NHTSA Campaign Number: 14V394
Manufacturer General Motors
LLC
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 554,328
If the key is not in the run position, the air bags may not deploy if the vehicle is involved in a crash, increasing the risk of injury.
Summary
This defect can affect the safe operation of the airbag system. Until this recall is performed, customers should remove all items from their key rings, leaving only the ignition key. The key fob (if applicable), should also be removed from the key ring.
General Motors
LLC (GM) notified the agency on July 2, 2014 that they are recalling 554,328 model year 2003-2014 Cadillac
CTS vehicles manufactured August 16, 2001, to April 28, 2014, and 2004-2006 Cadillac
SRX vehicles manufactured March 20, 2003, to August 11, 2006. In these models, the weight on the key ring and/or road conditions or some other jarring event may cause the ignition switch to move out of the run position, turning off the engine
.
Remedy
GM will notify owners, and dealers will install two key rings and an insert in the key slot or a cover over the key head on all ignition keys, free of charge. The recall began on September 15, 2014. Owners may contact Cadillac
customer service at 1-800-458-8006. GM’s number for this recall is 14172.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
#14497C: Product Safety Recall – Unintended Ignition Key Rotation – (Jun 12, 2017)
| Subject: | 14497C – Unintended Ignition Key Rotation |
| Models: | 2011-2014 Cadillac |
| Equipped with Traditional Key Ignition |
The service procedure section has been revised to include instructions regarding an owner manual supplement which has been added to this bulletin. Upon completion of the required correction, dealers should insert a copy of the supplement into the vehicle’s owner manual. Please discard all copies of bulletin 14497B.
Vehicles involved in this recall were previously loaded into IVH under safety recall 14172. Since we now have a repair for certain 2011 CTS vehicles (built after December 12, 2010) and all 2012-2014 CTS vehicles, they have been transferred to this safety recall. The 2003-2010 and certain 2011 CTS vehicles (built prior to December 13, 2010) and the 2004-2006 SRX vehicles, however, will remain in safety recall 14172 because they will have a different repair, which is not available at this time. Please ensure that you check IVH for vehicle eligibility and that the vehicle key has a round hole and not a slot before proceeding with this repair. An initial supply of the parts required to complete this recall are being preshipped to involved dealers of record. Dealers will receive a cancellation on any order placed for the related part number until further notice. When the pre-shipment activity concludes, the parts will become available for dealer ordering.
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
Vehicles involved in this recall were placed on stop delivery July 2, 2014. Once the service procedure contained in this bulletin has been performed on the vehicle, the vehicle is released from stop delivery and the vehicle can be delivered to the customer.
All involved vehicles that are in dealer inventory must be held and not delivered to customers, dealer traded, or used for demonstration purposes until the repair contained in this bulletin has been performed on the vehicle.
Condition
General Motors
has decided that a defect which relates to motor vehicle safety exists in certain 2011-2014 model year Cadillac
CTS vehicles. If the key ring is carrying added weight and the vehicle goes off road or experiences some other jarring event, or if the driver unintentionally bumps the key ring or items attached to the key ring with their knee, the key may unintentionally move away from the “run” position. If this occurs, engine
power, power steering and power braking may be affected, increasing the risk of a crash. The timing of the key movement out of the “run” position, relative to the activation of the sensing algorithm of the crash event, may result in the airbags not deploying, increasing the potential for occupant injury in certain kinds of crashes.
Customers should remove all items from their key rings, including the key fob, leaving only the ignition key. In addition it is very important that drivers adjust their seat and steering column to allow clearance between their knee and the ignition key.
Correction
Dealers are to add two key rings to the vehicle keys and, if required, replace ignition keys with a slot design with new service keys that have a round hole design.
Vehicles Involved
All involved vehicles are identified by Vehicle Identification Number on the Investigate Vehicle History screen in GM Global Warranty Management system. Dealership service personnel should always check this site to confirm vehicle involvement prior to beginning any required inspections and/or repairs. It is important to routinely use this tool to verify eligibility because not all similar vehicles may be involved regardless of description or option content.
For dealers with involved vehicles, a listing with involved vehicles containing the complete vehicle identification number, customer name, and address information has been prepared and will be provided to U.S. and Canadian dealers through the GM GlobalConnect Recall Reports, or sent directly to export dealers. Dealers will not have a report available if they have no involved vehicles currently assigned.
The listing may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete this recall is a violation of law in several states/provinces/countries. Accordingly, you are urged to limit the use of this report to the follow-up necessary to complete this recall.
