NHTSA ID Number: 10161031
Manufacturer Communication Number: PIT5474C
This Preliminary Information communication provides information to the technician about vehicles that may have a Service Power Steering message, loss of power and or Malfunction Indicator Lamp on in the Instrument Panel Cluster. Technician will inspect terminals for circuits 2500 and 2501 at the transfer case control module connector, X103 and X106 for oversized or bent terminals. Technician should fix and terminal issues.
10 Affected Products
Bulletin No.: PIT5474C Published date: 05/17/2019
PIT5474C Service Engine Soon MIL on, Service Power Steering Message Loss of Assist or Loss of Power
with Multiple U-Codes Stored or C0800
Brand: Model: Model Years:
Chevrolet Colorado 2015 – 2019 All All
All All GMC Canyon 2015 – 2019
All All All All
This PI was superseded to update model years and add possible conditions. Please discard PIT5474B.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this
Condition / Concern
The customer may state there is a Service Engine Soon MIL on, a Service Power Steering message,
loss of power and/or MIL’s on in the IPC. The technician may ﬁnd codes C0800, U0073, U0102, U0109
and/or U0140 stored.
Recommendations / Instructions
Inspect terminals for circuits 2500 and 2501 at X103 and X106 and the TCCM connector X2 ( the
terminals need to be removed from X2 to test properly ) Testing for oversized or bent terminals.
Inspect Power Steering sub harness between the PSCM and X103 for damage.
Repair per eSI if there is an issue found.
For wiring repairs covered under warranty, please refer to latest version of bulletin 10-00-89- 005
for warranty information on wire/connector repairs.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition
exhibited is resolved without completing every step, the remaining steps do not need to be
Bulletin No.: PIT5474C
Published date: 05/17/2019
Bulletin No.: PIT5474
Bulletin No.: PIT5474
- Fits most Domestic and some Import vehicle models.
- Tools used to release DC wiring terminals from the harness that connect to ECUs, sensors etc., found on most late model vehicles Special Electrical / Terminal Tools, designed to remove wires from terminals without damage.
- Designed for weather pack and pack-con terminals with flat blade to open connectors and fork for ALDL connectors to access trouble codes.
- Color coded：Red handle for GM and Green for wire terminal tools.
- Package Include- This pin removal tool kit includes 12Pcs Single Pin Extractor, 20Pcs Double Pin Extractor, 1Pcs Three Pin Extractor, 6Pcs Casing Tool
- High Quality - The depinning tools are made of premium quality steel and plastic, strong and durable, would not easily get out of shape, can be used repeatedly. The O ring handle make it more safe to operate the terminal pins connectors
- Easy to Use - No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage
- Wide Application -The electrical pin removal tool kit includes 39 Pcs different types car plug terminal extraction repair tools, can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal (such as cars ,wiring harness and household appliances)
- Convenient - This set of electric pin remover tool is light weight and compact shape, coming with 3 pieces of stainless steel beaded ball chain, easy to use and carry
- ▼ Material - The pins terminals removal tools are made of stainless steel and plastic. The needles are steel and the width between needles can be change on your own if necessary, enjoy flexible resilience and durability.
- ▼ Function - The pins terminals removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, which won't cause any damage.
- ▼ Compatible - The pins terminals removal tools suitable for most connector terminal which can be used for most cars, motorcycles and other electronic devices (such as household appliances).
- ▼ Easy to operate - You don't need to pry to open terminals in your electronic device, the leverage provided with the pins removal tools can help take out the wires or add new wires with simple pull and push.
- ▼ Package including - 26 × Single Pin Extractor, 26 × Double Pin Extractor and 18 × Casing Tool.
- 【Premium Choice】- You may get 39Pcs tools in this terminal removal tool set.The Plastic Cover Handle Pin Extractor: - 12Pcs Single Pin Extractor, 12Pcs Double Pin Extractor, 12Pcs Casing Tool; Also the Car Plug Pin Removal Tool :- 1Pcs Single Pin Extractor,2Pcs Double Pin Extractor.
- 【Quality and Safety】- Made of premium quality steel spring plate. It has strong flexibility and durability. which can be used repeatedly , the O ring handle make it more safe to operate the terminal pins connectors.
- 【Easy to Operate】- Push and pull the terminal pins. It provide extra leverage that you can easily take out the wire. The connectors will be easily repaired without any damage.
- 【Wide Application】- This tool set can be widely used for most of the connector terminal removal,picker harness terminals and connector crimp pin removal (such as cars ,wiring harness and household appliances.
- 【Risk-Free Guarantee】- We provide 24-hour online customer service, please don’t hesitate to contact us if you have any questions or suggestions and we will reach you at the soonest.
- 【High quality】-New upgraded Thick terminal removal key tool, made of high-quality steel and plastic, it is flexible, durable and can be reused.
