Transport Mode On Message Displayed In DIC And/or Battery Light Is Flashing

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10137386

Manufacturer Communication Number: 110849001W

Summary

This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.

170 Affected Products

Vehicles

Condition

Transport Mode On message is displayed in the DIC and/or the red battery light is flashing. Transport Mode is intended for use for vehicles being shipped over long distances, and includes vehicles shipped into and outside of the United States and Canada.

Some products will be shipped from the assembly plant with Transport Mode On. The Transport Mode feature when enabled reduces the parasitic electrical load on the battery when the vehicle is parked, which extends the battery stand time up to 70 days without the battery going dead.

To alert the operator that Transport Mode On is enabled, the red battery light will be flashing and if equipped with a DIC, it will display a Transport Mode On message. Twenty-four hours after transport mode is turned On, with the vehicle Off, (with exception of 2015 Full-Size SUVs equipped with RPO AVF, and continuing in later model years without AVF) the key must be used to enter the vehicle, as the following functions will be disabled: Passive Entry, Remote Keyless Entry, Content Theft. For 2015 Full-Size SUVs (Cadillac Escalade models, Chevrolet Suburban, Tahoe, GMC Yukon Models), with RPO AVF, and continuing in later model years without AVF; the Remote Keyless Entry function will remain enabled during transport mode, allowing entry without a key. Exit lighting timers will function but will be reduced.

Note: For PEPS vehicles in Transport Mode On, the key fob will operate for the Start/Stop button, as long as the fob is inside the vehicle.

When the vehicle is running, the only difference in operation will be the DIC Message and the battery light flashing. The Passive Entry and Remote Keyless Entry functions are restored with the ignition in Run.

Procedure

Note: Normal vehicle diagnostics and/or service procedures should not be performed when Transport Mode is On. Turn Transport Mode Off prior to performing system checks or service procedures.

With Transport Mode On, enter the vehicle using the steps below:

Attempt to unlock the vehicle with the FOB.
If the vehicle is not responding to the FOB, press the PEPS door handle switch a few times (if equipped) then attempt to unlock the vehicle with the FOB.
If the vehicle is not responding to the FOB, the key must be used to enter the vehicle.
Turn the Transport Mode On/Off using the vehicle specific procedure.

2019 Chevrolet Silverado LD and GMC Sierra LD

Transport Mode is enabled by activating the hazard flashers, applying the brake pedal, and then turning the ignition key to the start position or pushing the ignition mode switch with the foot on the brake for greater than 15 seconds. The mode is disabled by repeating the previous process. The DIC (if equipped) will display Transport Mode On when enabled and Transport Mode Off when disabled. For vehicles not equipped with a DIC, the battery indicator light will constantly flash on the instrument cluster when Transport Mode is On. This feature can be used as many times as necessary if the vehicle is to be stored for an extended period of time.

2017-2019 Chevrolet Bolt EV

To turn Transport Mode On/Off, start the vehicle (as indicated by the green Ready light), activate the hazard flashers, press and hold the brake pedal, then press and hold the Start/Stop button at least 15 seconds. Transport Mode On/Off message will display on the DIC. Then turn the hazard flashers off. Allow the vehicle to sleep at least 2 minutes prior to restarting.

2016-2019 Buick Cascada

To turn Transport Mode On/Off, start the engine, activate the hazard flashers, hold the ignition key in the Start position for 20 seconds (the engine will not be started again). Transport Mode On/Off message will display on the DIC.

2016-2019 Buick Envision / 2018-2019 Chevrolet Equinox, GMC Terrain

To turn Transport Mode On/Off, start the vehicle, press the brake pedal, activate the hazard flashers, hold the start button for at least 15 seconds. Transport Mode On/Off message will display on the DIC and the Battery Warning light will flash.

2015-2018 Chevrolet City Express Procedure

To turn Transport Mode Off, remove the X51A Fuse Block — Instrument Panel Cover, push down the shorting pin and turn the ignition key 2 times to the Run position without turning the vehicle On. To turn Transport Mode On, with the ignition off, remove the X51A Fuse Block — Instrument Panel Cover, pull up the shorting pin, and turn the ignition key 2 times to the Run position without turning the vehicle On. Confirm by message on display.

