Exterior Lamp Condensation and Replacement Guidelines – 2019 and Prior GM Passenger Cars and Trucks

SEOCONTENT-START

Copyright 2018 General Motors LLC. All Rights Reserved.
Service Bulletin
File in Section: 08 – Body and Accessories
Bulletin No.: 01-08-42-001L
Date: December, 2018
INFORMATION
Subject: Exterior Lamp Condensation and Replacement Guidelines
Models: 2019 and Prior GM Passenger Cars and Trucks
Attention: This Bulletin also applies to any of the above models that may be Export from North America vehicles.
This Bulletin has been revised to add the 2018-2019 Model Years. Please discard Corporate Bulletin Number 01-08-42-001K.
The following information is being provided to better define the causes of condensation in exterior lamps and includes guidelines for determining the difference between a lamp with a normal atmospheric condition (condensation) and a lamp with a water leak.
Some exterior lamps, such as cornering, turn signal, backup, headlamps or tail lamps may exhibit very small droplets of water, a fine mist or white fog (condensation) on the inside of the lamp lens. This may be more noticeable on lamps with “multi-lens” designs and may be normal during certain weather conditions.
Condensation occurs when the air inside the lamp assembly, through atmospheric changes, reaches the “dew point.” When this takes place, the moisture in the air within the lamp assembly condenses, creating a fine mist or white fog on the inside surface of the lamp lens.
Most exterior lamps on General Motors vehicles use a vented design and feature a replaceable bulb assembly. They are designed to remove any accumulated moisture vapor by expelling it through a vent system. The vent system operates at all times, however, it is most effective when the lamps are ON and when the vehicle is in motion. Depending on the size, shape and location of the lamp on the vehicle, and the atmospheric conditions occurring, the amount of time required to clear the lamp may vary from 2 to 6 hours. Customers with short commutes will experience a longer time to clear the lamp.
Completely sealed headlamp assemblies (sealed beams) are still used on a limited number of models being manufactured today. These lamps require the replacement of the complete lamp assembly if a bulb filament burns out.
Condensation
2014 Sierra Headlamp, Full and Partial Examples
3789054
3789057
A Fine Mist or White Fog on the Inside Surface of the Lamp Lens Occurring After a Period of High Humidity
• May be located primarily in the lens corners (near the vents) and SHOULD NOT cover more than half the lens surface.
• The condition should clear of moisture when the vehicle is parked in a dry environment, or when the vehicle is driven with the lights ON.
• A comparison of the equivalent lamp on the opposing side of the vehicle indicates a SIMILAR performance.
If the above conditions are noted, the customer should be advised that replacement of a lamp assembly may not correct this condition.
Water Leak
2014 Acadia Tail Lamp Example
3803382
2014 Silverado Tail Lamp Example
3789062
2014 Camaro Headlamp Example
3789063
Numerous & Various Size Drops of Water Collecting on the Inside Surface of the Lamp Lens After the Vehicle Has Been Exposed to Rain or a Car Washing Environment
Important: Moisture is most noticeable during the Spring and Fall of year, due to high humidity and the large fluctuation in temperature between day and night.
Note: Any of the conditions listed below would indicate the need to service the lens or lamp assembly.
• A condition that covers more than half the surface of the lamp lens.
• An accumulation of water in the bottom of the lamp assembly.
• A condition that WON’T clear when the vehicle is parked in a dry environment, or when the vehicle is driven with the lights ON.
• A comparison of the equivalent lamp on the opposing side of the vehicle indicates a different performance.
Note: A different performance of lamps on opposite sides of a vehicle DOES NOT always indicate that one lamp is bad, and the other is normal. For example, on a cold day when the sun is hitting only one side of the vehicle, the normal condition of one side showing clear and the other showing fogging/moisture, could be misinterpreted as a bad lamp. The customer may comment that, or you may need to inquire if, the moisture “comes and goes.” Moisture “coming and going” is considered a normal condition.
If a lamp is found to be exhibiting a leak, review the most recent version of Service Bulletin 02-08-42-001 for information regarding impact damage and modification inspection.
Non-GM Headlamp, Tail Lamp and Fog Lamp Assemblies
Many companies outside of General Motors are manufacturing lamp assemblies that look very similar to original equipment. They target high volume programs like, but not limited to, Impala, Malibu, and Full Size
Truck. These lamps are most often presented by customers as holding moisture or for inoperative bulbs due to corroded electrical connections. It appears these non OE lamps get installed on vehicles as part of a collision repair. Most likely the customer has no idea they are not original equipment, as the initial appearance is generally good. Obviously, these parts are not covered by warranty. Some of the common company names seen on these lamps are Eagle Eyes and Depo.
2650251
This fog lamp was returned for retaining moisture. As you can see it is marked with the Depo brand (it is also called out on the front lens).
The most reliable way to identify a non OE part is to compare it to the replacement service part or a like vehicle. Many do have the application called out on the part with the letters GM being present. Notice that they almost never underscore it, as that would be a trademark violation. They often use substandard wiring, sockets, vent patches and unsealed connectors.
Examples of GM Trademarks
Note: The graphics below are examples of GM Trademarks that may appear on lamp assemblies.
Not all lamp assemblies currently have the trademark, however future assemblies will contain the trademark on a label affixed to the assembly.
2014 Cadillac XTS
3803767
2014 Chevrolet Silverado
3803768

