| Opel / Vauxhall | Adam | 2015 | 2015 | 1.2L (LWD) A/B12XEL, 1.4L (L2Z) A14XEL, 1.4L (LDD) B14 XEL, 1.4L (LDD) A/B14XER, 1.4L (LUJ) B14NEH | F17 (MDG), F17–MTA (MJA), M32 (MZ0) | ||
| Opel / Vauxhall | Astra-J | 2015 | 2015 | 1.4L (LDD) A/B14XER, 1.4L (LUJ) A/B14NEL, 1.4L (LUJ) A/B14NET | F17 (MDG), F17 (M26), M32 (MZ4), 6T-40 (MH8) | ||
| Opel / Vauxhall | Cascada | 2015 | 2015 | 1.4L (LUJ) A14NEL, 1.4L (LUJ) A14NET | M32 (MR5) | ||
| Opel / Vauxhall | Corsa-D | 2015 | 2015 | 1.2L (LWD) A12XEL, 1.2L (LDC) A12XER, 1.4L (L2Z) A14XEL, 1.4L (LUH) A14NEL, 1.4L (LDD) A14XER | F13 (ML5), F13-MTA (MV4), F17 (M26), F17 (M25), AF13 (MC7) | ||
| Chevrolet | Cruze | 2015 | 2015 | 1.4L (LUJ) A/B/U14NET | 6T40 (MH8), M32 (MZ4) | ||
| Opel / Vauxhall | Insignia | 2015 | 2015 | 1.4L (LUJ) A/B14NET | M32 (MR5), M32 (MZ4) | ||
| Opel / Vauxhall | Meriva-B | 2015 | 2015 | 1.4L (LDD) A/B14XER, 1.4L (LUH) A/B14NEL, 1.4L (LUJ) A/B14NET | F13 (MPW), F17 (M26), M32 (MZ0), AF 40 (MDK) | ||
| Opel / Vauxhall | Mokka | 2015 | 2015 | 1.4L (LUJ) A/B1 NET | M32 (MR5), M32 (M7Y), 6T-40 (MH8) | ||
| Chevrolet | Sonic | 2015 | 2015 | 1.4L (LDD) A14XER, 1.4L (LUJ) A14NEL, 1.4L (LUJ) A14NET | F17 (M26), M32 (MR5), 6T30 (MH9), 6T40 (MH8) |
Engine oil leak from the rear of the engine, coming from the transmission flex plate or flywheel bolts due to the crankshaft threads being improperly drilled.
Not complete circumference of threads at the crankshaft
Correction
In case of a complaint with engine oil leak at transmission side, follow the working procedure
Working Procedure:
- Remove the automatic transmission flex plate or engine flywheel.
- Inspect the 6 crankshaft threaded bores (1)
Note: If the threads are incorrect, there will be oil present on the bolts’ threads and mating surface to the flywheel or flex plate
- Threads on the left of the image have the complete circumference of threads and is NOT the root cause of the oil leak
- Threads on right of the image have the partially, not complete circumference of threads and is most likely the root cause of the oil leak.
- If all of the threads in the bore are correct, do not use this procedure because this is not the root cause of the oil leak, continue diagnoses of the origins of the oil leak.
- Remove residuals of self-locking compound from the affected threads.
- Clean all 6 crankshaft bores with Brake Cleaner or equivalent.
- Before reinstalling the flex plate or flywheel, apply Sealant P/N 90297970/15 03 167 (Loctite 518) (3) in addition to existing self locking compound to the 6 bolts as illustrated below.
Note: Do NOT replace the clutch pressure and driven plate if it is not oil contaminated.
- Ensure to cover 4-5 threads (1) of the bolt before the pre-applied thread lock and cover 1-2 threads (2) of the pre-applied thread lock.