2011-2019 Vehicle Procedure (Excluding Buick Cascada, Buick Envision, Chevrolet City Express, Chevrolet Bolt EV)

To turn Transport Mode On/Off, start the vehicle, activate the hazard flashers, press the brake pedal (automatic transmission) or clutch pedal (manual transmission) then press and hold the Start/Stop button or turn the ignition key to the crank position for 15 seconds. (The engine will turn Off on push button vehicles.) The same steps are used to turn On the feature.

Note: When removing the Chevrolet SS from Transport mode, the Service Front Camera message may display in the DIC, no codes are set and should appear only one time. Cycle ignition once to clear. No diagnostics or repairs are required.

2010 Chevrolet Camaro Procedure

To turn Transport Mode On/Off, activate the hazard flashers, turn the ignition key to the crank position, and then hold it in the crank position for 15 seconds. Transport Mode Off message will display and the battery light will turn Off.

2010 Cadillac SRX Procedure

To turn Transport Mode On/Off, push and hold the Start/Stop button while the brake is applied for 15 seconds or until the Transport Mode On/Off message is displayed. For SRX, if Transport Mode is enabled, this causes the RKE system to only work when the ignition is On or the BCM is awake (approximately 20 minutes after ignition Off).

1 Associated Document

Manufacturer Communications

Bulletin No.: 11-08-49-001W
Date: April, 2018

https://www.nhtsa.gov/recalls?nhtsaId=10137386

MC-10137386-9999.pdf 69.19KB

Taking too long?

Reload document

Open in new tab

Download [67.57 KB]

NHTSA ID Number: 10126068

Manufacturer Communication Number: 11-08-49-001V

Summary

1 Associated Document

Manufacturer Communications

Bulletin No.: 11-08-49-001V
Date: July, 2017

https://www.nhtsa.gov/recalls?nhtsaId=10126068

MC-10126068-9999.pdf 505.2KB

Taking too long?

Reload document

Open in new tab

Download [493.36 KB]

NHTSA ID Number: 10116538

Manufacturer Communication Number: 11-08-49-001U

Summary

1 Associated Document

Manufacturer Communications

Bulletin No.: 11-08-49-001U
Date: Jan-2017

https://www.nhtsa.gov/recalls?nhtsaId=10116538

MC-10116538-9999.pdf 95.735KB

Taking too long?

Reload document

Open in new tab

Download [93.49 KB]

NHTSA ID Number: 10137625

Manufacturer Communication Number: 11-08-49-001T

This technical bulletin is a revision for 11-08-49-001M to update the Condition.

1 Associated Document

Manufacturer Communications

Bulletin No.: 11-08-49-001N
Date: Feb-2015

https://www.nhtsa.gov/recalls?nhtsaId=10113570

MC-10113570-9999.pdf 90.285KB

Taking too long?

Reload document

Open in new tab

Download [88.17 KB]

SaleBestseller No. 1

BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android - No Subscription Fee - OBD2 Car Scanner and Code Reader - Diagnose Check Engine, ABS, SRS, Airbag & 7000+ Issues on Vehicles 1996+

[Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
[Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
[Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
[Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
[User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.

SaleBestseller No. 2

GEARWRENCH Professional Bi-Directional Diagnostic Scan Tool | GWSMARTBT

OE-Level diagnostics on your smart device
FREE Software updates - No subscriptions, no fees – EVER
Full bi-directional control, live actuation test
Supports 23 vehicle reset/relearn functions, including throttle matching, ABS bleeding, TPMS reset, etc.
Live data mapping and freeze frame capturing

Bestseller No. 3

TOPDON ArtiDiag Pro Bidirectional Scan Tool, ECU Coding OBD2 Scanner Diagnostic Tool, 2 Years Free Update(Worth 300)/FCA Autoauth/35+ Services/All System Diagnosis

