NHTSA ID Number: 10178311
Manufacturer Communication Number: PIP5732
Summary
This Preliminary information communicates to the dealer technician to replace the X2 TCM connector and the terminated leads to address DTCs after the transmission is replaced if published diagnostics does not lead to root cause of the DTCs that are setting.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
CHEVROLET | SPARK | 2014-2015 |
Parts Information
| Description | Part Number | QTY |
| Terminated Lead Type I | 13587509 | 4 |
| Terminated Lead Type II | 19301838 | 16 |
| Service Connector | 19301830 | 1 |
SEOCONTENT-START
Bulletin No.: PIP5732 Published date: 06/8/2020
Preliminary Information
PIP5732 2014 2015 Spark M4M CVT7 DTCs Setting After Transmission Replacement.
Models
| Brand: | Model: | Model Years: | VIN: | Engine: | Transmissions: | |
| from | to | |||||
| Chevrolet |
Spark | 2014 – 2015 | All | All | LL0 | M4M |
| Involved Region or Country | North America |
| Additional Options (RPO) | None |
| Condition | Technician’s may find DTCs set after transmission replacement.
Research has found the most common codes that could set after transmission replacement are P0797, P0841, P0863, P0961, P0965 or P2714 but other codes may set. Note: P1790 will always set after the transmission is replaced. Please refer to SI for information on how to address this code. |
| Cause | It has been discovered that when removing the transmission connector from the transmission and temporarily relocating the wiring harness to allow removal of the transmission the TCM X2 connector may crack and cause wiring and connection
concerns. |
Correction:
Note: Do not replace the transmission for any DTCs setting right after the transmission has been replaced.
If root cause of the DTCs setting after transmission replacement is not found using SI diagnostics replace the TCM X2 connector and install all new terminated leads.
Parts Information
| Description | Part Number | QTY |
| Terminated Lead Type I | 13587509 | 4 |
| Terminated Lead Type II | 19301838 | 16 |
| Service Connector | 19301830 | 1 |
Warranty Information
For vehicles repaired under the Powertrain coverage, use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time |
| 5430880 | Connector with Leads Assembly Replacement Connector with Leads Assembly Replacement | Use published labor time. |
Version History
| Version | 1 |
| Modified | 06/08/2020 – Created on. |
SEOCONTENT-END
1 Associated Document
Manufacturer Communications
Bulletin No.: PIP5732
Published date: 06/8/2020
- 【Package Include】Offers single, double pin extractors and casting tool of different sizes to fit most terminals. 82 Pieces electrical pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 24Pcs Casing Tool and 1 Protective Case
- 【Depinning Tool with Protective Case】This terminal tool removal kit set is sharp, so we provide a protective case for you. You can keep your depinning tools in it to make it more portable and prevent children from playing with them
- 【High Quality】Our pin removal tool set is made of high-quality stainless steel and plastic with high hardness. It is not easy to deform and can be used repeatedly for a long time. The pin headers are available in different specifications and are suitable for most electronic equipment maintenance, making your work more convenient
- 【Wide Application】The terminal extractor tool kit are common tools for most connector terminals, suitable for most cars, motorcycles and other electronic devices like household appliances
- 【Easy to Use】The terminal pin removal tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage. Kindly Note: Most of the wire harnesses are held in place with barb clips. You can use a tool to lift or flatten the barbs, and then gently pull out the wire ends. Pay special attention to strength and direction
- 4-PIECE COLOR-CODED KIT: Includes three terminal release tools (silver, blue, red) and one black connector removal tool — each color corresponds to different terminal types for quick identification and faster repairs on automotive wiring systems
- COMPATIBLE WITH LISLE 57750: Works with conventional terminals, GM Weather-Pack, Pack-Con connectors, and many Ford
applications — covers the same range as Lisle 57750 at a fraction of the cost - DAMAGE-FREE REMOVAL: Metal prong tips precisely align with terminal release tabs to release wire connectors without bending clips, breaking housings, or damaging wire insulation — keeps connectors reusable after service
- OCTAGONAL HANDLE DESIGN: Multiple grip positions allow access in tight engine bay spaces; reinforced plastic bodies with metal working tips withstand repeated use in automotive repair, trailer wiring, and sensor connector service
- WIDE APPLICATION: Suitable for wiring harness repair, ECU sensor connectors, trailer plug replacement, and general vehicle electrical maintenance — a practical addition to any automotive toolkit for mechanics and experienced DIYers
- Designed to remove wires from terminals without damage to either
- Package Dimensions: 8.636 L x 0.762 H x 11.176 W (centimeters)
- Package Weight : 0.1 pounds
- Country of Origin : China
- Package : There are 19 pieces of single pin extractors, 2 piece of three pin extractor, 25 pieces of double pin extractors, and 12 pieces of casing tool, 60 pieces in total and protective bag.Offers single, double pin extractors and casting tool of different sizes to fit any terminal.
- Effortless Terminal Removal: The ternimal tool no need to pry the terminals! just insert our tool, push and pull the terminal pins for removal. Our tool provides extra leverage so you can easily remove the wire.
- High-Quality Material: The Pin extractor tool made of premium steel spring plate + plastic. It is flexible and durable.
- Material: Stainless Steel, Plastic.The pins terminals removal tools are made of stainless steel and plastic, the needles are steel and the width between needles can be change on your own if necessary, enjoy flexible resilience and durability
- Elelectrical Tools Wide Applications: The car-tools for most connector terminal which can be used for most cars, motorcycles and other electronic devices such as household appliances.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.