NHTSA ID Number: 10178311
Manufacturer Communication Number: PIP5732
Summary
This Preliminary information communicates to the dealer technician to replace the X2 TCM connector and the terminated leads to address DTCs after the transmission is replaced if published diagnostics does not lead to root cause of the DTCs that are setting.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| CHEVROLET | SPARK | 2014-2015 |
Parts Information
| Description | Part Number | QTY |
| Terminated Lead Type I | 13587509 | 4 |
| Terminated Lead Type II | 19301838 | 16 |
| Service Connector | 19301830 | 1 |
SEOCONTENT-START
Bulletin No.: PIP5732 Published date: 06/8/2020
Preliminary Information
PIP5732 2014 2015 Spark M4M CVT7 DTCs Setting After Transmission Replacement.
Models
| Brand: | Model: | Model Years: | VIN: | Engine: | Transmissions: | |
| from | to | |||||
| Chevrolet | Spark | 2014 – 2015 | All | All | LL0 | M4M |
| Involved Region or Country | North America |
| Additional Options (RPO) | None |
| Condition | Technician’s may find DTCs set after transmission replacement.
Research has found the most common codes that could set after transmission replacement are P0797, P0841, P0863, P0961, P0965 or P2714 but other codes may set. Note: P1790 will always set after the transmission is replaced. Please refer to SI for information on how to address this code. |
| Cause | It has been discovered that when removing the transmission connector from the transmission and temporarily relocating the wiring harness to allow removal of the transmission the TCM X2 connector may crack and cause wiring and connection
concerns. |
Correction:
Note: Do not replace the transmission for any DTCs setting right after the transmission has been replaced.
If root cause of the DTCs setting after transmission replacement is not found using SI diagnostics replace the TCM X2 connector and install all new terminated leads.
Parts Information
| Description | Part Number | QTY |
| Terminated Lead Type I | 13587509 | 4 |
| Terminated Lead Type II | 19301838 | 16 |
| Service Connector | 19301830 | 1 |
Warranty Information
For vehicles repaired under the Powertrain coverage, use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time |
| 5430880 | Connector with Leads Assembly Replacement Connector with Leads Assembly Replacement | Use published labor time. |
Version History
| Version | 1 |
| Modified | 06/08/2020 – Created on. |
SEOCONTENT-END
1 Associated Document
Manufacturer Communications
Bulletin No.: PIP5732
Published date: 06/8/2020
- 【Package Include】Offers single, double pin extractors and casting tool of different sizes to fit most terminals. 82 Pieces electrical pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 24Pcs Casing Tool and 1 Protective Case
- 【Depinning Tool with Protective Case】This terminal tool removal kit set is sharp, so we provide a protective case for you. You can keep your depinning tools in it to make it more portable and prevent children from playing with them
- 【High Quality】Our pin removal tool set is made of high-quality stainless steel and plastic with high hardness. It is not easy to deform and can be used repeatedly for a long time. The pin headers are available in different specifications and are suitable for most electronic equipment maintenance, making your work more convenient
- 【Wide Application】The terminal extractor tool kit are common tools for most connector terminals, suitable for most cars, motorcycles and other electronic devices like household appliances
- 【Easy to Use】The terminal pin removal tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage. Kindly Note: Most of the wire harnesses are held in place with barb clips. You can use a tool to lift or flatten the barbs, and then gently pull out the wire ends. Pay special attention to strength and direction
- Designed to remove wires from terminals without damage to either
- Package Dimensions: 8.636 L x 0.762 H x 11.176 W (centimeters)
- Package Weight : 0.1 pounds
- Country of Origin : China
- 【 Easy to Use 】Effortlessly removing terminal wires from the wire harness connector and adding a new wire. No need to pry open the terminals, just push and pull the terminal pins. Maintain the factory original harness and plug in your own electronic device without any damage.
- 【 Package Include 】12 pcs different types of car plug terminal extraction repair tools. Red handle for GM : Spring Loaded Tube*1, Square Blade*1, Flat Blade*2, Fork Blade*1, Screwdriver*1. Green handle for wire terminal: Tube*4, Flat Twin Blade*2. Includes a durable blow-molded case for easy storage, organization, and portability.
- 【Durable Metal Handles】 Unlike rubber handles that can become sticky with prolonged use, the metal handles maintain a clean, solid feel over time. Color-coded markings provide quick tool identification, while the compact design helps reduce hand fatigue during automotive electrical repairs.
- 【 Wide Application 】Designed to service a wide range of electrical connectors on most domestic and imported vehicles, as well as home appliances and electronic devices.
- 【High-Quality】 Made in Taiwan with durable metal construction, this terminal pin removal tool kit resists bending and deformation for safer, more reliable terminal removal. Built for long-lasting performance in automotive electrical and wiring repair tasks.
This product presentation was made with AAWP plugin.