NHTSA ID Number: 10205556
Manufacturer Communication Number: 21NA190
Summary
This informational bulletin provides information for dealers/technicians on Front License Plate Installation.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| GMC | BRIGHTDROP EV600 | 2022 |
Information
Front License Plate Installation
Instructions
Refer to the installation procedure below.
Note: This installation procedure should only be completed when the front license plate is ready to be installed.
1. Locate the dimples on the front fascia surface where the license plate will be installed. The front fascia has bosses that are molded into the front fascia behind these dimples, to provide support for the license plate.
2. Line up the license plate with the dimples. The dimensions for the top left dimple (1) 35 mm (1.38 in) and (2) 45 mm (1.78 in) are shown in the graphic above, and can also be used as a guide for locating the remaining dimples.
3. Drive the provided self tapping screws through the license plate and into the front fascia until the plate is secured to the front fascia. Do not over torque the screws.
SEOCONTENT-START
Service Bulletin Bulletin No.: 21-NA-190
Date: November, 2021
INFORMATION
Subject: Information on Front License Plate Installation
Brand: Model:
Model Year: VIN: Engine: Transmission:
from to from to
BrightDrop EV600 2022 2022 All All
Involved Region or Country United States and Canada only,
Information Front License Plate Installation
Instructions Refer to the installation procedure below.
Installation Procedure
5893684
Page 2 November, 2021 Bulletin No.: 21-NA-190
Note: This installation procedure should only be
completed when the front license plate is ready to be
installed.
1. Locate the dimples on the front fascia surface
where the license plate will be installed. The front
fascia has bosses that are molded into the front
fascia behind these dimples, to provide support for
the license plate.
5893689
2. Line up the license plate with the dimples. The
dimensions for the top left dimple (1) 35 mm (1.38
in) and (2) 45 mm (1.78 in) are shown in the
graphic above, and can also be used as a guide for
locating the remaining dimples.
5893690
5893692
3. Drive the provided self tapping screws through the
license plate and into the front fascia until the plate
is secured to the front fascia. Do not over torque
the screws.
Warranty Information
The labor time for installing the front license plate is
included in the PDI time.
Version 1
Modified Released November 10, 2021
SEOCONTENT-END
1 Associated Document
Manufacturer Communications
Bulletin No.: 21-NA-190
Date: November, 2021
- 【Reliable Safety with PBE & LRC Tech】Powered by ELEGRP's exclusive PBE technology, this level 2 EV charger provides reliable protection against surges, leakage, and overloads—trusted by over 300 million households since 2000. The J1772 charger features advanced LRC tech for better conductivity, cooler operation, and stable charging speed
- 【Dual Charging Model】Charging speed depends on your outlet type. Use the NEMA 6-20 plug for Level 2 240V fast charging at up to 3.84kWh (11-14 miles/hr). For slower Level 1 charging 120V, use the included 5-15 adapter, offering 1.44kWh (4-5 miles/hr)
- 【Max 25FT Reach &and IP67 Weatherproof Reliability】 Our 25FT portable cable offers the maximum length allowed by NEC safety standards for garage, wall, or outdoor use. This electric car charger is IP67 waterproof and built for cold weather, from -21°F to 121°F, including heavy rain, or snow
- 【U.S.-Based Expert Support & and 2-Year Warranty】Get real help from our U.S.-based support team, available Mon–Sat (5 AM–3 PM PT) for fast, professional assistance. Every ELEGRP charger is backed by a 2-year replacement warranty, so you can charge your vehicle with confidence
- 【Universal J1772 Compatibility】Compatible with all SAE J1772 certified EVs, BEVs, and PHEVs. For Tesla owners: a J1772-to-NACS adapter (sold separately) may be required. Please verify your car compatibility before purchase and contact our support team with any questions
- Charge with Confidence: ChargePoint builds reliable, flexible EV charging stations for home, business, and fleets. Get 24/7 support and access to hundreds of thousands of North American charging locations.
- Charge Smart: With the user-friendly ChargePoint Mobile App, you can control your electric car charger, manage reminders, connect to smart home devices, find stations, get data and charging info, and access the latest features. Note: WiFi is needed for certain functionalities and troubleshooting steps if connectivity issues arise.
- Vast Network: Wherever you go, ChargePoint’s network includes 274k+ stations across North America and Europe and 565k+ roaming partner stations.
- Safe & Durable: Rely on this UL-certified EV charger for safe home charging. It can be installed indoors or outdoors by an electrician and includes a cold-resistant cable.
- Fast & Powerful: This EV charger charges 9× faster than a 120V outlet, delivering up to 45 mi/hr., dependent upon your vehicle. It features a J1772 connector for all non-Tesla EVs and requires a 20A or 80A circuit. For Tesla EVs, this will require an adapter.
- PLUG-IN, NO ELECTRICIAN: EVIQO Level 2 EV charger with a max output of 40A on a dedicated 50A / 240V circuit fully recharges most EVs overnight. This wall-mounted plug-in model requires an EV-graded 4-prong NEMA 14-50 outlet (same style as an RV or range outlet - NOT a dryer outlet). Verify your vehicle's connector type and home electrical setup before ordering.
- J1772 CONNECTOR - NON-TESLA EVs: Electric Vehicle Charging Stations works with all North American EV and PHEV models and also functions as a Tesla Level 2 charger when used with a J1772-to-NACS adapter (not included). The fully rubberized SAE J1772 connector with a durable metal latch provides a secure, ergonomic grip.
- SMART APP CONTROL: Enhanced WiFi Antenna keeps EVIQO EV car charger level 2 online in garage & basement. Control start/stop, set 6-40A current, get reminders & track consumption/cost right in the smartphone. Smart app features require the charger to be connected to 2.4 GHz WiFi (Internet) network.