#01-08-42-001K: Exterior Lamp Condensation and Replacement Guidelines – (Feb 8, 2016)

This Bulletin has been revised to add the 2016-2017 Model Years. Please discard Corporate Bulletin Number 01-08-42-001J.

The following information is being provided to better define the causes of condensation in exterior lamps and includes guidelines for determining the difference between a lamp with a normal atmospheric condition (condensation) and a lamp with a water leak.

Some exterior lamps, such as cornering, turn signal, backup, headlamps or tail lamps may exhibit very small droplets of water, a fine mist or white fog (condensation) on the inside of the lamp lens.

This may be more noticeable on lamps with “multi-lens” designs and may be normal during certain weather conditions.

Condensation occurs when the air inside the lamp assembly, through atmospheric changes, reaches the “dew point.”

When this takes place, the moisture in the air within the lamp assembly condenses, creating a fine mist or white fog on the inside surface of the lamp lens.

Most exterior lamps on General Motors vehicles use a vented design and feature a replaceable bulb assembly.

They are designed to remove any accumulated moisture vapor by expelling it through a vent system. The vent system operates at all times, however, it is most effective when the lamps are ON and when the vehicle is in motion.

Depending on the size, shape and location of the lamp on the vehicle, and the atmospheric conditions occurring, the amount of time required to clear the lamp may vary from 2 to 6 hours. Customers with short commutes will experience a longer time to clear the lamp.

Completely sealed headlamp assemblies (sealed beams) are still used on a limited number of models being manufactured today.

These lamps require the replacement of the complete lamp assembly if a bulb filament burns out.

Condensation

2014 Sierra Headlamp, Full and Partial Examples

A Fine Mist or White Fog on the Inside Surface of the Lamp Lens Occurring After a Period of High Humidity

• May be located primarily in the lens corners (near the vents) and SHOULD NOT cover more than half the lens surface.
• The condition should clear of moisture when the vehicle is parked in a dry environment, or when the vehicle is driven with the lights ON.
• A comparison of the equivalent lamp on the opposing side of the vehicle indicates a SIMILAR performance.

If the above conditions are noted, the customer should be advised that replacement of a lamp assembly may not correct this condition.

Water Leak

2014 Acadia Tail Lamp Example

2014 Silverado Tail Lamp Example

2014 Camaro Headlamp Example

Numerous & Various Size Drops of Water Collecting on the Inside Surface of the Lamp Lens After the Vehicle Has Been Exposed to Rain or a Car Washing Environment

Important: Moisture is most noticeable during the Spring and Fall of year, due to high humidity and the large fluctuation in temperature between day and night.

Note: Any of the conditions listed below would indicate the need to service the lens or lamp assembly.

• A condition that covers more than half the surface of the lamp lens.
• An accumulation of water in the bottom of the lamp assembly.
• A condition that WON’T clear when the vehicle is parked in a dry environment, or when the vehicle is driven with the lights ON.
• A comparison of the equivalent lamp on the opposing side of the vehicle indicates a different performance.