Parts Information
Parts Pre-Ship Information – For U.S. and Canada
Important: An initial supply of key ring kits required to complete this recall will be pre-shipped to involved dealers of record. This pre-shipment began August 6, 2014 to dealers with involved vehicles. Pre-shipped parts will be charged to dealer’s open parts account.
Dealers will receive cancellations on any order placed for the related part number until further notice when the pre-shipment concludes and the part becomes available for order.
| Part Number | Description | Quantity/ Vehicle |
| 23271934
Genuine GM Ring Kit Part# - 23271934
| Key Ring Kit(Kit Contains Two 16 mm and Two 18 mm Key Rings) | 1 |
| 20985619 | Service Ignition Key | 2 |
Service Procedure
Ignition Key Inspection
- Determine if the ignition keys have a round hole or a slot design to secure a key ring.
- If the ignition keys have a hole, proceed to Key Ring Installation in this bulletin.
- If the ignition keys have a slot, replace them with service keys that have a round hole design to secure a key ring. Proceed to step 2.
- Order the service keys. Refer to the Part Information section of the bulletin.
- Cut and program the service keys. Refer to the appropriate key cutting and key learning procedures in SI.
- Discard ALL ignition keys with a slot design after ensuring the new service keys will start the vehicle.
- Proceed to Key Ring Installation in this bulletin.
Key Ring Installation
- Remove the ignition key and FOB from the original key ring(s).
- Discard the original key ring(s).
- Install one 16 mm key ring (A) on the ignition key.
- Install one 18 mm key ring (B) onto the key FOB.
- Attach the 16 mm key (A) ring to the 18 mm (B) key ring. Refer to the photograph to view the correct key ring assembly.
- Make a copy to the owner manual supplement on the last page of this bulletin and insert it into the vehicle’s owner manual.
Floor Plan Reimbursement
Dealers in possession of vehicles included in the Stop Delivery are eligible for reimbursement of floor plan expense upon completion of this recall. This reimbursement is limited to the number of days from the Stop Delivery message to receipt of the recall parts and/or repair procedures. Floor plan reimbursement beyond these dates is not allowed. The amount of reimbursement should be charged as a net amount expense using the recall labor operation provided.
Courtesy Transportation – For U.S. and Canada
The General Motors
Courtesy Transportation program is intended to minimize customer inconvenience when a vehicle requires a repair that is covered by the New Vehicle Limited Warranties. The availability of courtesy transportation to customers whose vehicles are within the warranty coverage period and involved in a product program is very important in maintaining customer satisfaction. Dealers are to ensure that these customers understand that shuttle service or some other form of courtesy transportation is available and will be provided at no charge. Dealers should refer to the General Motors
Service Policies and Procedures Manual for Courtesy Transportation guidelines.
Warranty Transaction Information
Submit a transaction using the table below. All transactions should be submitted as a ZFAT transaction type, unless noted otherwise.
Note: To avoid having to “H” route the floor plan transaction for approval, it must be submitted prior to the repair transaction.
| Labor Code | Description | Labor Time | Net Item |
| 9100802 | Key Ring Kit Installation | 0.2 | N/A |
| 9100803 | Floor Plan Reimbursement | N/A | * |
| 9101301 | Service Keys Required and Key Ring Installation Includes key cutting and key learn as necessary | 0.4 | N/A |
* The amount identified in “Net Item” should represent the product of the vehicle’s average daily interest rate (see table below) multiplied by the actual number of days the vehicle was in dealer inventory and not available for sale. This reimbursement is limited to the number of days from the date of the stop delivery message (July 2, 2014) to the date the repair is completed and the vehicle is ready for sale (not to exceed 40 days):
| Vehicle | US Reimbursement Amount | Canadian Reimbursement Amount |
| 2013 CTS | $ 5.98 | $ 7.57 |
| 2014 CTS | $ 9.33 | $ 7.57 |
Customer Notification – For U.S. and Canada
General Motors
will notify customers of this recall on their vehicle (see copy of customer letter included with this bulletin).
Customer Notification – For Export
Letters will be sent to known owners of record located within areas covered by the U.S. National Traffic and Motor Vehicle Safety Act.
