NHTSA ID Number: 10114494
Manufacturer Communication Number: PIC5412C
Summary
This Preliminary Information communication provides information to the technician about vehicles that may have a high-pitched whine noise during braking or accelerating. Technician will need to inspect the load floor, in the rear of the vehicle, for being properly secured. If the load floor is not fully seated check the cargo tray under the floor and insure everything is stowed in its own spot. An improperly stowed 120v charge cord set, cargo in the lower tray that can pop the load floor up, and damage to the load floor that causes the floor not to clip into place.
Condition/Concern
High-pitched whine noise during braking or accelerating, mostly in Extended Range Mode with the engine
running. The noise is coming from the 14-Volt Power Module under the rear load floor.
Recommendation/Instructions
If a customer is experiencing a high-pitched whine noise from the rear of the vehicle, check the load floor, in the rear of the vehicle, for being properly secured. Check for any noticeable gaps between the load floor and the vehicle.
5 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| CHEVROLET | VOLT | 2011-2015 |
1 Associated Document
Manufacturer Communications
Bulletin No.: PIC5412C
Date: Apr-2015
MC-10114494-9999.pdf 384.986KB
NHTSA ID Number: 10073560
Manufacturer Communication Number: PIC5412B
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
1 Associated Document
Service Bulletin Document
Bulletin No.: PIC5412B
Date: April, 2013
SB-10073560-5448.pdf 749.981KB
- Flex Level 1 EV Charger - The EVDANCE Level 1 electric car charger is compatible with J1772 electric vehicles and plug-in hybrid vehicles (North American Standard). *Tesla requires a SAE J1772 adapter.
- Convenient to Use - This charger has both NEMA 6-20 plug for 16A 240V charging (3.68kW, 10-12 mi/h) and a NEMA 6-20 to 5-15 plug adapter for 12A 120V charging (1.44kW, 2-5 mi/h). The included bag makes it easier to carry on the go. It also has a 25ft cable length, you can use it flexibly from anywhere in the garage or driveway.
- Check Your Outlet Type -This charger works with standard 120V NEMA 5-15/5-20 outlets (2-5 mph charging speed) and 240V NEMA 6-20 outlets (10-12 mph) . It's not compatible with NEMA 6-15/10-30/14-30/14-50/6-50 outlets – you'll need a NEMA 14-50/14-30/10-30/6-50 to 6-20 adapter (sold separately) to connect.
- Compatible EV Models -This EV charger works with most major electric vehicles, including Ford, Chevrolet, Hyundai, Audi, Nissan Ariya, Rivian R1S, Kia, and others. However, it's not compatible with Mini Cooper Electric Hardtop,Toyota Prus Prime/Z4X/RAV4Prime, Porsche Taycan Base/4S/Turbo/Turbo S or Tesla models (Tesla requires a J1772 to Tesla Adapter, sold separately). For a full list of compatible models, check out the Full Compatibility List on our product page.
- Indication Displays - LED display that can tell you the status as well as indicate errors while charging your electric vehicle.
- 【Reliable Safety with PBE & LRC Tech】Powered by ELEGRP's exclusive PBE technology, this level 2 EV charger provides reliable protection against surges, leakage, and overloads—trusted by over 300 million households since 2000. The J1772 charger features advanced LRC tech for better conductivity, cooler operation, and stable charging speed
- 【Dual Charging Model】Charging speed depends on your outlet type. Use the NEMA 6-20 plug for Level 2 240V fast charging at up to 3.84kWh (11-14 miles/hr). For slower Level 1 charging 120V, use the included 5-15 adapter, offering 1.44kWh (4-5 miles/hr)
- 【Max 25FT Reach &and IP67 Weatherproof Reliability】 Our 25FT portable cable offers the maximum length allowed by NEC safety standards for garage, wall, or outdoor use. This electric car charger is IP67 waterproof and built for cold weather, from -21°F to 121°F, including heavy rain, or snow
- 【U.S.-Based Expert Support & and 2-Year Warranty】Get real help from our U.S.-based support team, available Mon–Sat (5 AM–3 PM PT) for fast, professional assistance. Every ELEGRP charger is backed by a 2-year replacement warranty, so you can charge your vehicle with confidence
- 【Universal J1772 Compatibility】Compatible with all SAE J1772 certified EVs, BEVs, and PHEVs. For Tesla owners: a J1772-to-NACS adapter (sold separately) may be required. Please verify your car compatibility before purchase and contact our support team with any questions
- Charge with Confidence: ChargePoint builds reliable, flexible EV charging stations for home, business, and fleets. Get 24/7 support and access to hundreds of thousands of North American charging locations.
- Charge Smart: With the user-friendly ChargePoint Mobile App, you can control your electric car charger, manage reminders, connect to smart home devices, find stations, get data and charging info, and access the latest features. Note: WiFi is needed for certain functionalities and troubleshooting steps if connectivity issues arise.
- Vast Network: Wherever you go, ChargePoint’s network includes 274k+ stations across North America and Europe and 565k+ roaming partner stations.
- Safe & Durable: Rely on this UL-certified EV charger for safe home charging. It can be installed indoors or outdoors by an electrician and includes a cold-resistant cable.
- Fast & Powerful: This EV charger charges 9× faster than a 120V outlet, delivering up to 45 mi/hr., dependent upon your vehicle. It features a J1772 connector for all non-Tesla EVs and requires a 20A or 80A circuit. For Tesla EVs, this will require an adapter.
