“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10026482
Manufacturer Communication Number: 08207
Summary
GM: SUNROOF WATER LEAK; INSTALL DRAIN TUBE EXTENSIONS. VEHICLES EQUIPPED WITH A SUNROOF MAY HAVE A CONDITION IN WHICH WATER IS NOT PROPERLY DRAINED AWAY FROM THE SUNROOF. CSC LETTER WAS RECEIVED. UPDATED 11/4/08. *PE
5 Affected Products
Vehicles
MAKE | MODEL | YEAR |
BUICK | ENCLAVE | 2008 |
GMC | ACADIA | 2007-2008 |
SATURN | OUTLOOK | 2007-2008 |
Parts
Description | Qty/ Vehicle | Part Number |
Tube, Sun Rf Hsg RR Drn | 2 | 25930220 |
Tie Straps | 6 | To Be Obtained Locally |
SEOCONTENT-START
Subject: | Sunroof Water Leak – Install Drain Tube Extensions |
Models: | 2008 Buick Enclave |
2007-2008 GMC Acadia | |
2007-2008 Saturn OUTLOOK | |
Equipped with a Sunroof |
08207
2008 model year Buick Enclave; 2007-2008 model year GMC Acadia and Saturn OUTLOOK vehicles equipped with a sunroof may have a condition in which water is not properly drained away from the sunroof.
If this condition were to occur, water may enter the interior of the vehicle and dampen the carpet, upholstery, and other interior components.
Install drain tube extension assemblies, and ensure that the water drains properly.
Involved are certain 2008 model year Buick Enclave; 2007-2008 model year GMC Acadia and Saturn OUTLOOK vehicles equipped with a sunroof and built within these VIN breakpoints:
Year | Division | Model | From | Through |
2008 | Buick | Enclave | 8J100004 | 8J168550 |
2007 | GMC | Acadia | 7J100150 | 7J175624 |
2008 | GMC | Acadia | 8J100942 | 8J168630 |
2007 | Saturn | OUTLOOK | 7J100003 | 7J175620 |
2008 | Saturn | OUTLOOK | 8J100640 | 8J168626 |
Parts Information
Part Number | Description | Qty/ Vehicle |
25930220 | Tube, Sun Rf Hsg RR Drn | 2 |
To Be Obtained Locally | Tie Straps | 6 |
Service Procedure
Important: Before lowering the headliner, please perform the following steps to avoid damage to the interior trim.
- On the assist handle, use a small screwdriver to open both screw covers by prying carefully from the inboard edge. Remove the screws.
- On the “A” pillar and “D” pillar, use a small screw driver to open the screw cover by prying carefully from the bottom edge. Remove the screws.
- On the “B” pillar and “C” pillar, use a small screw driver to open the screw cover by prying carefully from the top edge. Remove the screws.
- Remove the partition hooks by twisting counter clockwise and remove the screws, also remove the bolt under the armrest.
- Before lowering the headliner, remove the screws inside the roof air deflectors.
Add Sunroof Drain Hose Extensions
Extend both middle drain tubes by adding sunroof drain tube extensions.
- Lower the headliner following Service Information procedures.
- Add a tube assembly (drain extension) to each middle sunroof drain and install the clamps to the module drain spout.
- Add a tie strap to both middle-connector to module drain spout in the location shown and clip off excess lead with wire snips.
Important: Make sure there are no dips in the hose after the extension has been added. Refer to the illustration. In some cases, it may be necessary to trim off some of the drain tube to eliminate the dip in the drain tubing.
- The drain hose should be straight with a slight downward angle to the rear of the vehicle.
Check Drain Hose Routing Between the “B” and “C” Pillar for Proper Routing
Figure 1 — Incorrect Routing
Figure 2— Correct Routing
- After installing the extensions, make sure that the hose is routed in back of the air bag bracket. Figure 1 is the incorrect routing; Figure 2 shows the correct routing.
- Make sure that there are no bends pointing upward in the drain tubes.
Check All Drain Hose Connections and Add Tie Straps
- Check the front and rear sunroof drain hose connections to make sure they are fully seated and add a tie strap to each front and rear connection. Clip off excess lead with wire snips.
- Reinstall the headliner following Service Information procedures.
Modify Front Drain Hoses
- Remove the “A” pillar trim and defroster outlet grille to gain access to the end of the drain tubes.
- Remove the rubber grommet at the end of the drain tube.
- Using a light-duty X-Acto knife, carefully remove the cross hatch inside the grommet and reinstall. Another solution is to utilize a 3/8 in spot weld drill bit to remove the cross hatch.
SEOCONTENT-END
NHTSA ID Number: 10026482
Manufacturer Communication Number: 08207
https://www.nhtsa.gov/recalls?nhtsaId=10026482
Bulletin No.: 08207
September 2008
https://www.nhtsa.gov/recalls?nhtsaId=10026502
https://static.nhtsa.gov/odi/tsbs/2008/CSC-10026502-7374.pdf
To View or Download this Document Click Here
Bulletin No.: 08207A
September 2008
https://www.nhtsa.gov/recalls?nhtsaId=10026541
https://static.nhtsa.gov/odi/tsbs/2008/CSC-10026541-2057.pdf
To View or Download this Document Click Here
“This site contains affiliate links for which OEMDTC may be compensated” |
- 🔥Fits:Chevy Traverse, GMC Acadia, Buick Enclave Replace GM F Retainer 84691055
- 🔥Introduction: Due to oxidation caused by long-term use or exposure to harsh environments, the OEM latch is damaged and the sunroof sunshade cannot be closed. Pardeson's latches are made of ABS material, allowing you to perfectly cope with harsh environments and fix the sunroof sunshade, improving your driving experience.
