NHTSA ID Number: 10201293
Manufacturer Communication Number: PIC6439
Summary
This Preliminary information communicates a diagnostic tip to dealership technicians when diagnosing a B1517 DTC.
6 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
CHEVROLET | CORVETTE | 2014-2019 |
Condition
The reason that a vehicle has been brought into the dealership may vary widely.
Concern
During the initial diagnosis, a technician may find a B1517 set in one of the vehicles listed above.
Correction:
If a B1517 is found set in any module, or even multiple modules, dealership technicians are to first inspect the battery cable connections.
SEOCONTENT-START
Bulletin No.: PIC6439
Published date: 06/25/2021
Preliminary Information
PIC6439 Diagnostic Tip for a B1517 DTC
Models
Brand: Chevrolet
Model: Corvette
Model Years: 2014 – 2019
VIN:
from to
All All
All
All
Transmissions:
Involved Region or Country
Condition Concern Correction:
North America
The reason that a vehicle has been brought into the dealership may vary widely. During the initial
diagnosis, a technician may find a B1517 set in one of the vehicles listed above.
If a B1517 is found set in any module, or even multiple modules, dealership technicians are to
first inspect the battery cable connections. In many cases, the small black wire that connects to
the larger battery negative cable is loose or damaged. If the vehicle history is reviewed, or the
customer is further questioned, it will usually be found that a battery was recently replaced in
the vehicle. This may have been done by a tech unfamiliar with the vehicle, a different shop, or
even by the customer himself.
Closely inspect the small black wire seen in the photo below. It may be loose, rotated, or pulled
out of the actual terminal. Any loose connection or damage to this circuit may cause a B1517,
especially with a symptom 5A.
It should also be noted that this is not a manufacturing concern, but rather this issue is caused
by improper service work that was previously done on the vehicle. Resecure / repair the connection
as needed.
Version History
Version 1
Modified 06/25/2021 – Created on.
SEOCONTENT-END
1 Associated Document
Manufacturer Communications
Bulletin No.: PIC6439
Published date: 06/25/2021
MC-10201293-9999.pdf 240.888KB
SaleBestseller No. 1
ANCEL BA101 Car Battery Tester, 12V Digital Automotive Alternator Meter Diagnostic Tool,100-2000 CCA Load Capacity, Charging & Cranking Analyzer for Truck, Boat, RV, Marine Vehicle, and More
- Catch Battery Problems Early: Featured in two videos by Project Farm, a popular YouTube channel with millions of subscribers, the ANCEL BA101 helps you quickly spot battery issues before they leave you stranded. It provides easy-to-understand readings for State of Health (SOH), State of Charge (SOC), voltage, current, CCA, plus cranking and charging system tests, so you can better understand your battery and help avoid unexpected breakdowns
- Know the Real Condition: Don’t let inaccurate readings lead to costly surprises. Built with high-quality copper crocodile clips and a precision smart chip, this battery tester is designed to deliver dependable results. For the most accurate test, enter the correct battery type, rating value (such as CCA/Ah), and temperature exactly as shown on your battery label, so you get a clearer picture of your battery’s true condition
- Fast, Clear, Hassle-Free Testing: The classic black-and-white screen, adjustable contrast, and white backlight make results easy to read in bright sunlight or low-light conditions. One-handed operation keeps testing simple, while direct power from your vehicle’s battery means no charging and no internal batteries to deal with. Multi-language support makes it easier for more users to test with confidence
- Protection When Mistakes Happen: Built-in 4-in-1 protection helps guard against reverse polarity, short circuits, overcurrent, and overvoltage for safer testing, especially in tight spaces where clamp slips or wiring mistakes can happen. The 3x reinforced ABS housing adds extra durability and helps protect both the tester and your battery during everyday use
- Built for More 12V Batteries: Supporting global standards including JIS, EN, DIN, SAE, BCI, GB, CA, MCA, and IEC, this tester works with 12V batteries used in cars, trucks, boats, RVs, ATVs, lawnmowers, golf carts, and motorbikes over 30Ah. Compatible with Flooded, AGM, GEL, and EFB batteries. Not for lithium batteries, non-12V batteries (6V/8V/24V), or motorcycles below 30Ah. For 6V testing, choose BA101 Plus. For 24V testing, choose BA101 PRO
SaleBestseller No. 2
MOTOPOWER MP0515A 12V Car Battery Tester Automotive 100-2000 CCA Battery Load Tester Auto Cranking and Charging System Tester
- 🔥【A MUST HAVE TOOL IN YOUR GARAGE】 - With up-to-date testing technology, it provides a quick reading to determine whether a vehicle battery needs a jump or replacement and also the output status of the alternator. All you have to do is log in and play. Save your time and money.
- 🔥【BATTERY HEALTH CONTROL】 - Applied with the latest test algorithm, the tester will analyze the battery and get the results in seconds, including health status, charging status, internal resistance and test conclusion (mediocre, good, excellent). All types of 12V 100-2000CCA lead acid batteries can be tested.
- 🔥【START AND CHARGE SYSTEM TEST】 - Test the starting voltage of the alternator when starting the engine to see if it is low or under normal conditions. Check the continuous power of the alternator when the engine is running to see if the alternator provides adequate power to the battery and electrical system.
- 🔥【Real Time Wave Display & Data Printing】 - When you need more details about the performance of your battery or alternator when working, you can use the wave viewing function to monitor the output curve in real time. It gives you all the detailed changes of the output.
- 🔥【3 inch color LCD screen and 9 languages supported】 - The 3 inch color LCD screen (240 x 320 pixels) is user-friendly and easy to read. Give you a more comfortable viewing experience with every inspection. 9 languages supported - English, Spanish, French, German, Italian, Russian, Portuguese, Chinese and Polish.
