“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10115070
Manufacturer Communication Number: PIT5433A
Summary
This Preliminary Information communication provides information to the technician about vehicles that have left or right front floor carpet is wet. Technician will pull back carpet on right floor from kick panel and water test. If the leak is found to be coming from the seam at the right front kick panel it will be necessary to remove the right front fender to gain access to the vertical cowl seam that is leaking. To repair, apply clear flow-able seam sealer to the cowl seam and into the pocket.
3 Affected Products
Parts
Description | Quantity/ Vehicle | Part Number |
HIGH-TECH CLEAR SEAM SEALER (5 OZ. Tube) (Obtain from Kent Automotive) | 1 Application Per Tube | P10200 |
SEOCONTENT-START
Bulletin No.: PIT5433A
Date: Jun-2015
Subject: | Front Floor Carpet Wet |
Models: | 2015 Chevrolet Silverado 1500 |
2015 GMC Sierra 1500 | |
Built after 3/1/2015 |
This PI was superseded to update Recommendation/Instructions. Please discard PIT5433.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern
Some customers may comment the left or right front floor carpet is wet.
Recommendation/Instructions
Pull back carpet on affected side (left or right) at kick panel and water test. If the leak is found to be coming from the seam (1) at the front kick panel (right side
shown below – left side similar) it will be necessary to remove the front fender to gain access to the vertical cowl seam (2) that is leaking.
To repair, apply clear flowable seam sealer to the cowl seam (3) and into the pocket (4 & 5) as shown below (right side shown below – left side similar).
Parts Information
Part Number | Description | Quantity/ Vehicle |
P10200 | HIGH-TECH CLEAR SEAM SEALER (5 OZ. Tube) (Obtain from Kent Automotive) | 1 Application Per Tube |
Contact Kent Automotive at 1-888-937-5368 or www.kent-automotive.com. |
Warranty Information
For vehicles repaired under warranty use:
Labor Operation | Description | Labor Time |
2080558* | Seal Cowl Body Seam and Water Test | 2.5 hr |
* This is an unique labor operation for bulletin use only. |
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
SEOCONTENT-END
Bulletin No.: PIT5433A
Date: Jun-2015
https://www.nhtsa.gov/recalls?nhtsaId=10115070
https://static.nhtsa.gov/odi/tsbs/2015/MC-10115070-9999.pdf
To View or Download this Document Click Here
Bulletin No.: PIT5433
Date: Jun-2015
https://www.nhtsa.gov/recalls?nhtsaId=10115058
https://static.nhtsa.gov/odi/tsbs/2015/MC-10115058-9999.pdf
To View or Download this Document Click Here
- Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV
- Complete Kit –– Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
- Permanently Fill Gaps –– Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
- Primer and Paint Ready –– Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in
- All-Weather Performance –– High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
- For professional use only – not for retail sale
- Fast curing and skins over quickly—can be painted 60 minutes after application
- Can be used for all sealing and adhesive applications with a standard caulking gun in both vertical and horizontal joints
- Flexible, non-staining, and non-sagging product that will not crack or shrink
- Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV
- 2 Pack Value & Complete Kit - Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
- Permanently Fill Gaps - Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
- Primer and Paint Ready - Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in
- All-Weather Performance - High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
- SINGLE COMPONENT FORMULA: Adheres well to bare metal, primed metal and painted surfaces
- MOISTURE CURING PROPERTY: Provides excellent performance in high heat and humidity environments
- NON-SHRINKING, NON-CRACKING: Remains flexible and offers superior results to solvent-based sealers
- QUICK PAINTABILITY: Allows painting after 30-45 minutes
- THICK CONSISTENCY: Fills large voids and can be smoothed to a featheredge or brushed
- EASY APPLICATIONS: Brushable and paintable consistency
- HIGH ADHESION: Works on both bare metal and painted surfaces
- FAST SKINNING: Starts in about 10 to 15 minutes
- STAYS IN PLACE: Less likely to drip, sag or run out of gaps being sealed
- NON-STAINING: For all-purpose autobody joint and seam sealing
- Brushable Seam Sealer is fast drying and designed exclusively for automotive uses.
- This product remains flexible and will not crack, harden, sink or sag.
- Brushable Seam Sealer is easily applied with a brush and holds a perfect brush mark to match that O.E.M. seam.
- It provides excellent adhesion, seals cracks, crevices, body seams and is ideal for use on all lap and flange seams and joints.
- Brushable Seam Sealer is paintable in 30 to 60 minutes and comes in a light gray color.
- HIGH-PERFORMANCE: Two-part epoxy seals vertical and horizontal seams to match OEM seals
- METERED MIXING: Dual syringe cartridge eliminates the difficulty and mess of manual mixing
- NON-FLOWING: Heavy-bodied formula allows easy tooling for matching OEM seam sealer appearances
- QUICK CURE: Non-sag property aids during vertical applications
- SELF-MIXES: Makes a perfect formulation every time without mess
- Seal seams and permanently repair holes in tents, tarps, awnings, rainflys and camping gear like Thermarest sleeping pads
- Treat up to up to 12’ of seams (1 oz) or repair torn outdoor fabrics with an adhesive that cures into a flexible rubber seal; also available in an 8 oz tube
- Waterproof gear with a sealant that flexes with fabric and bonds to nylon, polyester, canvas, leather and vinyl
- Apply it to repair or re-proof gear without worrying about the seal peeling or cracking; includes two applicator brushes
- Packaging may vary
- Seal up to 60 ft of seams on tents, tarps and awnings with this water-based seam sealant; cures in 2 hours at room temperature
- Use it on various outdoor fabrics including nylon, polyester, and canvas; previously known as Seam Sure
- Apply this long-lasting seal that is nearly invisible and flexes with fabric; available in 2 fl oz bottle
- Treat gear using the included applicator brush to make application quick and easy
- Packaging may vary
- Vehicle Body Repair: Automotive Seam Sealer for all-purpose auto body gap filling,joint and seam sealing.Protect your vehicle from rust and corrosion with these automotive seam sealers.Ideal for car ,truck, boat, RVs.
- High Adhesive & Durable - designed this urethane sealer for a range of materials, including bare metal or painted surfaces.
- Don't Shrink and Crack - low odor single component formula auto seam sealer provides flexible,non-staining, and non-sagging.
- Easy to Use - Fast cure time.You can paint over the undercoating . For best results, allow 24 hours and scuff before painting.
- Water and Corrosion Proof - Use interior or exterior to prevent weather from eroding your car.Service Temperature -40 to 170 °F (-40 to 77 °C).High heat performance.
Last update on 2024-04-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.