“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10137386
Manufacturer Communication Number: 110849001W
Summary
This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
170 Affected Products
Vehicles
Condition
Transport Mode On message is displayed in the DIC and/or the red battery light is flashing. Transport Mode is intended for use for vehicles being shipped over long distances, and includes vehicles shipped into and outside of the United States and Canada.
Some products will be shipped from the assembly plant with Transport Mode On. The Transport Mode feature when enabled reduces the parasitic electrical load on the battery when the vehicle is parked, which extends the battery stand time up to 70 days without the battery going dead.
To alert the operator that Transport Mode On is enabled, the red battery light will be flashing and if equipped with a DIC, it will display a Transport Mode On message. Twenty-four hours after transport mode is turned On, with the vehicle Off, (with exception of 2015 Full-Size SUVs equipped with RPO AVF, and continuing in later model years without AVF) the key must be used to enter the vehicle, as the following functions will be disabled: Passive Entry, Remote Keyless Entry, Content Theft. For 2015 Full-Size SUVs (Cadillac Escalade models, Chevrolet Suburban, Tahoe, GMC Yukon Models), with RPO AVF, and continuing in later model years without AVF; the Remote Keyless Entry function will remain enabled during transport mode, allowing entry without a key. Exit lighting timers will function but will be reduced.
Note: For PEPS vehicles in Transport Mode On, the key fob will operate for the Start/Stop button, as long as the fob is inside the vehicle.
When the vehicle is running, the only difference in operation will be the DIC Message and the battery light flashing. The Passive Entry and Remote Keyless Entry functions are restored with the ignition in Run.
Procedure
Note: Normal vehicle diagnostics and/or service procedures should not be performed when Transport Mode is On. Turn Transport Mode Off prior to performing system checks or service procedures.
With Transport Mode On, enter the vehicle using the steps below:
- Attempt to unlock the vehicle with the FOB.
- If the vehicle is not responding to the FOB, press the PEPS door handle switch a few times (if equipped) then attempt to unlock the vehicle with the FOB.
- If the vehicle is not responding to the FOB, the key must be used to enter the vehicle.
- Turn the Transport Mode On/Off using the vehicle specific procedure.
2019 Chevrolet Silverado LD and GMC Sierra LD
Transport Mode is enabled by activating the hazard flashers, applying the brake pedal, and then turning the ignition key to the start position or pushing the ignition mode switch with the foot on the brake for greater than 15 seconds. The mode is disabled by repeating the previous process. The DIC (if equipped) will display Transport Mode On when enabled and Transport Mode Off when disabled. For vehicles not equipped with a DIC, the battery indicator light will constantly flash on the instrument cluster when Transport Mode is On. This feature can be used as many times as necessary if the vehicle is to be stored for an extended period of time.
To turn Transport Mode On/Off, start the vehicle (as indicated by the green Ready light), activate the hazard flashers, press and hold the brake pedal, then press and hold the Start/Stop button at least 15 seconds. Transport Mode On/Off message will display on the DIC. Then turn the hazard flashers off. Allow the vehicle to sleep at least 2 minutes prior to restarting.
To turn Transport Mode On/Off, start the engine, activate the hazard flashers, hold the ignition key in the Start position for 20 seconds (the engine will not be started again). Transport Mode On/Off message will display on the DIC.
2016-2019 Buick Envision / 2018-2019 Chevrolet Equinox, GMC Terrain
To turn Transport Mode On/Off, start the vehicle, press the brake pedal, activate the hazard flashers, hold the start button for at least 15 seconds. Transport Mode On/Off message will display on the DIC and the Battery Warning light will flash.
2015-2018 Chevrolet City Express Procedure
To turn Transport Mode Off, remove the X51A Fuse Block — Instrument Panel Cover, push down the shorting pin and turn the ignition key 2 times to the Run position without turning the vehicle On. To turn Transport Mode On, with the ignition off, remove the X51A Fuse Block — Instrument Panel Cover, pull up the shorting pin, and turn the ignition key 2 times to the Run position without turning the vehicle On. Confirm by message on display.
2011-2019 Vehicle Procedure (Excluding Buick Cascada, Buick Envision, Chevrolet City Express, Chevrolet Bolt EV)
To turn Transport Mode On/Off, start the vehicle, activate the hazard flashers, press the brake pedal (automatic transmission) or clutch pedal (manual transmission) then press and hold the Start/Stop button or turn the ignition key to the crank position for 15 seconds. (The engine will turn Off on push button vehicles.) The same steps are used to turn On the feature.