2025 Advanced online ECU coding: Maximize the capabilities of your vehicles with the ArtiDiag Pro ECU Coding tool. This scan tool, seamlessly compatible with renowned models such as VW, A-U-D-I, SKODA, SEAT, BENZ, and more, empowers you to uncover hidden features, deactivate annoying functions, and code retrofitted components for peak performance. Ensure a backup before coding and steer clear of coding sessions on low battery levels.
Efficient Diagnostics with Bidirectional Control: Say goodbye to uncertainty, streamline diagnostics, and reclaim valuable time with ArtiDiag Pro scan tool. This bidirectional scan tool exceeds expectations, enabling targeted tests on individual actuators to swiftly identify and resolve issues. Covering lights, door locks, fuel and coolant systems, windows, wipers, EVAP, and more in vehicle components.
35+ Services Resolve 90% of Repair Challenges: Unleash maximum productivity with the ArtiDiag Pro, a scan tool that tackles 90% of maintenance issues through its 31 special functions. Effortlessly clear oil maintenance indicators with oil reset. Engage the EPB Reset for brake system management and establish precise alignment with the Steering Angle Reset to define the straight-line reference position for your vehicle.
FCA Autoauth : This diagnostic tool supports Autoauth for FCA SGW, Chrysler, Jeep, Dodge, Fiat etc. 2017 and later. NOTE: Due to Product Upgrade, there is no Chrysler 12+8 adapter, the BMW-20 Adapter in the package any more. We are sincerely sorry for the inconvenience. NOTE: Please confirm compatibility before purchase.(Topdon Website>Support>Vehicle Coverage)
Professional Customer Support: At TOPDON, your satisfaction is our unwavering commitment. Experience hassle-free support and a lifetime of expert assistance. Should you encounter any challenges, reach out to us at 833-629-4832. For returns, please damage the packaging to prevent Amazon from reselling it. Please be advised that after two years, a fee of 249 Bucks will apply for software updates.

Bestseller No. 4

TOPDON TopScan Pro, OBD2 Scanner Bluetooth for iOS & Android, Diagnostic Scan Tool for All Cars, Car Code Reader with Reset Scanner, 13+ Reset Service, 2024 Upgraded Version of Topscan Lite

[13+ Hot Service Functions for Complete Vehicle Care] - Unlock the full potential of your vehicle with the Topscan Pro, the upgraded version of the Topscan Lite. This powerful OBD2 bluetooth scanner supports 13 service resets, a significant upgrade from the Lite's 8 reset service functions. With a wide array of capabilities like oil reset, throttle adaptation, EPB reset, DPF regeneration, ABS bleeding, airbag reset, injector coding, and more, it ensures your vehicle stays in peak condition, making it the ultimate diagnostic scan tool for all vehicles.
[Comprehensive Full Systems Diagnostic] - This obd2 scanner diagnostic tool provides wireless all system diagnostics, making it an indispensable automotive tools. It supports OBDII/EOBD protocols, enabling thorough diagnostics across all major vehicle systems, including the engine, ABS, SRS, transmission, and more.
[Bi-directional Control] - Transform your driving experience with our advanced bidirectional scan tool. Designed for convenience and enhanced functionality, this system allows you to effortlessly manage your vehicle's features from both inside and outside.
[FCA Gateway Access & Flexible Subscription Plans] - The TOPDON TopScan offers enhanced support with FCA Gateway Access, allowing you to perform protected functions on FCA vehicles, including Chrysler, Dodge, Jeep, Fiat, and more. Enjoy no subscription fees for the first year with the TopScan, giving you access to advanced features at no additional cost. After the first year, choose the subscription plan that best suits your needs with monthly, quarterly, and yearly options available for maximum flexibility.
[Live Data Functionality] - Unlock real-time insights into your vehicle's performance with our escaner automotriz's Live Data function. This advanced feature allows you to monitor engine parameters and system performance on the go, providing valuable information for troubleshooting and maintenance.

SaleBestseller No. 5

LAUNCH X431 PROS Elite 2025 New Bidirectional Scan Tool, 38+ Services, ECU Coding, All-in-One Full System Diagnostic Scanner, Support CANFD&DoIP, FCA AutoAuth, V.A.G Guided, 2 Years Free Update

