| Subject: | PIP5288 – Oil Leak From The Oil Filter |
| Models: | 2015 Cadillac Escalade |
| 2015 Chevrolet Silverado 1500 Suburban, Tahoe | |
| 2015 GMC Sierra 1500 Yukon Yukon XL | |
| Built with RPO’s 5.3L 6.2L L83 L86 | |
| With a engine build of K and between dates 15005 – 15117 | |
| St Catherine’s engine plant= K | |
| The numbers in the box are the date code |
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern
Engine oil leak at the oil filter location of the oil pan.
With a engine build of K and between dates 15005 – 15117
St Catherine’s engine plant= K
The numbers in the box are the date code
Recommendation/Instructions
If a loose oil filter adapter is found to be the cause of the engine oil leak,
Tighten oil filter adapter to 55 Nm or (40 lb ft)
Clean oil pan of any residual oil
without completing every step, the remaining steps do not need to be performed.
SaleBestseller No. 1
Valvoline MaxLife High Mileage 5W-30 Synthetic Blend Motor Oil 5 Quart
- Formulated for engines with 75,000 miles or more, Valvoline MaxLife High Mileage synthetic blend is formulated with seal conditioners to help prevent oil leaks and reduce oil consumption
- Delivers 20% better wear protection and 15% better sludge defense than industry standards to help prevent engine breakdown
- Extra detergents safeguard against friction, corrosion and deposits to keep high-mileage engines clean
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency
- Provides performance benefits for high mileage, new and re-built engines alike
SaleBestseller No. 2
Valvoline Advanced Full Synthetic SAE 5W-30 Motor Oil 5 QT
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
- Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
- Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
- Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
SaleBestseller No. 3
Castrol GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 5 Quarts
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
- Advanced additives that help prevent engine wear | Improved Fuel Economy**
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Bestseller No. 4
Mobil 1 Advanced Full Synthetic Motor Oil 5W-30, 5 Quart
- Mobil 1 advanced full-synthetic motor oil 5W-30 utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
Bestseller No. 5
Mobil 1 High Mileage Full Synthetic Motor Oil 5W-30, 5 Quart
- Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
This product presentation was made with AAWP plugin.