you can always download latest vehicle software for fr-ee in all lifetime.
- 【Multilingual Menu and DTC definitions】Interface supports multiple languages (e.g., English, Spanish, French) and shows definitions of diagnostic trouble codes on the screen. Send SN to change language for f.ree.
- 【Internet Updateable】The unit supports firmware/software updates via PC/Internet, enabling support for newer vehicles over time.
- DO IT YOURSELF——You can program your remote by yourself. Just download the APP and the steps are simple, safe and time-saving. Powerful, professional technical support enables programming keys at home and no need to make any appointment. One can set up to 8 keys for one same vehicle if your car system has no limit for single car use only
- Note——This product is not suitable for all car models, and a small number of cars cannot be used. Will not for Audi, for BMW, for Volkswagen, for Land rover, for Porsche, for Benz. Please contact customer service for specific inquiries
- Preparation——Need download app from the App Store or Google Play or scan the QR code, If you have one working remote with blade, please find locksmith to cut the blade first.
- High Quality——Each device undergoes strict testing before shipment to ensure proper functioning, and the advanced technology used makes the product compact and easy to carry. And the chip has undergone strict technical testing and will not cause harm to the car and keys, making it very safe and secure
- Package——This is just a device that does not include a key. If you need a new key, you will need to purchase it separately
- Wide vehicle compatibility – Works on most 1996 and newer OBD II and CAN-protocol vehicles (domestic and import).
- Retrieves generic, manufacturer-specific & pending codes
- Freeze frame data & live
- This car code reader is used to turns off Check Engine Light (MIL), clears codes
- Multilingual menu and DTC definitions.- Interface supports multiple languages (e.g., English, Spanish, French) and shows definitions of diagnostic trouble codes on the screen.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