👉[Powerful Diagnostics, Cheaper Spending] LAUNCH always puts users first! 2025 newest x431 scanner, LAUNCH X431 PROS ELITE, optimized hardware to provide faster & more stable diagnoses, and integrated all advantageous high-end functions to bring your repair to a new level with online coding, personalization, V.A.G guided function, all-system diagnosis, supporting CANFD & DoIP, etc. It can work on 1996-2025 cars, and it provides 2-Year NO-fee updates & 5-Year warranty. Buy with confidence!
✅[Advanced Coding, Personalize Car Needs] Based on the powerful auto diagnostic technology, LAUNCH X431 PROS Elite scanner features advanced online coding for BMW, MIMI, Citroen, Renault, Au~di, VW, Benz,etc., allowing you to replace/recode new modules. As to offline coding, this LAUNCH scan tool levels up personalized settings, such as flash auto start-stop, folding mirrors, interior lights; retrofitting new fog lights/TPMS for new enjoyment; modifying values to get more hidden functions, etc.
✅[38+ Services Do Adaptation+ Initialization + Matching] The naturally intuitive "Service Functions" menu empowers you to quickly start module services, including Oil Reset, Brake/SAS/TPMS/Battery/Tyre Reset, etc. Much more than these 38+ reset functions, go through“Vehicle Brands-Systems-Special Functions” to get an extra 100+ diagnostic functions that work on learning & matching, such as NOX Sensor Reset, Sunroof Reset, Lang Change, etc.
👍[2025 Optimized Hardware, Go Faster & Stable Efficiency] LAUNCH X431 PROS ELITE car diagnostic scanner completely upgraded its hardware with stable 2.0GHz 4-core CPU for smoother processing, extendable 4+64GB memory to save enough vehicle diagnostic data, 6000mAh battery lasting longer use time. 2.4 &5.0 GHz WiFi ensures more stable communication of vehicle data. 👉Please note, this scanner is wired for diagnostics, which ensures that your diagnostics are more stable and reliable.
✅[All-System Diagnostics & Bi-directional Control, Best Trouble-Solver] Fully meet users’ needs, LAUNCH X431 PROS ELITE scanner for car adds 1000+ active tests to pinpoint problem location, and enhances all-system diagnostic power in reading/clearing codes, viewing live data, etc. Although you can see the same slogans of these functions on other car scanners, LAUNCH definitely outperforms in vehicle coverage and accurate diagnostic results, greatly improving repair efficiency.

Bestseller No. 6

Autel MaxiCheck PRO Auto Bleed Scan Tool for ABS Brake Bleeding, OBD2 ABS SRS Diagnostic Scanner, Oil Reset, BMS, EPB, Airbag, SAS Services for Specific Vehicles Up to 2015, Lifetime Free Updates

🚦📢【NOTE: Please Check Compatibility Before Order】➊ ABS bleed works with limited Specific Vehicle models, most vehicle Year under 2015 or older vehicles, For GM, up to 2018. ➋ All the functions are Not universal for each vehicle. Please contact us to check the compatibility before ordering via 📩Autelchoice @ outlook . com📩, offer us your detail Car Model, Year, VIN# (IMPORTANT), and the functions you need, and you will get the available solution in 12 hours.
💪【ABS Auto Bleed & ABS Bi-Directional Control】Autel scanner MaxiCheck Pro allows you to check the operating conditions of the ABS Braking System, such as Automated Bleeding. ABS Brake Bleeding enables technicians and home mechanics to bleed air out of the ABS module and saves you time and money. Use this to first bleed the ABS module which will force any air into the brake lines. Then you can do a brake bleeding as usual. Note: Your vehicles must be programmed by the manufacturer to perform auto-bleed.
💪【 Hot Service Functions for Limited Vehicles】Service & Special functions such as ABS Automated Bleed, Oil Reset, ABS, SRS, EPB, SAS, BMS, Airbag are limit. Please contact us via 📩Autelchoice @ outlook . com📩 to check the compatibility before ordering by offering your detail Car Model, Year, VIN# (IMPORTANT), and the functions you need, you will get the available solution in 12 hours.
💪【ABS, SRS Diagnosis & OBD2 Function cover 10 Modes】 MaxiCheck Pro auto bleed scanner performs ABS, SRS Scan to read and clear ABS, SRS, OBDII fault codes, covers all 10 modes of OBD2 tests including read & clear codes, view freeze frame data, I/M Readiness Status(Smog Check), Component Test, O2 Monitor Test, On-Board Monitor Test, Live Data, DTC Lookup, Vehicle Info, Module Present on ALL OBD2 compliant vehicles.
💪【Lifetime Free Updates, 1-Year Warranty, 24/7 Tech Support】Customer service team is available for 24 hours and we will offer solutions or a full refund, if you need any Tech Support or After Service. NOTE: Japanese vehicles like Toyota/Honda, please check with a dealership whether your car comes with the Auto Bleeding before purchase.