Note: When removing the Chevrolet SS from Transport mode, the Service Front Camera message may display in the DIC, no codes are set and should appear only one time. Cycle ignition once to clear. No diagnostics or repairs are required.
2010 Chevrolet Camaro Procedure
To turn Transport Mode On/Off, activate the hazard flashers, turn the ignition key to the crank position, and then hold it in the crank position for 15 seconds. Transport Mode Off message will display and the battery light will turn Off.
To turn Transport Mode On/Off, push and hold the Start/Stop button while the brake is applied for 15 seconds or until the Transport Mode On/Off message is displayed. For SRX, if Transport Mode is enabled, this causes the RKE system to only work when the ignition is On or the BCM is awake (approximately 20 minutes after ignition Off).
1 Associated Document
Manufacturer Communications
Bulletin No.: 11-08-49-001W
Date: April, 2018
https://www.nhtsa.gov/recalls?nhtsaId=10137386
NHTSA ID Number: 10126068
Manufacturer Communication Number: 11-08-49-001V
Summary
This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
1 Associated Document
Manufacturer Communications
Bulletin No.: 11-08-49-001V
Date: July, 2017
https://www.nhtsa.gov/recalls?nhtsaId=10126068
NHTSA ID Number: 10116538
Manufacturer Communication Number: 11-08-49-001U
Summary
This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
1 Associated Document
Manufacturer Communications
Bulletin No.: 11-08-49-001U
Date: Jan-2017
https://www.nhtsa.gov/recalls?nhtsaId=10116538
NHTSA ID Number: 10137625
Manufacturer Communication Number: 11-08-49-001T
Summary
This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
1 Associated Document
Manufacturer Communications
Bulletin No.: 11-08-49-001T
Date: Nov-2016
https://www.nhtsa.gov/recalls?nhtsaId=10137625
NHTSA ID Number: 10082861
Manufacturer Communication Number: 110849001S
Summary
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REMOVE THE TRANSPORT MODE ON MESSAGE DISPLAYED IN THE DIC DUE TO VEHICLES SHIPPED OVER LONG DISTANCES OUTSIDE THE U.S. AND CANADA.
1 Associated Document
Service Bulletin Document
Bulletin No.: 11-08-49-001S
Date: August, 2016
https://www.nhtsa.gov/recalls?nhtsaId=10082861
NHTSA ID Number: 10089228
Manufacturer Communication Number: 11-08-49-001R
Summary
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REMOVE THE TRANSPORT MODE ON MESSAGE DISPLAYED IN THE DIC DUE TO VEHICLES SHIPPED OVER LONG DISTANCES OUTSIDE THE U.S. AND CANADA.
1 Associated Document
Service Bulletin Document
Bulletin No.: 11-08-49-001R
Date: June, 2016
https://www.nhtsa.gov/recalls?nhtsaId=10089228
SB-10089228-2280.pdf 826.689KB
NHTSA ID Number: 10081365
Manufacturer Communication Number: 11-08-49-001Q
Summary
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON THE IDENTIFICATION OF VEHICLES THAT ARE SHIPPED WITH THE TRANSPORT MODE ON AND HOW TO TURN IT OFF.
1 Associated Document
Service Bulletin Document
Bulletin No.: 11-08-49-001Q
Date: May, 2016
https://www.nhtsa.gov/recalls?nhtsaId=10081365
NHTSA ID Number: 10112772
Manufacturer Communication Number: 11-08-49-001P
Summary
This technical bulletin provides a procedure on how to take the vehicles out of transport mode for vehicles with the condition of Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing
1 Associated Document
Manufacturer Communications
Bulletin No.: 11-08-49-001P
Date: Mar-2016
https://www.nhtsa.gov/recalls?nhtsaId=10112772
NHTSA ID Number: 10113615
Manufacturer Communication Number: 11-08-49-001O
Summary
This technical bulletin provides repair procedure information to correct a customer concern of Transport Mode On message displayed in Driver Information Center (DIC) and/or battery light is flashing.
1 Associated Document
Manufacturer Communications
Bulletin No.: 11-08-49-001O
Date: Apr-2015
https://www.nhtsa.gov/recalls?nhtsaId=10113615
NHTSA ID Number: 10114244
Manufacturer Communication Number: 11-08-49-001M
Summary
This technical bulletin provides a procedure on how to turn the transport mode message of and reset the battery light flashing.