Note: A different performance of lamps on opposite sides of a vehicle DOES NOT always indicate that one lamp is bad, and the other is normal. For example, on a cold day when the sun is hitting only one side of the vehicle, the normal condition of one side showing clear and the other showing fogging/moisture, could be misinterpreted as a bad lamp. The customer may comment that, or you may need to inquire if, the moisture “comes and goes.” Moisture “coming and going” is considered a normal condition.

If a lamp is found to be exhibiting a leak, review the most recent version of Service Bulletin 02-08-42-001 for information regarding impact damage and modification inspection.

Non-GM Headlamp, Tail Lamp and Fog Lamp Assemblies

Many companies outside of General Motors are manufacturing lamp assemblies that look very similar to original equipment. They target high volume programs like, but not limited to, Impala, Malibu, and Full Size Truck. These lamps are most often presented by customers as holding moisture or for inoperative bulbs due to corroded electrical connections. It appears these non OE lamps get installed on vehicles as part of a collision repair. Most likely the customer has no idea they are not original equipment, as the initial appearance is generally good. Obviously, these parts are not covered by warranty. Some of the common company names seen on these lamps are Eagle Eyes and Depo.

This fog lamp was returned for retaining moisture. As you can see it is marked with the Depo brand (it is also called out on the front lens).

The most reliable way to identify a non OE part is to compare it to the replacement service part or a like vehicle. Many do have the application called out on the part with the letters GM being present. Notice that they almost never underscore it, as that would be a trademark violation. They often use substandard wiring, sockets, vent patches and unsealed connectors.

Examples of GM Trademarks

Note: The graphics below are examples of GM Trademarks that may appear on lamp assemblies. Not all lamp assemblies currently have the trademark, however future assemblies will contain the trademark on a label affixed to the assembly.

2014 Cadillac XTS

2014 Chevrolet Silverado

SEOCONTENT-END

SaleBestseller No. 1

PHILIPS - 12362B2 H11 Standard Halogen Replacement Headlight Bulb, 2 Pack

• Original Equipment Quality Seal For The Most Reliable Performance
• Always Replace In Pairs To Ensure A Symmetric Light Beam From Both Bulbs On The Road. Headlights Dim Over Time
• Significantly whiter light to improve comfort and safety
• When Installing A New Bulb, Never Touch The Glass. Either Use Gloves Or Paper Towel When Handling
• When using the Amazon part finder, be sure to confirm the POSITION and NOTES provided. For some vehicles, bulbs may fit some positions (fog light, low beam, high beam, or high/low beam), but not all. The POSITION and NOTES ensure Exact Fit!

$29.99 −$13.19 $16.80

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 2

Philips Automotive Lighting H7 VisionPlus Upgrade Automotive Replacement Headlight Bulb with up to 60% More Vision, Fits Select High Beam, Low Beam, or Fog Positions (Pack of 2)

• HIGH PERFORMANCE AND VALUE: The performance choice for safety-conscious drivers, VisionPlus headlight bulbs offer high-performance and excellent value. VisionPlus is the right choice for today's demanding drivers.
• UP TO 60% MORE VISION FOR A SAFER DRIVE: Philips VisionPlus headlights produce up to 60% more vision,* which allows drivers to see father for greater safety and comfort. *Compared to standard minimum legal requirements in low beam tests results.
• OEM QUALITY AND DOT COMPLIANT: VIsionPlus bulbs meet the Department of Transportation requirements. Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.
• CONFIRM FIT: When using the Amazon part finder, be sure to confirm the POSITION and NOTES provided. For some vehicles, bulbs may fit some positions (fog light, low beam, high beam, or high/low beam), but not all. The POSITION and NOTES ensure Exact Fit! AVAILABLE IN: 9003, 9004, 9005, 9006, 9007, 9008/H13, H1, H3, H7, H11
• ALWAYS REPLACE IN PAIRS: At the end of their life, lamps project less light, therefore reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.

$24.85

Buy on Amazon Price incl. tax, excl. shipping

SaleBestseller No. 3

SYLVANIA - H11 XtraVision - High Performance Halogen Headlight Bulb, High Beam, Low Beam and Fog Replacement Bulb (Contains 2 Bulbs)

• Compatibility: Please input your vehicle into the Amazon parts finder to ensure this bulb fits the lighting location you need
• Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind. Replace your H11 XtraVision Halogen bulbs in pairs for optimum performance.
• More Downroad Visibility: XtraVision bulbs have an enhanced downroad visibility with no added glare.
• Reliable Design For Optimal Performance: XtraVision bulbs have a robust filament design and propriety gas mixture that can be driven for superior performance.
• Manufactured To Be Durable: XtraVision bulbs are designed and manufactured to improve your driving situation while providing maximum durability.

