NHTSA ID Number: 10072508
Manufacturer Communication Number: PI1282
Summary
Shift to Park message displayed in the Drivers Information Center (DIC). May be caused by the shifter detent spring being miss-adjusted.
1 Affected Product
Vehicle
| CHEVROLET | CORVETTE | 2014 |
SEOCONTENT-START
#PI1282A: Shift to Park Message Displayed in Drivers Information Center (DIC) When Vehicle is Shut Off – (Dec 17, 2015) – PI1282
| Subject: | Shift to Park Message Displayed in Drivers Information Center (DIC) When Vehicle is Shut Off |
| Models: | 2014–2015 Chevrolet Corvette |
|---|---|
| Equipped with Automatic Transmission (RPO MYC) | |
| Attention: | This PI also applies to any of the above models that may be Export vehicles. |
This PI has been revised add the 2015 Model Year. Please discard PI1282.
Condition/Concern
Some customers may comment on a Shift to Park message displayed in the drivers information center (DIC) when the vehicle is turned off.
This condition may be caused by the shifter detent spring (1) being miss-adjusted, causing the shifter to not close the Park switch (2) as shown in the illustrations above.
Recommendation/Instructions
Follow the procedure below for inspecting and/or adjusting the shifter spring detent and Park switch.
- Remove the floor shift control boot assembly and inspect the location of the shifter spring detent. Refer to Floor Shift Control Boot Replacement in SI.
Note: If no adjustment is needed upon inspection with the detent spring while in Park, pursue with further diagnosis in SI. If the shifter spring detent is not closing the switch when the shifter is in the Park position, continue following the steps below.
- Raise the vehicle and disconnect the shifter cable as shown in the illustrations above. Refer to Lifting and Jacking the Vehicle in SI.
- Lower the vehicle.
- With the shifter in the Park position, loosen the screw retaining the shifter detent spring, as shown in the illustration above, and lightly move the shifter forward.
Note: Once the shifter is lightly moved forward, the detent spring will close the Park switch as shown in the illustration above.
- Tighten the screw retaining the shifter detent spring.
Tighten
Tighten the screw to 3 Nm (26 lb in).
- Cycle the plunger rod multiple times. Confirm the shifter operation and that the Shift to Park message is no longer displayed.
Note: Confirm ALL shifter operations and make sure that the Shift to Park message is no longer displayed in the drivers information center (DIC).
Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time |
| 8480138* | Adjusting the Shifter Spring Detent | 0.8 hr |
| *This is a unique Labor Operation for Bulletin use only. It will not be published in the Labor Time Guide. | ||
SEOCONTENT-END
Bulletin No.: PI1282
Date: July, 2014
To View or Download this Document Click Here
- Non-Scratch Pry Tools: Made from durable nylon, this auto trim removal tool kit protects your car’s surfaces from scratches while offering strong leverage for trims, panels, and dashboards
- Essential for Panel Jobs: This car panel removal tool set makes removing dashboards, door panels, and plastic trim fast and simple, whether you're working on a car, SUV, or other vehicle types
- Flexible and Durable Build: Designed to last, each car trim removal tool is sturdy yet flexible enough to handle tight angles and edges during disassembly without damaging fragile surfaces
- Universal Clip Tool Set: Includes multiple shapes for different applications; this clip removal tool helps safely extract rivets, fasteners, and car clips without prying metal-to-metal
- Compact for Any Job: The lightweight car trim removal tool kit fits easily in your glove box or toolbox, ready for quick access whenever you need to fix, replace, or upgrade car interiors
- SLEEK and DURABLE: Our auto trim removal tool set fits in any crevices and works efficiently in removing exterior and interior trim, wheel hubs, door panel. without scratching your car.
- UNIVERSAL AUTO TRIM REMOVAL TOOL KIT: It includes 5 job-specific auto trim removal tools to make automotive removals easy. It is designed to be universally applicable to vehicles, boats, and more
- UNIQUE ERGONOMIC DESIGN: These are made of sturdy and pliable nylon material with a unique ergonomic design for easy handling to effectively save effort and time on repairs or maintenance.
- EASY and CONVENIENT: Perfect for professionals and beginners doing any care modifications. They are compact, making them easy and convenient to carry so you can use them anytime, anywhere.
- DO REPAIR and MAINTENANCE LIKE A PRO: We are confident you'd love this car plastic trim removal tool kit as much as we do Get yours now and perform repair or maintenance tasks like a pro
- 19 Pcs Trim removal tools - Works great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration
- High Quality Trim Tools - Made of toughened nylon fibers with the strength to pry up panels and pop off panel retaining pins for non-destructive automotive modifications
- Ergonomic Design - These door panel removal tools are easy to grip and fit into hard-to-reach spaces and crevices. Saves time and labor on all kinds of car interiors and exteriors
- Easy for Storage - Auto trim removal tool kit comes with a portable zippered storage bag to organize all your tools after use. You never have to worry about losing your tools
- Package Include - 11pcs interior trim tools, 2pcs fastener remover tools, 2pcs stereo removal tools, 3pcs car terminal removal tools, 1pc trim clip removal Pliers, and a portable storage bag
- Damage Prevention - The trim removal tool boasts a larger, flatter, and wider contact area compared to traditional tools. Its integrated wedged center significantly enhances removal efficiency while preventing damage to both trim and walls.
- Superior Material and Durability - Our trim puller is made from carbon steel and 65Mn steel with black electrophoretic and polished finish, which protects against corrosion and gives our pry bar added durability and strength. So the Trim Puller is a very beefy tool, and it will hold up well to repeated whacking.
- Versatile Application for Precision Projects - Perfect for commercial tasks and meticulous remodel projects, including applications in cabinets, countertops, and flooring. From kitchen remodels to delicate tile removal, it excels in precision work such as extracting staples with minimal effort.
- Ergonomic Design for Comfort - All our trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact-absorbing TPR+PP handle makes it comfortable to hold, though.
- Revolutionary Tool - Our Trim Puller is a very beefy tool. The Built-in spring design assists in separating the trim from the wall freely and quickly. The 15-degree wedged center is for easy extraction of trim and baseboards.Goldblatt holds a U.S. patent for this Trim Puller, patent number US 11,142,921.
- Complete trim removal tool kit: 1 pcs 2-in-1 clip 2 pcs fastener removal tool & 4 plastic pry tools .no sharp edges to harm surfaces
- Portable & handy: This trim removal kit is compact and car-friendly, perfect for keeping in your vehicle so you're always ready for emergency repairs
- Wide application: These 7-piece clip pliers and pry bar tools are engineered for universal automotive applications, including but not limited to door panel removal,dashboard disassembly,interior trim detachment,bumper and fender liner access and upholstery and headliner repair
- Precision fit for tight spaces:The tapered, non-marring pry bars slide effortlessly into narrow gaps between panels, dashboards, and trim pieces—no prying with screwdrivers or risking paint damage
- Simply let us know customer services for help,replacement or refund if you have any problems with your Doaho 7 pcs clip pliers set and fastener remover
This product presentation was made with AAWP plugin.