1 Associated Document
Manufacturer Communications
Bulletin No.: 11-08-49-001M
Date: November, 2014
https://www.nhtsa.gov/recalls?nhtsaId=10114244
MC-10114244-9999.pdf 230.627KB
NHTSA ID Number: 10113570
Manufacturer Communication Number: 11-08-49-001N
Summary
This technical bulletin is a revision for 11-08-49-001M to update the Condition.
1 Associated Document
Manufacturer Communications
Bulletin No.: 11-08-49-001N
Date: Feb-2015
https://www.nhtsa.gov/recalls?nhtsaId=10113570
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- 8+ Popular Functions, Full System Diagnosis: TopScan Lite supports OBD2 full system diagnosis functions, including read/clear codes, ECU information,AUTO VIN, viewing real-time data, and active tests. It offers 8+ reset functions: Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF Regeneration, ABS Bleeding, BMS Reset, and Airbag Reset. By these functions, you can save on unnecessary repair costs and reduce repair times significantly.
- Bi-directional Control, Quickly Locate Problems: The bi-directional scan tool enables you to send commands from your smartphone directly to the vehicle's ECU for active testing. This feature helps to quickly narrow down problem areas, such as A/C clutch, windows, doors, sunroof, etc., reducing the mechanic's diagnostic time and can help DIY users locate faults more easily. Additionally, TopScan Lite provides fault analysis and repair guidance, helping you solve problems efficiently.
- Bluetooth Quick Pairing in Seconds: With the upgraded 5.0 Bluetooth system, TopScan Lite ensures a faster connection, eliminating the hassle of wires.The bluetooth pairing process needs to be completed in the application (IOS: TOPGURU&Android: TopScan). you can download our app from APP Store and Google play. TopScan Lite provides one software updates with no fee. (Tips: Cannot support 32-bit cell phones}
- Performance Testing: Always Know Your Vehicle's Condition, TopScan Lite supports speed performance testing, allowing you to analyze speed changes and calculate engine displacement efficiency,the higher the VE volumetric efficiency, the better the power output performance of the engine.
- 4- Repair Guides, Your Online Assistant: TopScan Lite has launched 4 functions that are most touching for all car owners, DIY enthusiasts, and mechanics: TSB factory technical bulletins, easier and more convenient search. The OBD common fault code repair guidance, leading you to solve problems quickly. DLC diagnostic seat location, quickly positioning. Fault code database, telling you the reasons and solutions for all fault lights, saying goodbye to complicated methods.
- 🔥🔥🔥【2024 MK808BT PRO 2.0 Version Of MK808S】Autel has upgraded MK808S/ MK808BT to MK808BT PRO in functionality and fluently hardwares. With easy-to-use Android 11 OS, 5X Faster RK3566 CPU, larger 4G+64G, 2.4&5 GHz Wi-Fi. 👍 Full Bidirectional, 3K+ Active Tests 👍10M remote diagnostic (w/ VCI Mini, German BT) 👍 Battery Tests/ Starter Test/ Generator test/ In/Out-Vehicle test(work with BT506) 👍 Inspect difficult-to-reach areas(work w/ MV108S) 👍 AutoAuth solution for 2017+ FCA vehicles.
- 🏆【Full Systems Bidirectional Control, 3000+ Tests】Autel MK808BT Pro is the best bidirectional scanner that workshops and auto enthusiasts can add to their tool shelves. MK808BT Pro can send commands to full systems actuactors/components to do full functional tests/ check working status. Eg: turn on radiator fan, Autobleed ABS, modulate the throttle, open/close windows, fold/unfold mirrors, adjust wipers,test door, Injector Buz Test, turn on interior & exterior lights,sound horn, headlamps,etc.
- 🏆【BT Version Of MK808S/ MX900/ MX808S/ MK808Z, More Practical】It's time to discard your wired tool and have a convenient wireless diagnostic tool! Autel MK808BT Pro makes your services repair easier, you can in/ around the vehicles. Compare to the out-of-date wired tools Autel MK808S MX808S MK808Z MX900, MK808BT Pro adds VCI Mini(valued 130Bu cks) with 10M range convenient wireless diagnosis but only 70US D more. Adopted German BT technology, ensures the safety & stablility of data transfer.