- Install the automatic transmission flex plate or engine flywheel
Note: Ensure to use NEW bolts
| Bolt, AT Flexplate or SMF | 55571538
General Motors 55571538, Clutch Flywheel Bolt
| 6 16 083 | 6 |
| Bolt, Dual mass flywheel | 93186900 | 6 16 960 | 6 |
| Sealant | 90297970 | 15 03 167 | 1 |
OEM product
SaleBestseller No. 1
Loctite Threadlocker Blue 242 - Removable Thread Lock Glue for Nuts, Bolts, & Fasteners, Medium Strength Screw Glue to Prevent Loosening & Corrosion - 6 ml, 1 Pack
- Lock and Seal Fasteners: Prevents loosening of metal fasteners caused by vibration on small motors, mowers, and power equipment
- Prevents Rust and Corrosion: Protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers
- Removable: Can be removed with hand tools
- Easy and Quick: Sets in 10 minutes and fully cures in 24 hours
- For 6-19mm Fasteners: Medium-strength formula for use on threads for 6mm to 19mm nuts and bolts
Bestseller No. 2
Thread Lock Blue and Red, Threadlocker Medium and High Strength, Thread Locker for Nuts, Bolts, Fasteners and Metals, Against Losening and Leakage (50 mlx2)
- Threadlocker: Thread locker has strong adhesion and can fix screws, nuts, and metal fasteners to prevent loosening due to vibration
- Sealing and leakage prevention: Using thread locker cores instead of solid gaskets, close contact, perfect sealing, and effective leakage prevention
- Prevents Rust and Corrosion: Protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers
- Easy to use: Simply apply the threadlocker evenly to the thread, tighten the nut, and cure initially for 20 minutes, then fully cure within 24 hours
- Wide application: Whether you're installing a valve cover, water pump, or just tightening down some furniture screws, blue threadlocker has you covered. Our screw glue can be used on a variety of automotive, industrial and furniture applications
Bestseller No. 3
GH1200-6gx2 Pack Thread Lock Medium and Strong Strength for Nuts, Bolts, and Metals, Threadlocker Lock Tight & Seal Fasteners with Stable and Consistent Performance
- ELIMINATE SPILLS WITH PATIENCE: GH1200 thread lock gives you the luxury to get rid of messy spills and wasted time cleaning up after unreliable applicators. Our product features a robust, precision-engineered nozzle that ensures a clean, controlled application, preventing leaks. keep your project area spotless with our Seal Fasteners threadlocker.
- STOP LEAKS AND FRUSTRATION: Our Seal Fasteners thread locker saves you from leaky valves, drips from loose water pumps & loose bolts in machinery. Our threadlocker forms a secure, long-lasting bond that prevents leaks, vibrations, and loosening. Keep your projects secure and frustration-free with GH1200 thread locker.
- NEVER RUN OUT: This convenient pack of threadlock provides high strength.The threadlocker offer the perfect solution for all your fastening needs. you'll have plenty on hand for various projects without worrying about running out anytime soon.
- SECURE PROJECTS FOR LONG HAUL: Our thread lock creates a powerful bond. The screw lock prevents loosening,. even under heavy loads and frequent use. Our thread lock gives you the peace of mind knowing your projects are built to last, without the constant worry of parts coming loose.
- VERSATILITY YOU CAN COUNT ON: From intricate automotive components to everyday household repairs our liquid thread lock is your one-stop solution for a wide range of applications. The fast-curing formula of thread lock works effectively on all types of fasteners, metals, and threaded connections. GH1200 thread locker automotive is the perfect addition to any toolbox.
Bestseller No. 4
Loctite 1329467 243 Blue Medium Strength Threadlockers, 1.69 Ounces, 50 mL, 3/4" Thread
- Size: 50 ml
- Color: Blue
- Characteristic odor
- A general-purpose, medium-strength threadlocker with improved oil tolerance
- Oil-tolerant curing on as-received fasteners without cleaning
Bestseller No. 5
Permatex 24200 Medium Strength Threadlocker Blue, 6 ml, Automotive Threadlocker For Preventing Bolts From Loosening And Corrosion, Removable With Hand Tools
- Locks And Seals While Preventing Parts Loosening Due To Vibration
- Protects Threads From Corrosion
- Ideal For All Nut And Bolt Applications 1/4" To 3/4" (6Mm To 20Mm)
- Removable With Hand Tools For Easy Disassembly
This product presentation was made with AAWP plugin.