- PLUG-IN, NO ELECTRICIAN: EVIQO Level 2 EV charger with a max output of 40A on a dedicated 50A / 240V circuit fully recharges most EVs overnight. This wall-mounted plug-in model requires an EV-graded 4-prong NEMA 14-50 outlet (same style as an RV or range outlet - NOT a dryer outlet). Verify your vehicle's connector type and home electrical setup before ordering.
- J1772 CONNECTOR - NON-TESLA EVs: Electric Vehicle Charging Stations works with all North American EV and PHEV models and also functions as a Tesla Level 2 charger when used with a J1772-to-NACS adapter (not included). The fully rubberized SAE J1772 connector with a durable metal latch provides a secure, ergonomic grip.
- SMART APP CONTROL: Enhanced WiFi Antenna keeps EVIQO EV car charger level 2 online in garage & basement. Control start/stop, set 6-40A current, get reminders & track consumption/cost right in the smartphone. Smart app features require the charger to be connected to 2.4 GHz WiFi (Internet) network.
- CERTIFIED & WEATHERPROOF: UL/ETL/FCC/Energy Star certified and built into an IP66/NEMA-4 weatherproof enclosure, so this electric vehicle charging station stands up to rain, snow, heat and dust. Mainboard steel shielding protects the internals of the charger for long term use.
- NEW FLUORESCENT HOLSTER: High-visibility fluorescent holster makes plug-in and storage easy even in low-light conditions. Absorbs both natural and artificial light to store energy - just 10 minutes of charge boosts brightness by ~60%, while 3 - 4 hours of exposure delivers extended glow. Helps quickly locate the connector at night and keeps it securely stored when not in use.
- [2026 INTELLIGENT CHARGING UPGRADE — PRECISION CONTROL MEETS SMART SCHEDULING] After surveying 100K+ U.S. EV owners, the Raylix R&D team found that nearly all drivers recognized the necessity of adjustable current and scheduled charging. Our upgraded J1772 charger features 4-level adjustable current (8A/10A/12A/16A) and a 1–12 hour smart delay timer. Whether you're charging overnight or during off-peak hours, enjoy smarter energy use, lower costs, and total convenience—on your schedule.
- [ONE CHARGER, ALL J1772 EVs/PHEVs READY!] Compatible with all SAE J1772 electric vehicles and plug-in hybrids—whether it’s Ford, GM, Nissan, Audi, BMW, Kia, Hyundai, Honda, Chevy, or more. Perfect for home or on-the-road charging, our 16A Level 1 & 2 charger ensures your EV is always powered and ready for any journey.
- [CHARGE 4× FASTER — NO MORE WAITING] In a rush? Our 16A Level 1 & 2 charger delivers charging speeds up to 4× faster than standard 8A Charger Level 1. Whether it's an early commute, a spontaneous trip, or last-minute errands, your EV will be ready when you are.
- [LEVEL 1 & 2 PORTABLE CHARGER — CHARGE ANYWHERE, ANYTIME] Designed for maximum flexibility, Raylix Level 1 & 2 EV charger features both 5-15 and 6-20 plug compatibility. Whether you're charging in your garage, at a friend's house, or at a roadside motel. NEMA 6-20 plug for Level 2 ev charging (240V, 16A, 3.68kW, 9-12 miles/hr) and a NEMA 5-15 adapter for Level 1 ev charging (120V, 12A, 1.44kW, 3-5 miles/hr) NOTE: In compliance with North American electrical safety standards, the charger automatically limits current to 12A when using a 5-15 outlet—protecting both your vehicle and your home’s electrical system.
- [AT-A-GLANCE CHARGING COMMAND: TOTAL CONTROL, INSTANTLY] While most ev chargers solutions confine vital data to in-car screens, the Raylix tesla charger breaks free with its enhanced TFT color display. This Raylix-exclusive feature delivers crystal-clear, real-time updates—voltage, current, power load, AND critical charging temperature—directly on the unit. Just one glance gives you complete charging insight. It’s not just information; it's the empowering peace of mind and satisfying control that transforms every charge into a masterfully managed experience.
SEOCONTENT-STARTBulletin No.: PIC5412C Date: Apr-2015 Subject: High-Pitched / Whine Noise Heard Intermittently from Behind Rear Seats Models: 2011-2015 Chevrolet Volt This PI was superseded to update Model Years. Please discard PIC5412B. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition/Concern Some customers may comment on hearing a high-pitched whine noise during braking or accelerating, mostly in Extended Range Mode with the engine running. The noise is coming from the 14-Volt Power Module under the rear load floor. Recommendation/Instructions If a customer is experiencing a high-pitched whine noise from the rear of the vehicle, check the load floor, in the rear of the vehicle, for being properly secured. Check for any noticeable gaps between the load floor and the vehicle. See Photos below The picture below shows a load floor that is NOT properly snapped into place The picture below shows the load floor installed correctly 1 Some of the causes for the load floor not properly secured into place is: 1. A improperly stowed 120v charge cord set 2. Cargo in the lower tray that can pop the load floor up 3. Damage to the load floor that causes the floor not to clip into place. The picture below shows the 120v charge cord set stored properly in its place The picture below shows the 120v charge cord set NOT stored properly, which would cause the load floor not to secure properly in the front and causes a gap and a entry point for noise into the front of the vehicle. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.