- 【Easy to use】-The car terminal removal tool can easily remove the terminal wire from the wiring harness connector and add new wires, so you can maintain the original wiring harness at the factory and insert it into your electronic equipment without causing any damage
- 【Compatible】-This tool kit is a universal tool suitable for most connector terminals. It can be used for almost all brands of cars and other electronic equipment. It is used for the removal of most connector terminals, picker harness terminals and connector crimping. Removal of pins (eg cars, wiring harnesses and household appliances)
- 【Portable】-This set of electric pin removal tools is lightweight, compact, and comes with a stainless steel beaded ball chain, easy to use and carry
- 【Product packaging】-6Pcs single needle puller, 6Pcs double-needle puller, 6Pcs cannula tool.
- It can remove a wire intact from a donor harness and add a new wire - very easily. so you can maintain the factory original harness and plug in your own electronic device without any damage.
- Update 21pcs - The tool kit is a universal tool suitable for most connector terminal, it can be used for almost all brands of cars and other electronic devices
- This item include 21 pcs different types car plug terminal extraction repair tools.
- No need to pry open the terminals, just push and pull the terminal pins. It provide extra leverage, you can easily take out the wire.
- Made of steel spring plate + plastic. It is flexible resilient and durable. If necessary, you can manually change the width of the pin, and it can be restore the original shape without be damaged.
- ★【what you get】: In this pin terminals tool kit, it include a crimper tool, as well as 21pcs terminals removal key tools which are 7pcs single pin extractor, 8pcs double pin extractor, 6pcs casing tool, they are well packed in a box, easy to carry and storage.
- ★【Durable Quality】: The crimper tool which head is made of high-quality carbon steel, strong and durable for long time use. Ergonomically designed and non-slip rubber handles are comfortable to handle. The terminal removal tools are made of steel and plastic, flexible, resilient and durable.
- ★【Pratical crimping tool】: It offers 5 different sized crimps in a tool, double-hinge mechanism that keeps the jaws parallel for a straight crimping engagement. Crimp tool works with 24-14 awg(0.35-2mm²) terminals, you can simply strip off about 3/16" of insulation from the end of the wire, then use this tool to crimp the terminal to the insulation and wire for a tight and secure connection.
- ★【Terminal Removal Tool】: These tool are used for removing terminal wires from the wire harness connector and add a new wire. Easy to install, no need to pry open the terminals, just push and pull the terminal pins. It provide extra leverage that you can easily take out the wire.
- ★【Application】: The tools set is a common tools which can be used for most cars, motorcycles, household appliances. The crimper is perfect for various pin crimping; Terminal removal tool widely be used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal.
- LETTER CODED TERMINAL REMOVAL TOOL KIT – Perfect for multiple makes and models: American, Imported and universal standard wire connections.
- WON’T BEND OR BREAK UNDER HEAVY USE - Heat treated stainless steel tips for 25 unique fittings to easily remove terminals from electrical connectors without damage to the connector or wire.
- SAVE TIME AND MONEY - Repair single wires in a harness instead of replacing expensive full wiring harnesses. Perfect for roadside emergency use as well as the professional garage.
- PROTECTS TECHNICIAN’S HANDS – Slip-on protective handle fits snuggly over each probe and provides much needed extra leverage when repairing hard to work with terminals such as pack-con and weather-pack.
- PREVENTS LOSS OF ESSENTIAL TIPS - Blow molded plastic storage case provides a sturdy protective containment and fits on any shelf or storage area.
- This kit set is designed to take out car wire terminals without damage
- Easily remove terminals without damaging connectors
- Please don't prize up the terminals with this kit, just push and pull the terminals pins
- Compatible With: Fit for Cars SUV Off-Road Pickup Truck
- Item included: 1 x 1.5mm probe, 1 x 1.2mm probe, 1 x 1.0mm probe, 2 x 0.8mm probe
- ☆ Material: Made of steel and plastic. Flexible, resilient and durable.
- ☆ Function: They can relaxing removing terminal wires from the wire harness connector and add a new wire, which will not cause any damage.
- ☆ Compatible: This tool set is a versatile tool for most connector terminals and is used in most automotive, motorcycle and other electronic devices (such as home appliances).
- ☆ Convenient: No need to pry open the terminals, only push and pull the terminal pins. It provide additional leverage, you can easily take out the wire.You can manually change the width of the pin, and it can be restore the original shape without be damaged.
- ☆ Package: 20 Pcs Double Pin Extractor, 13 Pcs Single Pin Extractor, 6 Pcs Casing Tool, 1 Pcs Three Pin Extractor, 1 Pcs Hook Pin.
Last update on 2020-10-23 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2020-10-23 / Affiliate links / Images from Amazon Product Advertising API