Bestseller No. 7

Autel Scanner MaxiCOM MK808S: 2025 Bidirectional Tool as MK808BT Pro MX808S M808Z, Function as MaxiCheck MX900, 28+ Service, Active Test, All System Diagnose, Injector Coding, FCA Autoauth Android 11

🔥🔥🔥【2025 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2025 upgraded version of MaxiChek MX808, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective Autel scanner (without breaking the bank, same as MP900BT and MS906 PRO). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, work as MX900, MK900, MK900BT, supports 150+ car brands worldwide & FCA AutoAuth. Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including Oil Reset, SAS Calibration, ABS Bleeding, Injector Coding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2023 to 2025.
【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, provides ECU info, displays 5-in-1 Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
【AUTO SCAN & AUTOVIN, 5X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its AutoVIN technology, you can identify your vehicle's make, model, and year information with just one click. The convenient AutoScan feature automatically scans all of the vehicle's ECUs and detects any fault codes. Check AutoVIN compatibility, please contact us at 📞 MotorzoneUS @ outlook . com 📞
【WHY MK808S STANDS OUT】✅Autel's escaner automotriz professional, MK808S, provides the same funcntions as the MK808BT PRO at a lower cost. MK808S not only helps you save on subscription expenses (124.5 USD vs. 150 USD) but also ensures flawless utilization of all functions even without updates. ✅As Autel's flagship model, MK808S is the upgraded version of the old MX808 MK808BT. It covers global coverage for 150 car brands, making it a versatile and cost-effective choice.

SaleBestseller No. 8

XTOOL AD20 Pro Wireless OBD2 Scanner: 2025 Car Code Reader for iPhone & Android, All System Scan, Full OBD2 Test, Check Engine, ABS, SRS, Oil Reset, Voltage Test, Performance Test, No Subscription Fee

2025 UPGRADED XTOOL AD20 PRO WIRELESS OBD2 SCANNER: XTOOL AD20 PRO Wireless is a user-friendly and small OBD2 BT interface that turns your smartphone into a sophisticated obd2 scanner diagnostic tool and real-time car performance monitor. XTOOL AD20 Pro car scanner can perform functions like All system scan, Oil light reset, Check engine light, Turn off MIL Full OBDII Tests, Monitor car performance over time, Trip analysis & Driving behavior optimization, Battery check etc. AD20 Pro car scanner provides a low-cost & easier way for every car owners/DIYer mechanics/home user to locate the car issues before it turns to a costly trip to the dealership.
ALL SYSTEM SCAN + OIL RESET: XTOOL AD20 Pro wireless car scanner features all system scan, and helps you read/clear fault dtcs on all available systems that can’t be found on those cheap car diagnostic scanners ($30 or lower). AD20 Pro car code reader diagnostic allows you to perform all system scan to the Engine, Powertrain, Steering & Brake, SRS, ABS, TPMS, etc. AD20 Pro car diagnostic tool also comes with an oil light reset function, so you can effortlessly maintain the oil light at home to avoid rip-offs of repair shops. NOTE: Reads/clears vehicle fault DTCs only, not for reset.
EXCLUSIVE APP ADVANCER AD20: XTOOL AD20 Pro is a wireless code reader, AD20 Pro scanner for car comes with its self-developed & user-friendly APP. Downloading our exclusive APP“Advancer AD20” from G00gle Play store or App Store, you can easily customize your preferred shortcut with a customized dashboard, so, you can always focus on the most vital data intuitively.
TRACK YOUR CAR PERFORMANCE: XTOOL AD20 Pro car scanner diagnostic tool with reset also provides additional features like Performance Test + Trip Analysis. Performance Test enables you to measure datas like 100 km/h acceleration time, top speed, engine load, engine coolant temperature. Trip analysis gives you access to data like Top speed, Ave.speed, Ave fuel consumpation etc, help you monitor your car performance and optimize your driving behavior. Moreover, the smart dash function enables the wireless car scanner to turn your mobile into a digital dashboard by projecting the engine info to the windshield, ensuring your safety without looking down at the dashboard while driving.
FULL OBDII TESTS+TURN OFF THE MIL: XTOOL AD20 Pro Wireless scan tool has full OBD2 tests of read/clear vehicle fault information, Read live data stream, read freeze frame, read ECU information component test, On-broad monitor test(mode $06) O2 Sensor test, I/M readiness status, read Vehicle info, and it gives you access to vital data like engine load/rpm/fuel trims/MAF/O2 sensor/voltage, etc. It is an obd2 scanner for iphone, help you turn off the check engine light after the underlying problem addressed; Check I/M readiness status and prepare for the annual inspection; Check the depth error vehicle information definitions in depth and get idea to repair car.