$34.99 −$11.24 $23.75

Buy on Amazon Price incl. tax, excl. shipping

SaleBestseller No. 4

SYLVANIA - 9005 XtraVision Halogen Headlight Bulb - High-Performance Car Headlight - Halogen Light with No Glare - For Automotive - 2 Bulbs

• Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind. Replace your 9005 XtraVision Halogen bulbs in pairs for optimum performance
• Vehicle Fitment: Please check to ensure 9005 bulbs fit the desired location of your vehicle
• More Downroad Visibility: XtraVision bulbs have an enhanced downroad visibility with no added glare
• Reliable Design For Optimal Performance: XtraVision bulbs have a robust filament design and propriety gas mixture that can be driven for superior performance
• Manufactured To Be Durable: XtraVision bulbs are designed and manufactured to improve your driving situation while providing maximum durability

$34.99 −$14.24 $20.75

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 5

Philips Automotive Lighting 9005 VisionPlus Upgrade Automotive Replacement Headlight Bulb with up to 60% More Vision, Fits Select High Beam, Low Beam, or Fog Positions (Pack of 2)

• HIGH PERFORMANCE AND VALUE: The performance choice for safety-conscious drivers, VisionPlus headlight bulbs offer high-performance and excellent value. VisionPlus is the right choice for today's demanding drivers.
• UP TO 60% MORE VISION FOR A SAFER DRIVE: Philips VisionPlus headlights produce up to 60% more vision,* which allows drivers to see father for greater safety and comfort. *Compared to standard minimum legal requirements in low beam tests results.
• OEM QUALITY AND DOT COMPLIANT: VIsionPlus bulbs meet the Department of Transportation requirements. Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.
• CONFIRM FIT: When using the Amazon part finder, be sure to confirm the POSITION and NOTES provided. For some vehicles, bulbs may fit some positions (fog light, low beam, high beam, or high/low beam), but not all. The POSITION and NOTES ensure Exact Fit! AVAILABLE IN: 9003, 9004, 9005, 9006, 9007, 9008/H13, H1, H3, H7, H11
• ALWAYS REPLACE IN PAIRS: At the end of their life, lamps project less light, therefore reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.

$24.95

Buy on Amazon Price incl. tax, excl. shipping

SaleBestseller No. 6

SYLVANIA - 9007 XtraVision - High Performance Halogen Headlight Bulb, High Beam, Low Beam and Fog Replacement Bulb (Contains 2 Bulbs)

• Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind. Replace your 9007 XtraVision Halogen bulbs in pairs for optimum performance.
• More Downroad Visibility: XtraVision bulbs have an enhanced downroad visibility with no added glare.
• Reliable Design For Optimal Performance: XtraVision bulbs have a robust filament design and propriety gas mixture that can be driven for superior performance.
• Manufactured To Be Durable: XtraVision bulbs are designed and manufactured to improve your driving situation while providing maximum durability.
• The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.

$34.99 −$16.00 $18.99

Buy on Amazon Price incl. tax, excl. shipping

SaleBestseller No. 7

headlight%20bulb%20automotive" title="Philips Automotive Lighting H11 VisionPlus Upgrade Automotive Replacement Headlight Bulb with up to 60% More Vision, for High Beam, Low Beam, and Fog Positions (Pack of 2)" rel="nofollow noopener sponsored" target="_blank"> Philips Automotive Lighting H11 VisionPlus Upgrade Automotive Replacement Headlight Bulb with up to 60% More Vision, for High Beam, Low Beam, and Fog Positions (Pack of 2)

