Positive Battery Cable To Starter Too Long – 2020 Chevrolet 4500

SEOCONTENT-START

GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5580
URGENT – DISTRIBUTE IMMEDIATELY
Date: November 20, 2020
Subject: Stop Delivery Order for Upcoming Safety Recall N202323550
Battery Cable, Surge Hose and Harness Routing
Models: 2020 Chevrolet 4500 Low Cab Forward MD (17 Vehicles)
To: All General Motors Medium Duty Dealers
STOP DELIVERY ORDER
Effective immediately, stop the delivery of certain 2020 model year Chevrolet Low Cab Forward (LCF) 4500 MD vehicles in new or used vehicle inventory. Isuzu Motors has notified the National Highway Traffic Safety Administration (NHTSA) about an upcoming safety recall that involves these vehicles. The GM recall number is N202323550.
It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification until the defect is remedied.
In the affected vehicles, the first condition/defect involves the positive cable connecting the battery to the starter was too long. Depending on the installation positioning, the cable may be routed too close to the right-side exhaust pipe. Over time, heat from the exhaust pipe may cause the conduit and insulation to deteriorate, which may expose the wires and lead to the potential for a short circuit. Damage to the circuit may result in an engine no-start condition. Exposed wires could corrode and/or short circuit, resulting in a no-start condition or a thermal event, increasing the risk of a crash or fire.
The second condition/defect involves, the chassis harness and the coolant return hose from the radiator to the reservoir (surge hose) are located near the edge of the cab floor panel. During normal driving, the harness and/or hose could potentially chafe from contact with the cab floor panel. Continued chafing could cause wear in the harness and/or hose, ultimately causing a hole in the hose with the potential for engine coolant to leak and/or causing damage to the harness with the potential for a short circuit. Damage to the harness may also result in a short circuit and cause melting of the wires, engine no start, or engine stall. Damage to the harness may also result in a short circuit and cause melting of the wires, engine no start, or engine stall.
To correct this condition, dealers will add fasteners and protectors to the surge hose and chassis harness and adjust the positive battery cable.
Until further instructions are received, involved vehicles that are in dealers’ possession (new or used vehicle inventory, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc.) must be held and not delivered to customers, dealer-traded, released to auction, used for demonstration purposes or any other dealer use. All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System (CPOIS) will be de-certified.
The Investigate Vehicle History (IVH) screen in the Global Warranty Management (GWM) system has been updated for this upcoming recall today, November 20, 2020. This action has been taken to assist dealers with determining which vehicles are involved so they can properly respond to customer inquiries.
A list of involved vehicles that have been identified as being in dealer new vehicle inventory is attached to this message. It is sorted by dealer Business Associate Code (BAC) for easy reference. Your dealership’s BAC will not be listed if none of the involved vehicles are currently in your new vehicle inventory. To identify involved vehicles in dealer used inventory, run an Open VIN Report or Field Action Initiation Report using Field Action Reports-GFAM within the Maxis Dealer Application in GlobalConnect.
Until the recall bulletin is released, the Investigate Vehicle History (IVH) screen in the Global Warranty Management (GWM) system will display “N/A” under Release Date and “Incomplete – Remedy not yet available” under Status. This means the required repair is not yet available and dealers should not attempt to perform any repairs.
We are working with the supplier to obtain the required parts as quickly as possible. When a sufficient quantity of parts is available, the recall bulletin will be released, and dealers can begin repairing vehicles.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS

********************************************************************************************************************

GM CUSTOMER CARE AND AFTERSALES
DCS5603
URGENT – DISTRIBUTE IMMEDIATELY
Date: December 08, 2020
Subject: N202323550 – Safety Recall
Battery Cable, Surge Hose and Harness Routing
Application for Used Vehicle Working Capital Assistance Program (WCAP)
Models: 2020 Chevrolet 4500 Low Cab Forward MD (17 Vehicles)
To: All General Motors Medium Duty Dealers
On November 20, 2020, GM sent to all GM dealers GlobalConnect Message GCUS-3-1972 regarding safety recall N202323550.
The required repair to complete this recall is not yet available. Until further instructions are received, the involved vehicles that are in dealers’ possession (new or used vehicle inventory, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc.) must be held and cannot be delivered to customers, dealer-traded, released to auction, used for demonstration purposes or put to any other use.
This message is to inform dealers who have involved vehicles in their inventory that they can now apply for the used vehicle Working Capital Assistance Program (“WCAP”) for safety recall N202323550.
Before proceeding with the application process described below, dealers must verify vehicle eligibility based on the program terms and guidelines that were provided in GM GlobalConnect Message GCUS-9-9188 dated March 10, 2020. Applications submitted on ineligible vehicles are subject to chargeback of any incentives paid to the dealer under the WCAP. Because compensation and tracking require visibility into dealers’ inventory, dealers must also have agreed to a Dealer Data Share agreement with GM in order to receive any compensation under this program.
To apply for the WCAP for safety recall N202323550, dealers must access the GM Global Warranty Management (GWM) system and submit a “ZSET” warranty transaction using the labor code provided below for each eligible vehicle. This zero dollar special transaction type is the dealer’s application for compensation and constitutes a representation from the dealer that the vehicle is eligible for WCAP assistance.
Note: Acceptance of the warranty transaction does not ensure vehicle eligibility or guarantee the provision of any assistance as defined by program terms and guidelines.
Labor Code
Description
Labor Time
Trans Code
9800062
Working Capital Assistance for Safety Recall N202323550
N/A
ZSET
To be eligible for the WCAP, a vehicle must be in dealer inventory at the time the related field action bulletin is released. If a vehicle has been delivered, wholesaled or otherwise disposed of prior to release of the bulletin, the vehicle is not eligible for assistance. Additionally, recalled vehicles taken in on trade may be eligible for assistance if the dealer immediately reports the vehicle in used vehicle inventory via its Dealer Management System (DMS) and makes application through the GWM system.
To ensure that GM is receiving daily inventory information, which is necessary to process payments and make eligibility determinations under the WCAP, the dealer’s vehicles must be properly identified in the dealership’s DMS. A daily feed of this information is provided to GM through the Dealer Data Share (DDS) agreement.
Beginning with the 1st quarter of 2019, all WCAP payments will be facilitated through the Global Warranty Management (GWM) system. For each eligible vehicle, a qualifying dealer will submit for WCAP vehicle enrollment with a “ZSET” transaction type and for reimbursement with a “ZFAT” transaction type both through the GWM system. If approved, a WCAP credit for that vehicle will be issued through the GWM system similar to any other warranty credit. WCAP submission instructions and the required labor code will also be provided in the appropriate field action bulletin. Each WCAP transaction being credited will be clearly identified on the dealer’s daily credit memo.
In order to receive payment, a dealer must have timely reported the vehicle in used vehicle inventory, retained the vehicle until the related field action bulletin is released, and properly applied for the WCAP payment. The vehicle must also be otherwise eligible under WCAP rules and guidelines.
GM reserves the right to amend, modify, terminate, or cancel this program at any time in its sole discretion.
END OF MESSAGE GM CUSTOMER CARE AND AFTERSALES

SEOCONTENT-END