Bestseller No. 9

Autel MaxiSYS MS906 PRO-TS Scanner, 2025 MS906Pro-TS Up of MP900TS MS906 Pro MP900BT MS908S, Full TPMS & ECU Coding, Bidirectional Scan Tool, 3000+ Active Test, 36+ Service, CAN FD&DoIP, Auto Scan 2.0

SaleBestseller No. 10

LAUNCH X431 PROS V+ 5.0 Elite Bidirectional Scan Tool with 2025 Newly Released DBSCar VII Connector,38+ Reset for All Cars,ECU Online Coding,CANFD,FCA AutoAuth,VAG Guide,2 Yrs F-Ree Update

【Recom-mended by YouTube Machinists】We are proud to tell that LAUNCH X431 PROS V+ 5.0 has been recom-mended as "" Per-fect Overall Car Diagnostic Scanner "" by famous editors, and also highly recom-mended by YouTube machinists.
【What Are the 2025 PROS V+ 5.0 Hardware Changes】With new in-house developed screen; 8.0 MP Pixel Rear Camera;Android 10.0 System; 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version; 4+64GB provides larger data memory; 6300mAh battery lasts 15+h work; CPU Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology;DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly
【Technology Itself is Proof of Quality】LAUNCH DBSCar VII+Self-developed screen.Using USB type A/USB type C connectors and DBSCar VII VCI connector can make the process of diagnosing and matching faster and more stable, DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. The latest self-developed screen from LAUNCH, in addition to its strong anti-fall ability, is different from other launch models in sensitivity and touch.
【2025 Newly Added CANFD】With the CANFD Connector, you can seamlessly diagnose a wider range of vehicle models (up to model year 2025, see image below for supported models) using advanced CANFD protocols. Gone are the days of being limited to certain models - now you can confidently handle the latest models, even those with the most advanced systems.
【Bi-Directional+Online Coding+Over 38 Reset Services+Adaptation+Initialization+ Matching】PROS V+ 5.0 scan tool Elite also support:K-EY programming,Gear/ SAS/ EPB/ TPMS/ BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.You can get 100+ advanced special functions under the""vehicle brand""-""menu""-""system"" - ""special functions"".