SaleBestseller No. 3
TOPDON BT100 Car Battery Tester 12V Load Tester, 100-2000 CCA Automotive Alternator Tester Digital Auto Battery Analyzer Charging Cranking System Tester for Car Truck Motorcycle ATV SUV Boat Yacht
- [Car Battery Tester] You can easily test and inspect your 12V lead-acid battery with this TOPDON car battery tester. The SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and numerous other understandable analytical data are provided by this battery tester. It is compatible with 100-2000CCA regular flooded, AGM flat plate/spiral, EFB, and GEL for their optimum performance.
- [Wide Application] This 12V battery load tester can only be powered on once it is properly attached thanks to a safe passive testing approach. You may test the batteries of a number of vehicles, including cars, motorbikes, trucks, RVs, ATVs, SUVs, boats, yachts, lawnmowers, and even golf carts, without needing to charge the device first.
- [3 Testing Function] A battery health test will determine whether or not the battery is in excellent operating order. A cranking test will determine whether or not the electrical system has sufficient power to start the engine. Check to see that the charging current, rectifier diode, and generator are all functioning normally. This handy auto battery analyzer makes sure your summer road trips won’t end on a flat.
- [Ergonomic Features] To help you rapidly determine the health of the battery, this load battery tester is built with three different colors of LEDs. It's easy to use because it operates through a menu system. Additionally, for a reliable and secure connection during the testing process, premium-quality copper clamps have polarity reverse prevention and spark proof features.
- [Great Choice] The TOPDON BT100 is small and compact, making it simple to keep in a glove box or center console. This battery load tester's rapid and precise results will enable you to decide whether your car battery needs to be replaced or jump-started making it an excellent choice for auto shops, garages, and DIY users who frequently check batteries.
SaleBestseller No. 4
MOTOPOWER MP0514A 12V Digital Car Battery Tester Voltmeter and Charging System Analyzer with LCD Display and LED Indication - Black Rubber Paint
- Effortless Operation - Boasting a “plug-and-test” design, there's no need for complex set-up procedures. Just connect it to the battery following simple steps. Without starting the vehicle, you can read the battery status, and after starting, quickly obtain the alternator status. Whether you're a professional mechanic or an ordinary car owner, you can easily use it to quickly determine if the battery needs jump - starting, replacement, or if the alternator output is normal.
- Reliable Safety Features - Equipped with reverse connection protection and over-voltage protection functions. Even if you accidentally connect the positive and negative poles wrongly or encounter excessive voltage, it can effectively safeguard the tester and the vehicle's circuit, greatly reducing the risks caused by operational errors and making users feel more at ease.
- Precise Testing Results - Fitted with a 4-digit digital LCD display, it offers voltage testing accuracy up to 0.01 volts, providing accurate voltage readings. Additionally, it comes with 8 colored LED indicators that intuitively show the status of the battery or the alternator. The dual-indication design makes test results clear and easy to understand, offering a precise basis for judging the conditions of the battery and charging system.
- Wide Compatibility - The testing voltage range spans from 4 to 20V DC, suitable for detecting the voltage of 12V car batteries and various other devices. The 50cm long extension cable, combined with 30A alligator clips, enables convenient and flexible connections, adapting to different testing scenarios.
- Durable and Comfortable Design - The surface of the device is treated with black rubber paint, offering a comfortable hand-feel and a stable grip that's not easy to slip. Its compact design and light weight of only 150 grams make it easy to carry and store. Whether placed in the car for emergencies or in a professional toolbox, it takes up little space and ensures long-term reliability.
Bestseller No. 5
KONNWEI KW208 12V Car Battery Tester, Battery Load Tester Automotive 12V Alternator Starter Tester Digital Auto Battery Analyzer Charging Cranking System Tester for Car Truck Marine Motorcycle Boat
- 【Reliable Automotive Car Battery Tester】 KW208 is the most cost-effective battery load tester compared to other brands, it has all the functions you need and the lowest cost that you can afford. KW208 can test all 12V batteries(100-2000CCA) including regular flooded, AGM flat plate, AGM spiral or gel batteries. Provide overall analysis of batteries’ condition and help you know their status in advance before it dies. KW208 battery analyzer supports cranking and charging system tests also alternator and starter test. Conveniently store this car battery tester for batteries in your glove box or garage, ready for use whenever needed.
- 【Galvanized Alloy Battery Clips】This battery tester has updated it's clips since 2025, thanks for the galvanized alloy battery clips, it's more durable also bring lager contact when connected with battery, it greatly improved the testing accuracy(99.7%) also safer with fully wrapped material. KW208 12V battery load tester gives you reliable and overall battery parameters such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. Additionally, battery cca tester will also show you professional advice whether to replace or recharge the battery. NEW REPLACEMENT AVAILABLE FOR ANY QUALITY ISSUE.
- 【 >99.7% High Accuracy】Thanks to KW208 meter‘s powerful and smart AI chip, it provides more than 99.7% precise testing results within milliseconds, greatly improving the testing speed and testing accuracy compared to other battery testers. Besides KW208 is the only battery tester that has over 7000+ rating and is the most reliable and popular car battery tester on Amazon.
- 【Plug and Play】 KW208 12 volt battery load tester and analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and be ready to test and analyze battery. It’s that easy! Definitely KW208 is your best choice for there is no need to spend more expensive cost to purchase battery testers as their functions are the same.
- 【Starter& Alternator Tester】KW208 not only a great car battery load tester that tests batteries cranking & charging system but also can test alternator's charging and starter's cranking conditions. And it can also switch up to 8 languages for different needs.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.