- 👍【28+ Hot Services, 99% Coverage】Autel MK808BT Pro buiness scanner, level-up of MK808S/ MK808Z/ MX900/ MX808S, supports 150+ car brands worldwide & FCA AutoAuth/ Renault SGW. MK808BT Pro equipped with 28+ hot services including Injector Coding, ABS Bleeding, Oil Reset, SAS Cali.bration, IMMO Keys(Basic), Battery Registration, etc. MK808BT Pro ranks top in professional automotive diagnostic scanner and keeps updating to support more newer models and functions from 2023 to 2024.
- 👍【OE-Level All Available Modules Diagnostics, Make A Full Check】Autel MK808BT Pro dealer-level scanner supports 150+ brands worldwide, can quickly access vehicles'ECU to do full scans via convenient & stable BT connection & identify cars by AutoVIN or Manually Input. It read ECU info, read/clear DTCs, view all sensors live data in 4 format(text/ wave graph/ histogram/ meter diagram), do active functional test and print the diagnosis data you need. Master cars situation with a few simple clicks!
- 💪【2024 New Uugraded Version of X431 ELITE GM】2024 LAUNCH X431 Elite 2.0 PRO fit for GM is upgraded version with Enhanced Hardwares & Software, MUCH FASTER and SMARTER! 👍Dismountable USB Cable 👍Larger 2G+16GB Extended Memory 👍Android 8.1 OS 👍 3000mAh Battery with Power Button 👍Lifetime F~ree Update👍 Full Systems Diagnostic 👍All F~ree Service Function 👍Bi-Directional Control 👍AutoVIN 👍Full OBD2 Modes
- 💪【Powerful Bi-Directional Control/Active Test】LAUNCH X431 Elite 2.0 Pro fit for GM scanner code reader can send command directly from the automobile scanner to vehicle's ECU to perform vehicle-specific active tests on car's components and parts, confirm whether this part work normally and find out potential problems. Such as Doors, Windows, Mirrors, Locks, Lights, Headlamps, Wipers, Sunroofs, Air Pump Relay Test, Fuel Pump Relay Test, Spark Advance Test, Fan Speed Desired Test, Cooling Fan Test etc.
- 💪【All F~ree Maintenance Service Reset】As the popular diagnostic scanner in the market, LAUNCH X431 Elite 2.0 PRO diagnostic scan tool comes with comprehensive service options: Reset, Relearn, Relearn, Match, Adaption, Calibration, Initialization. Such as Oil light reset, EPB, SAS, Throttle Relearn, D.P.F Regen, ABS Bleeding, Injector Coding, CVT, Air Suspension, Crankshaft Relearn, Gear Learning, Battery Registration. The Functions depends on the conditions of the vehicle, please inform the VIN by QA or Email for check.
- 💪【OE-LEVEL Full Systems Diagnostic 】2024 new upgraded LAUNCH X431 Elite 2.0 PRO fit for GM diagnostic scan tool, provides you with All-Around & In-Depth diagnostic for all available modules such as ECM/BCM/SAS/ABS/TCM/.... It supports to read/clear codes, live data stream, retrieves module info, turn off warning light, actuation test, freeze-frame and so on, which make you easily know the car situation and finger out problems soon.
- 💪【AUTO VIN FOR GM & FULL OBD2 MODES FOR ALL BRANDS】AUTO-VIN can auto access to car information and scan vehicle systems by one touch for 2006+ GM cars like Buick/Chevy/Cadillac/GMC/Alpheon/Ravon/Pontiac/Saturn/Hummer/Oldsmobile/Holden/Daewoo/Workhorse, no longer needed to input manual. LAUNCH X431 Elite 2.0 Pro fit for GM has an extra function: It supports Full 10 OBD2 Test Modes for ALL brands vehicles after 1996, including I/M readiness, O2 Monitor Test, EVAP test(Mode 8), On-board Monitor test(Mode 6) and more.
- Advanced online ECU coding►►Maximize the capabilities of your vehicles with the ArtiDiag Pro ECU Coding tool. This scan tool, seamlessly compatible with renowned models such as VW, AUDI, SKODA, SEAT, BENZ, and more, empowers you to uncover hidden features, deactivate annoying functions, and code retrofitted components for peak performance. Ensure a backup before coding and steer clear of coding sessions on low battery levels.
- Efficient Diagnostics with Bidirectional Control►►Say goodbye to uncertainty, streamline diagnostics, and reclaim valuable time with ArtiDiag Pro scan tool. This bidirectional scan tool exceeds expectations, enabling targeted tests on individual actuators to swiftly identify and resolve issues. Covering lights, door locks, fuel and coolant systems, windows, wipers, EVAP, and more in vehicle components.