SEOCONTENT-START

Copyright 2018 General Motors eBay LLC. All Rights Reserved. Service Bulletin File in Section: 08 – Body and Accessories Bulletin No.: 11-08-49-001W Date: April, 2018 TECHNICAL Subject: Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing (Follow Procedure as Outlined Below) Models: 2011-2018 Buick Regal 2012-2017 Buick Verano 2013-2018 Buick Encore 2014-2018 Buick LaCrosse 2016-2018 Buick Cascada, Envision 2010-2016 Cadillac SRX 2013-2018 Cadillac ATS, XTS 2014-2016 Cadillac ELR 2014-2018 Cadillac CTS Sedan (VIN A) 2015-2018 Cadillac Escalade Models 2016-2018 Cadillac CT6 2017-2018 Cadillac XT5 2010 Chevrolet Camaro 2016-2018 Chevrolet Camaro 2011-2015 Chevrolet Cruze 2016-2018 Chevrolet Cruze (VIN P) 2016-2017 Chevrolet Cruze (VIN B) 2011-2018 Chevrolet Volt 2012-2014 Chevrolet Orlando (Canada) 2012-2018 Chevrolet Sonic 2013-2018 Chevrolet Spark, Trax 2014 Chevrolet Silverado 1500 2014-2016 Chevrolet Spark EV 2014-2017 Chevrolet Caprice PPV, Corvette, Impala, Chevrolet SS 2018 Chevrolet Corvette, Impala 2014-2015 Chevrolet Malibu 2016 Chevrolet Malibu Limited 2016-2018 Chevrolet Malibu (VIN Z) 2015-2018 Chevrolet City Express, Colorado, Silverado, Suburban, Tahoe 2017-2018 Chevrolet Bolt EV 2018-2019 Chevrolet Equinox 2014 GMC Sierra 1500 2015-2017 GMC Canyon, Sierra, Yukon Models, Yukon XL Models 2017-2018 GMC Acadia 2018-2019 GMC Terrain Attention: This Bulletin also applies to any of the above models that may be Export from North America vehicles. This Bulletin has been revised to add the 2018-2019 Equinox and Terrain. Please discard Corporate Bulletin Number 11-08-49-001V. Page 2 April, 2018 Bulletin No.: 11-08-49-001W Condition Some customers may comment that there is a “Transport Mode On” message displayed in the DIC and/or the red battery light is flashing. The transport mode is intended for use on vehicles being shipped over long distances, and includes vehicles shipped into and outside of the United States and Canada. Some products will be shipped from the assembly plant with the Transportation Mode On. The feature reduces the electrical load on the battery when the vehicle is parked, which extends the battery stand time. To alert the operator that the mode is on, the red battery telltale will be flashing and if equipped with a DIC, it will display a Transport Mode On message. 24 hours after transport mode is turned on, with the vehicle Off, (with exception of 2015 Full-Size SUVs equipped with RPO AVF, and continuing in later model years without AVF) the key must be used to enter the vehicle, as the following functions will be disabled: Passive Entry, Remote Keyless Entry, Content Theft. For 2015 Full-Size SUVs (Cadillac Escalade models, Chevrolet Suburban, Tahoe, GMC Yukon Models), with RPO AVF, and continuing in later model years without AVF; the Remote Keyless Entry function will remain enabled during transport mode, allowing entry without a key. Exit lighting timers will function but will be reduced. Note: For PEPS vehicles in transportation mode, the key fob will operate for the Start/Stop button, as long as the fob is inside the vehicle. When the vehicle is running, the only difference in operation will be the DIC Message and Battery Telltale on. The Passive Entry and Remote Keyless Entry functions are restored with the ignition in run. The intent of the feature is to prolong battery stand time. The mode SHOULD be left on and it is recommended to leave it on while the vehicle is in dealer inventory. Also a customer may want to use the mode if the vehicle is going to be stored. The method to turn the mode off is the same to turn the mode on. Refer to the section below for the method to turn the mode off and on. Procedure Note: Normal Vehicle Diagnostics and Service Procedures Should Not Be Performed when Transport Mode is Active. Turn Off Transport Mode Prior to Performing System Checks or Service Procedures. When the Transport Mode is on (active), enter the vehicle using the steps below. 1. Attempt to unlock the vehicle with the FOB. 2. If the vehicle is not responding to the FOB, press the PEPS door handle switch a few times (if equipped) then attempt to unlock the vehicle with the FOB. 3. If the vehicle is not responding to the FOB, the key must be used to enter the vehicle. 4. Turn the Transport Mode on/off using the appropriate procedure below. 2017-2018 Chevrolet Bolt EV To turn the Transport Mode On/Off, start the vehicle (as indicated by the green Ready light), activate the hazard flashers, press and hold the brake pedal, then press and hold the Start/Stop button at least 15 seconds. The “Transport Mode On/Off” message will appear on the DIC. Then turn the hazard flashers off. Allow the vehicle to sleep at least 2 minutes prior to restarting. 2016-2018 Buick Cascada To turn the Transport (Logistic) Mode On/Off, it will be necessary to start the engine, activate the hazard flashers, hold the ignition key in the “Start” position for 20 seconds (the engine will not be started again). The “Transport Mode On/Off” will appear on the DIC. 2016-2018 Buick Envision / 2018-2019 Chevrolet Equinox, GMC Terrain To turn the Transport Mode On/Off, it will be necessary to start the vehicle, press the brake pedal, activate the hazard flashers, hold the start button for at least 15 seconds. The Transport Mode On/Off message will be displayed on the DIC and the Battery Warning lamp will flash. 2015-2018 Chevrolet City Express Procedure To turn the Transport Mode Off, it will be necessary to remove the X51A Fuse Block — Instrument Panel Cover, push down the shorting pin and turn the ignition key 2 times to the run position without turning the vehicle on. To put the Transport Mode back on, with ignition off, remove the X51A Fuse Block — Instrument Panel Cover, pull up the shorting pin, and turn the ignition key 2 times to the run position without turning the vehicle on. Confirm by message on display. 2011-2018 Vehicle Procedure (Excluding Buick Cascada, Buick Envision, Chevrolet City Express, Chevrolet Bolt EV) To turn the Transport Mode On/Off, it will be necessary to start the vehicle, activate the hazard flashers, press the brake pedal (automatic transmission) or clutch pedal (manual transmission) then press and hold the Start/Stop button or turn the ignition key to the crank position for 15 seconds. (The engine will turn OFF on push button vehicles.) The same steps are used to turn on the feature. Note: When removing the Chevrolet SS from Transport mode, the “Service Front Camera” message may appear in the DIC, no codes are set and should appear only one time. Cycle ignition once to clear. No diagnostics or repairs are required. 2010 Chevrolet Camaro Procedure To turn the Transport Mode On/Off, it will be necessary to activate the hazard flashers, turn the ignition key to the crank position, and then hold it in the crank position for 15 seconds. The Transport Mode Off message will be displayed and the Battery light will turn off. Bulletin No.: 11-08-49-001W April, 2018 Page 3 2010 Cadillac SRX Procedure To turn the Transport Mode On/Off, it will be necessary to push and hold the Start/Stop button while the brake is applied for 15 seconds or until the Transport Mode Off message is displayed. For SRX, if Transport Mode is active, this causes the RKE system to only work when the ignition is On or the BCM is awake (approximately 20 minutes after ignition off). Note: On vehicles that are shipped from the assembly plant with the transportation mode on, turning the feature off is included in the normal PDI process time. No additional warranty claims should be submitted to disable or enable this feature.

