NHTSA ID Number: 10201130
Manufacturer Communication Number: PI1478A
Summary
information on Installation of Stage One and Two Rear Wicker Bills on Spoiler
During the installation of the rear wicker bills that are fastened on the rear spoiler, some technicians may revert to the use of power tools to tighten the fasteners.
The use of power tools should not be used due to the fact that this could lead to damage to the fasteners and/or the spoiler.
When installing the wicker bills onto the vehicle, it is recommended to hand start the fasteners before using the correct hand tools to torque the fasteners to the proper torque specifications.
SEOCONTENT-START
Bulletin No.: PI1478A Date: Dec-2015 Subject: Information on Installation of Stage One and Two Rear Wicker Bills on Spoiler Models: 2015-2016 Chevrolet
Corvette Equipped with RPO CFV or CFZ Attention: This PI also applies to any of the above models that may be Europe, Japan and Middle East Export vehicles. This PI has been revised to add the 2016 Model Year. Please discard PI1478. During the installation of the rear wicker bills that are fastened on the rear spoiler, some technicians may revert to the use of power tools to tighten the fasteners. 1 The use of power tools should not be used due to the fact that this could lead to damage to the fasteners and/or the spoiler. When installing the wicker bills onto the vehicle, it is recommended to hand start the fasteners before using the correct hand tools to torque the fasteners to the proper torque specifications. Damage to the fasteners or the spoiler should not be submitted under warranty as the parts are dealer installed components during the pre-delivery process.
SEOCONTENT-END
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| CHEVROLET | CORVETTE | 2015-2016 |
1 Associated Document
Manufacturer Communications
Bulletin No.: PI1478A
Date: Dec-2015
MC-10201130-9999.pdf 175.016KB
- ★Adaptation: This Trunk Spoiler For 2005 2006 2007 2008 2009 2010 2011 2012 2013 Chevy Corvette C6.
- ★Material: Our Corvette C6 spoiler is made of light weight and durable ABS plastic material, has excellent impact resistance, heat resistance, and low-temperature resistance. Streamlined and lightweight design with low noise.
- ★Function: Corvette rear spoiler wing reduces wind resistance at high speeds, improves the stability and grip of your car, reduces fuel consumption, and provides you with a better driving experience.
- ★Installation: The rear spoiler easy to assemble and remove in minutes. no drilling or cutting is required. Clean the installation location in advance, use 3M tape on the back, slightly heat it and stick it directly on the trunk for better fixation.
- ★Package included: 1 x Corvette C6 ZR1 Style Rear Trunk Lid Wing Spoiler.
- Fitment: Compatible With ALL 2005-2013 Chevy Chevrolet Corvette C6 Models
- Style: H Style; Color: Carbon fiber painted; Made of high quality Plastic. Install with double sided tape, It is recommended that you wait at least 24 hours before driving to ensure that the rear spoiler fully fits to your vihicle
- Easy installation. Stick it on your vehicle with the mounting tape we offer. Clean up the surface before installing it
- Packing List:1 X Corvette C6 ZR1 Style Rear Trunk Lid Wing Spoiler. Including necessary hardware shown in the pictures
- Function: The rear spoiler can effectively reduce the air resistance of the vehicle at high speed, improve traction and grip, thus improving driving stability. At the same time, the rear wing spoiler effect can save some fuel
- 【Perfect Model Fitment】: Specifically designed for Chevy Corvette C8 Models (2020-2025), this rear spoiler ensures precise alignment and a seamless OEM-style integration. Please verify your vehicle model before purchase.
- 【Premium ABS Construction】: Made from high-quality UV-coated ABS plastic, this spoiler resists impact, extreme temperatures, and fading—ensuring long-lasting durability and a polished look under all conditions.
- 【Upgrade Your Style】: The gloss black/carbon fiber finish shines brilliantly under sunlight and complements your Charger’s factory paint. Its sleek, curved design adds a touch of sportiness and sophistication, making your vehicle stand out with dynamic presence.
- 【Enhanced Aerodynamic Performance】: Engineered to increase downforce and reduce wind resistance, this spoiler improves high-speed stability and overall driving safety while optimizing aerodynamic efficiency.
- 【Straightforward Installation】: Uses a combination of bolt-on mounting and strong 3M tape for secure attachment. For best adhesion, heat the tape with a hairdryer during installation. Note: Instructions and 3M tape not included—professional installation is recommended.
- Fitment: Compatible with Chevy Corvette C5 1997-2004.
- Note:Need to Remove the Original Rear Wing, Drill Holes, Using Screw and Paste 3M Tape for Installation
- Materia: ABS Plastic, with excellent performance and durability, Can Withstand Extreme Weather Conditions and Harsh Conditions.
- Purpose: Designed to enhance aerodynamics, this spoiler helps reduce fuel costs and improves the overall appearance of the vehicle, giving it a more dynamic and sleek look.
- Easy to Install: Please Note: Package Does not Come With Instructions. Professional Installation is Always Recommended
- Fits All 2005-2013 Chevrolet Corvette C6 Models
- Package is Included with 1 X Corvette C6 ZR1 Extended Style Rear Trunk Lid Wing Spoiler & 1 X Bag of Hardware
- Package is Included with 1 X Corvette C6 ZR1 Extended Style ABS Plastic Painted Glossy Black Rear Trunk Lid Wing Spoiler & 1 X Bag of Hardware
- Hardware is Included for Direct Bolt-On Installation.
- High-Gloss Finish: The glossy black finish delivers a sleek, polished look, adding a touch of sophistication and enhancing the aggressive styling of your Corvette C6 ZR1 extended rear spoiler.
This product presentation was made with AAWP plugin.