- 31+ Services Resolve 90% of Repair Challenges►►Unleash maximum productivity with the ArtiDiag Pro, a scan tool that tackles 90% of maintenance issues through its 31 special functions. Effortlessly clear oil maintenance indicators with oil reset. Engage the EPB Reset for brake system management and establish precise alignment with the Steering Angle Reset to define the straight-line reference position for your vehicle.
- FCA Autoauth&Full Sets of Adapters►►This diagnostic tool supports Autoauth for FCA SGW, Chrysler, Jeep, Dodge, Fiat etc. 2017 and later. Equipped with the Chrysler 12+8 adapter, the BMW-20 Adapter and Benz BZ-38 Adapter, this scanner saves you the hassle of sourcing adapters separately.
- Professional Customer Support►►At TOPDON, your satisfaction is our unwavering commitment. Experience hassle-free support and a lifetime of expert assistance. Should you encounter any challenges, reach out to us at 833-629-4832. For returns, please damage the packaging to prevent Amazon from reselling it. Please be advised that after two years, a fee of 249 Bucks will apply for software updates.
- 🔥🔥🔥【2024 NEW VERSION OF MX808 MK808, SAME AS MK808BT PRO】Big Surprise! Autel has upgraded the MK808 to the 2024 MK808S. With the same cost, you are experiencing 5X faster diagnostics and 150 wider car coverage from 1996-2023-2024. Function as MK808BT PRO MK808K-BT MK808Z-BT, the pro-level MK808S enjoys powerful CPU ROCKCHIP RK3566, improved Android 11, larger 4+64GB, 5G & 2.4 GHz Dual WiFi, newly added Wi-Fi Print, Bi-directional Control and FCA Autoauth for Chrysler Jeep Dodge Fiat etc.
- 【2024 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2024 upgraded version of MaxiChek MX808, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective Autel scanner (without breaking the bank, same as MP808BT and MS906BT). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, supports 150+ car brands worldwide & FCA AutoAuth, Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including Oil Reset, SAS Calibration, IMMO, ABS Bleeding, Injector Coding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2023 to 2024.
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, provides ECU info, displays Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
- 【AUTO SCAN & AUTOVIN, 5X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its AutoVIN technology, you can identify your vehicle's make, model, and year information with just one click. The convenient AutoScan feature automatically scans all of the vehicle's ECUs and detects any fault codes. Check AutoVIN compatibility, please contact us at 📞 MotorzoneUS @ outlook . com 📞
- 👍【2024 LAUNCH NEW RELEASED ALL-IN-ONE SCANNER】 LAUNCH X431 PRO ELITE comes with✅Full Bi-directional Control✅ECU/Online Coding✅37+ Services✅All Systems Diagnostics✅F.C.A AutoAuth✅CANFD DOIP✅ V.A.G Guide✅ Refresh Hidden Functions✅Auto Vin✅Remote Control✅20,0000+ Vehicle Coverage✅ 25 languages✅8 Extension Modules Supported(TPMS,XPROG 3,Oscilloscope ...) 👉X431 PRO ELITE combine all the hot functions of comprehensive scanners according to the customer's favorite need.
- 👍【FULL BI-DIRECTIONAL CONTROL】X431 PRO ELITE Factory-Level scanner is capable of full bi-directional controls (active test) over various vehicle sub-systems and components like fuel pump test, radiator fan, cooling fan test, injector kill tests, relays,coils, solenoid valves, throttle, lights, abs motor pump, headlights, A/C clutch, windows/doors/roof/wipers etc. 🚩The bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.
- 👍【FULL ADVANCED FUNCTIONS: ECU CODING, V.A.G GUIDED...】LAUNCH X431 PRO ELITE diagnostic tablet can perform Online ECU coding for 95% cars, Component Matching, PMI, Adaptive Data Reset, V.A.G Guided,Power Balance,Online Calibration,Online Parameterization to diy vehicle settings and disable annoying features like seatbelt alarm, speed limiter,daytime lights and reveal hidden functions like rear-view mirror etc. 🚩The car scanner is better than other brands' scanners: More feature.