- CERTIFIED & WEATHERPROOF: UL/ETL/FCC/Energy Star certified and built into an IP66/NEMA-4 weatherproof enclosure, so this electric vehicle charging station stands up to rain, snow, heat and dust. Mainboard steel shielding protects the internals of the charger for long term use.
- NEW FLUORESCENT HOLSTER: High-visibility fluorescent holster makes plug-in and storage easy even in low-light conditions. Absorbs both natural and artificial light to store energy - just 10 minutes of charge boosts brightness by ~60%, while 3 - 4 hours of exposure delivers extended glow. Helps quickly locate the connector at night and keeps it securely stored when not in use.
- ❤ [Equipped with Nema 14-50 plug 240V, Compatible with 110-120V Nema 5-15p to 14-50r EV Adapter(Not packaged) or the other EV Adapter Cable]: Suggest install the 240V Nema 14-50 plug-in socket. [Kindly Note When Using the 5-15P Adapter]: 1. The RV Adapter cable doesn't work for EV chargers, please order the correct EV adapter cable. 2. It will become slow level 1 ev charging and some cars may drop to 12A, the max charging rate is 1.32-1.8kW(110V*12A-120V*15A).
- ❤ [Features a J1772 Connector for All North America J1772 EVs/PHEVs. For Tesla EVs/Nacs Connector Cars, This will Require an j1772 to Tesla Adapter]: Compatible with Ford
, GM, Nissan
, Audi, Kia, Honda, BMW, Kia, Hyundai, Gmc, Chevy
, etc. [Not fits for Tesla cars/Nac connector cars-Kia EV6 2025/EV9,Ariya 2025&2025 loniq 5(J1772 to Tesla adapter needed)]. [6X Faster Charging with ETL, FCC Listed, Meets the Safety Criteria Defined by: SAE J1772, UL2231-1/-2, UL 991, UL 2231, UL 2251, UL1998 and UL 2594]: Say goodbye to slow level 1 ev charger, enjoy safe charging and 6X faster charging. - ❤ [Up to 7.68kWh High Speed Charging, Adjustable Amperage from 16A to 32A & Requires a 20A to 40A circuit]: Maximum current output of 32 Amps for 40A circuit breaker, 24 Amps for 30A circuit breaker, or 16 Amps for 20A circuit breaker (Please pull out the charging gun, long press "A" button to change the current). You can also adjust the current/amperage by APP before the charging.
- ❤ [2 Operating Modes: Plug-charge(The Default Setting) or APP Start Mode & Smart Touch Screen]: The LED Screen Clearly show the Amperage, charging speed, input voltage, delay time, etc. For the touch buttons: 1. Pull out the charging gun before press the button, otherwise no respond; 2. Long press "Ⓐ" or "Time" button to adjust the amperage from 16A to 32A freely or Set the charging start time; 3. You can do "factory reset" if doesn't charging.
- ❤ [Smart WIFI APP, You can Set the Charging Period]: Check the charging cost, history, fully-charged notification, track the charging status, during off-peak period, etc. ❤ [Wi-Fi Reset/Factory Reset Function, Add New Device Quickly]: If you can't find your device or you have replaced a new phone, just pull out the charging gun, simultaneously long press the Ⓐ button and time adjustment button on the product screen until it shows "Factory Reset", then re-start your device.
- [2026 INTELLIGENT CHARGING UPGRADE — PRECISION CONTROL MEETS SMART SCHEDULING] After surveying 100K+ U.S. EV owners, the Raylix R&D team found that nearly all drivers recognized the necessity of adjustable current and scheduled charging. Our upgraded J1772 charger features 4-level adjustable current (8A/10A/12A/16A) and a 1–12 hour smart delay timer. Whether you're charging overnight or during off-peak hours, enjoy smarter energy use, lower costs, and total convenience—on your schedule.
- [ONE CHARGER, ALL J1772 EVs/PHEVs READY!] Compatible with all SAE J1772 electric vehicles and plug-in hybrids—whether it’s Ford
, GM, Nissan
, Audi, BMW, Kia, Hyundai, Honda, Chevy
, or more. Perfect for home or on-the-road charging, our 16A Level 1 & 2 charger ensures your EV is always powered and ready for any journey. - [CHARGE 4× FASTER — NO MORE WAITING] In a rush? Our 16A Level 1 & 2 charger delivers charging speeds up to 4× faster than standard 8A Charger Level 1. Whether it's an early commute, a spontaneous trip, or last-minute errands, your EV will be ready when you are.
- [LEVEL 1 & 2 PORTABLE CHARGER — CHARGE ANYWHERE, ANYTIME] Designed for maximum flexibility, Raylix Level 1 & 2 EV charger features both 5-15 and 6-20 plug compatibility. Whether you're charging in your garage, at a friend's house, or at a roadside motel. NEMA 6-20 plug for Level 2 ev charging (240V, 16A, 3.68kW, 9-12 miles/hr) and a NEMA 5-15 adapter for Level 1 ev charging (120V, 12A, 1.44kW, 3-5 miles/hr) NOTE: In compliance with North American electrical safety standards, the charger automatically limits current to 12A when using a 5-15 outlet—protecting both your vehicle and your home’s electrical system.
- [AT-A-GLANCE CHARGING COMMAND: TOTAL CONTROL, INSTANTLY] While most ev chargers solutions confine vital data to in-car screens, the Raylix tesla charger breaks free with its enhanced TFT color display. This Raylix-exclusive feature delivers crystal-clear, real-time updates—voltage, current, power load, AND critical charging temperature—directly on the unit. Just one glance gives you complete charging insight. It’s not just information; it's the empowering peace of mind and satisfying control that transforms every charge into a masterfully managed experience.
Last update on 2026-06-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