SEOCONTENT-END

Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Buffer Copy Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Pocket Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing

MAKE	MODEL	YEAR

BUICK	CASCADA	2016-2018
BUICK	ENCORE	2013-2018
BUICK	ENVISION	2016-2018
BUICK	LACROSSE	2014-2018
BUICK	REGAL	2011-2017
BUICK	VERANO	2012-2017
CADILLAC	ATS	2013-2017
CADILLAC	CT6	2016-2017
CADILLAC	CTS	2014-2017
CADILLAC	ELR	2014-2017
CADILLAC	ESCALADE	2014-2017
CADILLAC	ESCALADE ESV	2014-2017
CADILLAC	SRX	2010-2016
CADILLAC	XT5	2017
CADILLAC	XTS	2013-2017
CHEVROLET	BOLT EV	2017-2018
CHEVROLET	CAMARO	2010, 2014-2018
CHEVROLET	CAPRICE	2014-2017
CHEVROLET	CITY EXPRESS	2015-2016
CHEVROLET	COLORADO	2015-2017
CHEVROLET	CORVETTE	2014-2017
CHEVROLET	CRUZE	2011-2018
CHEVROLET	EQUINOX	2018
CHEVROLET	EXPRESS	2015-2018
CHEVROLET	IMPALA	2014-2017
CHEVROLET	MALIBU	2014-2017
CHEVROLET	SILVERADO	2017
CHEVROLET	SILVERADO 1500	2014
CHEVROLET	SILVERADO 2500	2015-2016
CHEVROLET	SONIC	2012-2018
CHEVROLET	SPARK	2013-2015, 2018
CHEVROLET	SPARK EV	2014-2017
CHEVROLET	SS	2014-2017
CHEVROLET	SUBURBAN	2015-2017
CHEVROLET	TAHOE	2015-2017
CHEVROLET	TRAX	2013-2018
CHEVROLET	VOLT	2011-2018
GMC	ACADIA	2016-2018
GMC	CANYON	2015-2017
GMC	SIERRA	2017
GMC	SIERRA 1500	2014
GMC	SIERRA 2500	2015-2016
GMC	SIERRA DENALI	2015-2016
GMC	TERRAIN	2018
GMC	YUKON	2015-2017
GMC	YUKON XL	2015-2017

Transport Mode On Message Displayed in DIC and/or Battery Light is Flashing – Buick Cadillac Chevrolet GMC

Procedure

Summary

Summary

Summary

Summary

Summary

Summary

Summary

Summary

Summary

Summary

Leave a Comment Cancel reply