- 👍【HOT 37+ RESETS/CALIBRATION/INITIALIZATION/】LAUNCH X431 PRO ELITE compatible with 150+ car makes 1996-2024 and offers 37+ HOT services including Oil Reset, EPB, SAS Calibration,DPF, BMS, Throttle, TPMS Reset, Gearbox Match, Suspension, ABS Bleed, Injector Coding...You will get 300+ resets under "vehicle brand" >"system">"special functions".🚩This x431 diagnostic tool that is most worthwhile for DIYers, mechanics, and tire shops.
- 👍【8 EXPANSION MODULES SUPPORTED 】Support ADAS, VideoScope, Sensor Box, Endoscope,Oscilloscope,Battery tester,Wifi Printer,TS GUN, PROG 3 etc.➤ADAS Kit to assist ADAS calibration;VSP-600 VideoScope to check unseen parts of the engine, fuel tank etc.;S2-2 SensorBox to simulate vehicle sensor faults;O2-1 ScopeBox Oscilloscope to quickly acquire circuit signals;Battery Tester to do battery test;Printer to print out diagnostic reports; TS GUN: Activate all sensors,TPMS relearn,Program LAUNCH sensors;X-PROG 3🚩All are sold separately to meet your various needs.
- 【Recommended by YouTube Machinists】We are proud to tell that LAUNCH X431 PROS V+ has been recommended as " Perfect Overall Car Diagnostic Scanner " by famous editors, and also highly recommended by YouTube machinists.
- 【2024 Newly Added CANFD】With the CANFD Connector, you can seamlessly diagnose a wider range of vehicle models (up to model year 2024, see image below for supported models) using advanced CANFD protocols. Gone are the days of being limited to certain models - now you can confidently handle the latest models, even those with the most advanced systems.
- 【2024 Top Professional Car Scanner Diagnostic for All Cars】LAUNCH X431 PRO V+ obd2 scanner add more functions,No Extra Software Fee; Newly Added CANFD Connector; VAG Guided Function; Supports AutoAuth for FCA SGW; Online Coding; Nox Sensor Reset; Setting & Changeover (adblue reset, unlock the engine after a collision, cancel ABS driving test, and more) for Benz; Modification for BMW; Flash Hidden Functions; Anti-theft IMMO Service; Power Balance; Customization; Parameterization
- 【What Are the 2024 PROSV+ Hardware Changes】Launch X431 PROSV+ car scanner Updated and Optimized hardware; Branded Lenovo Tablet with 5.0 MP Pixel Rear Camera+ 2.0 MP Pixel Real Camera; Android 9.0 System;2.4GHz&5GHz Dual-Frequency Wi-Fi,the transmission rate is 4Xfaster than old version; 32+128gb (EXTENDABLE) storage; CPU Processor Updated from 1.4GHz to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology; 25 language: English, French,Spanish etc.
- 【Bi-Directional+Online Coding+Over 37 Reset Services+Adaptation+Initialization+ Matching】PROS V+ scan tool Elite also support:programming,Gear/ SAS/ EPB/ TPMS/ IMMO/ BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.You can get 100+ advanced special functions under the"vehicle brand"-"menu"-"system" - "special functions".
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 【✅FREE LAUNCH 6V 12V Battery Tester】Reach us for the FREE LAUNCH 6V 12V Battery Tester,it can be used for Battery Cranking system Test, Battery Charging system Test, Battery Health Test,etc.👍👍👍With Over 1000+ LAUNCH Engineers Strong Technical Team As Endorsement,LAUNCH X431 V Pro 4.0 Elite becomes OVER 200,0000 mechanic 's First Choice!!
- 【 ✅2024 Model ✅Faster, More Popular ,Wider Regional vehicle coverage 】LAUNCH X431 V Pro 4.0 Elite scan tool adds loads of OE-Level features as ➤ Free VAG Guided Function➤ 【AutoAuth for FCA SGW】which makes V pro works with Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017➤Setting & Changeover (adblue reset, unlock the engine after a collision, cancel ABS driving test, and more) for Benz ➤Modification for BMW ➤Offline Coding ➤Customization ➤Personalization, for worldwide vehicles, and keep growing.
- 【✅Bi-Directional+Online Coding+✅Over 37 Reset Services+Active Test+ Adaptation+Initialization+Matching 】Besides actuate solenoids and actuators for active testing.LAUNCH X431 V Pro 4.0 Elite also support:KEY programming,Gear/SAS/EPB/TPMS/DPF/IMMO/BMS/ETS/Oil Reset,ABS Bleed, Injector coding .Gives you the ability to use dealership level relearn procedures to complete repairs or maintenance.➤You can get 300+ advanced special functions under the"vehicle brand"menu>"system" > "special functions".