- 🔥Installation instruction:Easy to install and easy to use
- 🔥Service: We will provide customers with 24-hour online service, if you have any questions, please contact us immediately
- 🔥Warranty:We also offer a 3-year warranty from the date of purchase, in case of failure, cracking, stop working or any other problem, please request a replacement or refund service immediately
- Product Type :Auto Part
- Package Dimensions :8.4" L X4.6" W X2.8" H
- Country Of Origin :United States
- Package Weight :1.4Lbs
- Allows you to control your vehicle's sunroof
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
- [High quality]: This Car Sunroof Sun Shade is made of Mesh Cloth + Soft Magnetic, UV heat reflecting coating, effectively reduce the temperature inside the car.
- [Widely used]: The Magnetic Car Sunroof Sun Shade size 39.4*25.6 inch, suitable for most Cars, SUVs, MPVS, trucks and other iron roof models. Please check your Car Sunroof Screen size before purchase to make sure the car sunroof screen size fits your car.
- [Comprehensive Sun protection]: Black mesh fabric can maximize the reflection of sunlight, block harmful UV rays, rays and glare, effectively reduce the temperature of the Car in the hot summer, avoid your children and family exposed to bright light, high temperature and harmful sunlight, shading car accessories are essential for long trips.
- [Easy to use and store]: Unroll the Sun Shade Magnetic Mesh net and place it on the roof of the car.Magnetic strip stitching can be well adsorbed to the iron roof. When not in use, you can put it in the trunk of the storage bag you received as a gift.
- [Car roof Cover for Overnight Camping]: Magnetic Car Sunroof Sun Shade Breathable Mesh Magnetic car sunroof Sun shade Breathable Mesh suitable for camping, traveling etc, and can give you a great driving experience. It is an essential car accessory for every car owner.
- Fits Like A Glove: Incredible Custom-design Loved by 500,000+ Tesla Owners. BASENOR 2020-2024 Model Y glass roof sunshade with an identical shade of gray to the factory roof, seamlessly integrates with the panoramic roof and looks like it came straight from the Tesla assembly line. Not only does it enhance the aesthetic of your Model Y, but also provides a cooler driving experience with its two-layer combination of high-density mesh fabric and dot reflective layer.
- Won't Sag: Unlike other products on the market, Our upgraded split-type visor design fits seamlessly with your Model Y roof, a separate sunshade design that conforms effortlessly defying sagging.
- Superior Sun Protection: Tesla Model Y top sunshade features a collapsible rigid frame and a reflective sunshade that expertly repels heat. Engineered to block two-thirds of the solar thermal load, it provides reliable protection against harmful UV rays and excessive heat, ensuring a comfortable driving experience.
- Easy To Install: Watch our video to the left for a quick tutorial on the installation process. Complete with clips and Velcro for a swift setup, you just need to fix the Tesla Model Y sunshade with the clips and Velcro. The package includes glass roof sunshades, clips, Velcro, and a free zippered storage pouch.
- Retractable Design: Easily retract or deploy the sunshade to suit your preference. With its user-friendly design, installation and adjustment are hassle-free, allowing you to enjoy optimal sun protection with minimal effort.
- REPLACES PART NUMBER: 54102757016, 54102755848, 54102755849.
- PREMIUM MATERIAL: Sunroof cover is made of durable fabric and plastic, strong and wear-resistant, not easy to break and deform. High density fabric, better shading effect, long service life.
- FUNCTION: Car sunshade cover is convenient for daily use and is a good replacement sunshade accessory for cars under sunshine. It can effectively reduce the temperature in the car and keep the interior cooler.
- INSTALLATION TIPS: You can install it yourself or after watching some installation videos. If there is a tight or stuck or protruding sound, it indicates that there are scratches, burrs, foreign objects, etc. in the track, and it must be cleaned up smoothly.
- FITMENT: Sunroof curtain shade sunroof cover is compatible with 2007-2016 Mini Cooper R55 R56. Please carefully check your vehicle model and the part numbers to make sure the part is compatible, or ask us for help to avoid unnecessary return.
- Reference OE part number: 54107237592, 54107237593, 54107237591, 54 10 7 237 593, 54 10 7 237 592, 54 10 7 237 591.
- Fitment: the sunroof shade cover comaptible for X1 F45 2016-2018 Black Sunroof Sunshade Shade Curtain Cover.
- Note: Do not open the curtain until it is installed, it will cause the spring to roll and confuse. Pay special attention to the plastic tabs on both sides, be sure to make sure to install them completely and correctly to the two side slides and make them firm, otherwise it will cause looseness leading to non-operation or spring confusion.
- High performance: roller sunroof sunshade cover is convenient for daily use and is the good replacement sun shade accessory for cars under sunshine. It can effectively reduce the temperature in the car and keep the interior cooler.
- Material: the car sunroof sunshade cover is made of quality cloth, durable and long service life for the car sunroof protection. Easy installation, but professional installation is highly recommended.
- Fit for Volkswagen Tiguan 2018-2009.
- Fit for Audi Q5 2017-2010.
- Package Included: 1Pcs Beige Sunroof Sunshade Cover.
- High Quality: Using high quality sunshade materials, wear resistance, dirt resistance, corrosion resistance and other advantages.
- Easy Installation: Replace the old product, directly replace, plug and play, no drilling or cutting, just align the buckle and insert, strong and not easy to fall off.
Last update on 2024-04-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.