NHTSA ID Number: 10126299
Manufacturer Communication Number: PI1265
Summary
This preliminary bulletin provides a procedure on installing new steering gear dampener rings if diagnosis has found them to be the cause of the customers concern of a popping noise from the front of vehicle.
2 Affected Products
Vehicles
SEOCONTENT-START
Bulletin No.: PI1265
Date: June, 2014
| Subject: | Popping Noise Heard from Front End of Vehicle |
| Models: | 2014 Chevrolet Silverado 1500 |
| 2014 GMC Sierra 1500 |
Condition/Concern
Some customers may comment on a popping noise heard from the front of the vehicle while steering left or right, specifically near the steering gears full left or full right steering position.
This condition may be caused by the steering gear shaft dampener rings.
Recommendation/Instructions
Technicians should perform an inspection for the steering gear shaft dampener rings following the steps below.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
- Rotate the steering wheel until the power steering gear reaches its end of travel. Repeat in both directions.
If noise is detected, replace the steering gear shaft dampener rings. Refer to Steering Gear Shaft Dampener Ring Replacement in SI. If no noise is heard, pursue with further diagnosis in SI.
Parts Information
| Description | Qty | Part Number |
| RING-S/GR SHF DPNR | 2 | 23214207 |
| BOOT CLAMP | 2 | 11562064
Boot Kit Clamp
|
Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time |
| 7480108* | Steering Gear Shaft Dampener Ring Replacement – Both Sides | 1.4 hrs |
| *This is a unique Labor Operation for Bulletin use only. It will not be published in the Labor Time Guide. | ||
SEOCONTENT-END
Bulletin No.: PI1265
Date: June, 2014
To View or Download this Document Click Here
Bulletin No.: PI1265
Date: June, 2014
To View or Download this Document Click Here
- Auto & Truck Maintenance
- Country of manufacture: United States
- Manufacturer: VALVOLINE
- High quality power steering fluid and conditioner
- Stops Noise
- Stops slipping
- Helps prevent unusual wear
- Protects seals
- 50,000 mile fluid life
- Includes Stop Leak additives to prevent and stop power steering system leaks
- Anti-wear protection increases system life; protects against pump failure, squeals and clogs; corrosion protection for metals, rubber & gasket components
- Conventional formula; for use in all manufacturers
- Size: 12 oz.
- Engineered Stop Leak Protection: Specially formulated to condition and rejuvenate worn seals, helping stop existing leaks and preventing future fluid loss for smoother steering performance
- Long-term system durability: Provides advanced protection against wear and tear in the power steering system, ensuring reliable operation and extending component life under demanding conditions
- Anti-foaming and oxidation control: Reduces fluid breakdown, prevents harmful foam formation, and resists oxidation, keeping the steering system clean and responsive over time
- Seal Conditioning Benefits: Rejuvenates aged seals, restores flexibility, and helps reduce cracking or wear that commonly leads to power steering leaks.
- Recommended Applications: Suitable for ABS, disc, and drum braking systems meeting GM 1050017, Chrysler Spec 5931, and Ford Spec M2C195-A requirements
- Conditions O-rings
- Contains mild seal to help prevent small leaks
- Helps extend fluid lifeSpecifications
- Weight: 10 lbs
This product presentation was made with AAWP plugin.