- 【✅2024 Better Hardware 】LAUNCH X431 V Pro 4.0 Elite Updated and Optimized the hardware 👍 No limitation to install any third-party apps,like facebook,tiktok,instagram,etc.👍 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 8Xfaster than old version.👍5000mAh stronger battery capacity👍32+128gb(EXTENDABLE) storage,save more vehicle documents and customer data. . 👍 CPU Processor Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task .👍8XFaster AUTO VIN Tech.Time IS Money.
- 【 ✅5 Years Warranty + ✅2 YEARS Free Update +✅90 Days Money Back】:LAUNCH X431 V Pro 4.0 Elite scan tool Includes Almost OBDI&OBDII Connectors and Cables,Covering 99.99% Vehicles on the World,works on ECU of vehicles covering Asian, European, American, Russia, Malaysia, India car brands up to 200+car brands, 200,000+ car models (Keep Growing with Updates)...✅We provide 90 days unconditional return and 7/24/365 Technical Support,any problem please reach us.
Last update on 2024-02-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Copyright 2018 General Motors LLC. All Rights Reserved. Service Bulletin File in Section: 08 – Body and Accessories Bulletin No.: 11-08-49-001W Date: April, 2018 TECHNICAL Subject: Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing (Follow Procedure as Outlined Below) Models: 2011-2018 Buick Regal 2012-2017 Buick Verano 2013-2018 Buick Encore 2014-2018 Buick LaCrosse 2016-2018 Buick Cascada, Envision 2010-2016 Cadillac SRX 2013-2018 Cadillac ATS, XTS 2014-2016 Cadillac ELR 2014-2018 Cadillac CTS Sedan (VIN A) 2015-2018 Cadillac Escalade Models 2016-2018 Cadillac CT6 2017-2018 Cadillac XT5 2010 Chevrolet Camaro 2016-2018 Chevrolet Camaro 2011-2015 Chevrolet Cruze 2016-2018 Chevrolet Cruze (VIN P) 2016-2017 Chevrolet Cruze (VIN B) 2011-2018 Chevrolet Volt 2012-2014 Chevrolet Orlando (Canada) 2012-2018 Chevrolet Sonic 2013-2018 Chevrolet Spark, Trax 2014 Chevrolet Silverado 1500 2014-2016 Chevrolet Spark EV 2014-2017 Chevrolet Caprice PPV, Corvette, Impala, Chevrolet SS 2018 Chevrolet Corvette, Impala 2014-2015 Chevrolet Malibu 2016 Chevrolet Malibu Limited 2016-2018 Chevrolet Malibu (VIN Z) 2015-2018 Chevrolet City Express, Colorado, Silverado, Suburban, Tahoe 2017-2018 Chevrolet Bolt EV 2018-2019 Chevrolet Equinox 2014 GMC Sierra 1500 2015-2017 GMC Canyon, Sierra, Yukon Models, Yukon XL Models 2017-2018 GMC Acadia 2018-2019 GMC Terrain Attention: This Bulletin also applies to any of the above models that may be Export from North America vehicles. This Bulletin has been revised to add the 2018-2019 Equinox and Terrain. Please discard Corporate Bulletin Number 11-08-49-001V. Page 2 April, 2018 Bulletin No.: 11-08-49-001W Condition Some customers may comment that there is a “Transport Mode On” message displayed in the DIC and/or the red battery light is flashing. The transport mode is intended for use on vehicles being shipped over long distances, and includes vehicles shipped into and outside of the United States and Canada. Some products will be shipped from the assembly plant with the Transportation Mode On. The feature reduces the electrical load on the battery when the vehicle is parked, which extends the battery stand time. To alert the operator that the mode is on, the red battery telltale will be flashing and if equipped with a DIC, it will display a Transport Mode On message. 24 hours after transport mode is turned on, with the vehicle Off, (with exception of 2015 Full-Size SUVs equipped with RPO AVF, and continuing in later model years without AVF) the key must be used to enter the vehicle, as the following functions will be disabled: Passive Entry, Remote Keyless Entry, Content Theft. For 2015 Full-Size SUVs (Cadillac Escalade models, Chevrolet Suburban, Tahoe, GMC Yukon Models), with RPO AVF, and continuing in later model years without AVF; the Remote Keyless Entry function will remain enabled during transport mode, allowing entry without a key. Exit lighting timers will function but will be reduced. Note: For PEPS vehicles in transportation mode, the key fob will operate for the Start/Stop button, as long as the fob is inside the vehicle. When the vehicle is running, the only difference in operation will be the DIC Message and Battery Telltale on. The Passive Entry and Remote Keyless Entry functions are restored with the ignition in run. The intent