• HIGH PERFORMANCE AND VALUE: The performance choice for safety-conscious drivers, VisionPlus headlight bulbs offer high-performance and excellent value. VisionPlus is the right choice for today's demanding drivers.
• UP TO 60% MORE VISION FOR A SAFER DRIVE: Philips VisionPlus headlights produce up to 60% more vision,* which allows drivers to see father for greater safety and comfort. *Compared to standard minimum legal requirements in low beam tests results.
• OEM QUALITY AND DOT COMPLIANT: VIsionPlus bulbs meet the Department of Transportation requirements. Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.
• CONFIRM FIT: When using the Amazon part finder, be sure to confirm the POSITION and NOTES provided. For some vehicles, bulbs may fit some positions (fog light, low beam, high beam, or high/low beam), but not all. The POSITION and NOTES ensure Exact Fit! AVAILABLE IN: 9003, 9004, 9005, 9006, 9007, 9008/H13, H1, H3, H7, H11
• ALWAYS REPLACE IN PAIRS: At the end of their life, lamps project less light, therefore reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.

$37.09 −$5.86 $31.23

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 8

Philips Automotive Lighting 9003 VisionPlus Upgrade Automotive Replacement Headlight Bulb with up to 60% More Vision, Fits Select High Beam, Low Beam, or Fog Positions (Pack of 2)

• HIGH PERFORMANCE AND VALUE: The performance choice for safety-conscious drivers, VisionPlus headlight bulbs offer high-performance and excellent value. VisionPlus is the right choice for today's demanding drivers.
• UP TO 60% MORE VISION FOR A SAFER DRIVE: Philips VisionPlus headlights produce up to 60% more vision,* which allows drivers to see father for greater safety and comfort. *Compared to standard minimum legal requirements in low beam tests results.
• OEM QUALITY AND DOT COMPLIANT: VIsionPlus bulbs meet the Department of Transportation requirements. Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.
• CONFIRM FIT: When using the Amazon part finder, be sure to confirm the POSITION and NOTES provided. For some vehicles, bulbs may fit some positions (fog light, low beam, high beam, or high/low beam), but not all. The POSITION and NOTES ensure Exact Fit! AVAILABLE IN: 9003, 9004, 9005, 9006, 9007, 9008/H13, H1, H3, H7, H11
• ALWAYS REPLACE IN PAIRS: At the end of their life, lamps project less light, therefore reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.

$25.29

Buy on Amazon Price incl. tax, excl. shipping

SaleBestseller No. 9

Philips Automotive Lighting 9003 CrystalVision Platinum Upgrade Automotive Replacement Bright White Headlight Bulb with Up to 60% more Vision, Fits Select High Beam, Low Beam, Fog Positions (2 Pack)

• BRIGHT AND STYLISH: Philips CrystalVision platinum premium upgrade headlight bulbs deliver a sharp, irresistible look. A new patented, ultra-white gradient coating creates up to 4000 K white light.
• UP TO 60% MORE VISION FOR A SAFER DRIVE: Philips CrystalVision platinum headlights produce up to 60% more vision,* which allows drivers to see father for greater safety and comfort. *Compared to standard minimum legal requirements in low beam tests results.
• OEM QUALITY AND DOT COMPLIANT: CrystalVision Platinum bulbs meet the Department of Transportation requirements. Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.
• CONFIRM FIT: When using the Amazon part finder, be sure to confirm the POSITION and NOTES provided. For some vehicles, bulbs may fit some positions (fog light, low beam, high beam, or high/low beam), but not all. The POSITION and NOTES ensure Exact Fit! AVAILABLE IN: 9003, 9004, 9005, 9005XS, 9006, 9006XS, 9007, 9008, 9012, 9145, H1, H3, H7, H11, H11B, PS24WFF, PSX24W
• ALWAYS REPLACE IN PAIRS: At the end of their life, lamps project less light, therefore reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.

$36.26 −$14.43 $21.83

Buy on Amazon Price incl. tax, excl. shipping

SaleBestseller No. 10

Philips Automotive Lighting H7 Standard Halogen Replacement Headlight Bulb, 2 Pack, white

• original equipment quality seal for the most reliable performance
• always replace in pairs to ensure a symmetric light beam from both bulbs on the road. headlights dim over time.
• headlight bulbs by philips, for over 100 years we have been continuously innovating automotive lighting
• when installing a new bulb, never touch the glass. either use gloves or paper towel when handling.
• Fit type: Vehicle Specific

$14.96 −$1.51 $13.45

Buy on Amazon Price incl. tax, excl. shipping

Last update on 2025-04-16 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.