of the feature is to prolong battery stand time. The mode SHOULD be left on and it is recommended to leave it on while the vehicle is in dealer inventory. Also a customer may want to use the mode if the vehicle is going to be stored. The method to turn the mode off is the same to turn the mode on. Refer to the section below for the method to turn the mode off and on. Procedure Note: Normal Vehicle Diagnostics and Service Procedures Should Not Be Performed when Transport Mode is Active. Turn Off Transport Mode Prior to Performing System Checks or Service Procedures. When the Transport Mode is on (active), enter the vehicle using the steps below. 1. Attempt to unlock the vehicle with the FOB. 2. If the vehicle is not responding to the FOB, press the PEPS door handle switch a few times (if equipped) then attempt to unlock the vehicle with the FOB. 3. If the vehicle is not responding to the FOB, the key must be used to enter the vehicle. 4. Turn the Transport Mode on/off using the appropriate procedure below. 2017-2018 Chevrolet Bolt EV To turn the Transport Mode On/Off, start the vehicle (as indicated by the green Ready light), activate the hazard flashers, press and hold the brake pedal, then press and hold the Start/Stop button at least 15 seconds. The “Transport Mode On/Off” message will appear on the DIC. Then turn the hazard flashers off. Allow the vehicle to sleep at least 2 minutes prior to restarting. 2016-2018 Buick Cascada To turn the Transport (Logistic) Mode On/Off, it will be necessary to start the engine, activate the hazard flashers, hold the ignition key in the “Start” position for 20 seconds (the engine will not be started again). The “Transport Mode On/Off” will appear on the DIC. 2016-2018 Buick Envision / 2018-2019 Chevrolet Equinox, GMC Terrain To turn the Transport Mode On/Off, it will be necessary to start the vehicle, press the brake pedal, activate the hazard flashers, hold the start button for at least 15 seconds. The Transport Mode On/Off message will be displayed on the DIC and the Battery Warning lamp will flash. 2015-2018 Chevrolet City Express Procedure To turn the Transport Mode Off, it will be necessary to remove the X51A Fuse Block — Instrument Panel Cover, push down the shorting pin and turn the ignition key 2 times to the run position without turning the vehicle on. To put the Transport Mode back on, with ignition off, remove the X51A Fuse Block — Instrument Panel Cover, pull up the shorting pin, and turn the ignition key 2 times to the run position without turning the vehicle on. Confirm by message on display. 2011-2018 Vehicle Procedure (Excluding Buick Cascada, Buick Envision, Chevrolet City Express, Chevrolet Bolt EV) To turn the Transport Mode On/Off, it will be necessary to start the vehicle, activate the hazard flashers, press the brake pedal (automatic transmission) or clutch pedal (manual transmission) then press and hold the Start/Stop button or turn the ignition key to the crank position for 15 seconds. (The engine will turn OFF on push button vehicles.) The same steps are used to turn on the feature. Note: When removing the Chevrolet SS from Transport mode, the “Service Front Camera” message may appear in the DIC, no codes are set and should appear only one time. Cycle ignition once to clear. No diagnostics or repairs are required. 2010 Chevrolet Camaro Procedure To turn the Transport Mode On/Off, it will be necessary to activate the hazard flashers, turn the ignition key to the crank position, and then hold it in the crank position for 15 seconds. The Transport Mode Off message will be displayed and the Battery light will turn off. Bulletin No.: 11-08-49-001W April, 2018 Page 3 2010 Cadillac SRX Procedure To turn the Transport Mode On/Off, it will be necessary to push and hold the Start/Stop button while the brake is applied for 15 seconds or until the Transport Mode Off message is displayed. For SRX, if Transport Mode is active, this causes the RKE system to only work when the ignition is On or the BCM is awake (approximately 20 minutes after ignition off). Note: On vehicles that are shipped from the assembly plant with the transportation mode on, turning the feature off is included in the normal PDI process time. No additional warranty claims should be submitted to disable or enable this feature.
SEOCONTENT-END