Dealer Recall Responsibility – For U.S. and Export (U.S. States, Territories, and Possessions)
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
The U.S. National Traffic and Motor Vehicle Safety Act provides that each vehicle that is subject to a recall of this type must be adequately repaired within a reasonable time after the customer has tendered it for repair. A failure to repair within sixty days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. If the condition is not adequately repaired within a reasonable time, the customer may be entitled to an identical or reasonably equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation. To avoid having to provide these burdensome remedies, every effort must be made to promptly schedule an appointment with each customer and to repair their vehicle as soon as possible. In the recall notification letters, customers are told how to contact the U.S. National Highway Traffic Safety Administration if the recall is not completed within a reasonable time.
Dealer Recall Responsibility – All
All unsold new vehicles in dealers’ possession and subject to this recall must be held and inspected/repaired per the service procedure of this recall bulletin before customers take possession of these vehicles.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this bulletin. A copy of the customer letter is provided in this bulletin for your use in contacting customers. Recall follow-up cards should not be used for this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this recall enters your vehicle inventory, or is in your dealership for service in the future, you must take the steps necessary to be sure the recall correction has been made before selling or releasing the vehicle.
September 2014
Dear General Motors
Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors
has decided that a defect which relates to motor vehicle safety exists in certain 2011-2014 model year Cadillac
CTS vehicles. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
Important:
|
| Why is your vehicle being recalled? | If your key ring is carrying added weight and the vehicle goes off road or experiences some other jarring event, or if you unintentionally bump the key ring or items attached to the key ring with your knee, the key may unintentionally move away from the “run” position. If this occurs, engine |
| What will we do? | Since the installation of the key rings can be performed easily, and to reduce your inconvenience, we have included the key rings and installation instructions with this letter. If you desire, however, your dealer will install the key rings at no charge.
Your GM dealer will add two key rings to the vehicle keys and, if required, replace ignition keys with a slot design with new service keys that have a round hole design. This service will be performed for you at no charge. Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual service correction time of approximately 15 to 25 minutes. |
| What should you do? | If you install the key rings yourself, please complete the enclosed prepaid response form and return it to us in the mail. We will close the recall on your vehicle.If you would like your dealer to install the key rings, you should contact your GM dealer to arrange a service appointment as soon as possible.
Until your vehicle is serviced, you should remove all items from all of the vehicle’s key rings, including the key fob, leaving only the ignition key. In addition it is very important that drivers adjust their seat and steering column to allow clearance between their knee and the ignition key. |
| Do you have questions? | If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below. |
| Division | Number | Text Telephones (TTY) |
| Cadillac | 1-800-458-8006 | 1-800-833-2622 |
| Guam | 65-6267-1752 | |
| Puerto Rico – English | 1-800-496-9992 | |
| Puerto Rico – Español | 1-800-496-9993 | |
| Virgin Islands | 1-800-496-9994 |
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is14V394.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Jeffrey M. Boyer
Vice President
Global Vehicle Safetey
GM Recall Number: 14497
- MAINTAIN PEAK PERFORMANCE AND SAFETY ON THE ROAD - Easily find and fix the problem with your vehicle using the INNOVA 5610 bidirectional scan tool. This OBD2 scanner diagnostic tool provides real-time solutions to troubleshoot issues. Access OBD2 and OEM live data with ease, making it an essential car scanner diagnostic tool. Perfect for those seeking reliable car diagnostic scanner and code readers & scan tools for vehicles.
- PRO-LEVEL FUNCTIONALITIES - Use the INNOVA 5610’s Enhanced Data Stream to view live data for advanced systems like ABS, SRS, transmission
, and engine
. The Special Reset Function lets you use dealership-level re-learn procedures. This car diagnostic scanner is ideal for those needing a bidirectional scan tool or mechanic tools automotive for professional repairs. Compatible with select vehicle makes and models; not universal. - COMMAND WITH BIDIRECTIONAL CONTROLS - The INNOVA 5610 bidirectional scan tool sends commands to test functions such as fuel pump on/off or retracting the electronic parking brake. With this car scanner diagnostic for all cars, you can operate like a pro. Ideal for those seeking a car code reader and reset tool or advanced fixd car diagnostic tool capabilities. Compatible with select vehicle makes and models; not universal.
- EASY TO USE - The INNOVA 5610 OBD2 scanner diagnostic tool supports English, Spanish, and French. Easily use this scanner for car on most 1996 - 2023 (2024 coming soon) OBD2 vehicles to verify repairs. Designed for ease of operation, it’s a dependable code reader for cars and trucks and check engine
code reader. To confirm vehicle coverage, please utilize Innova's Coverage Checker. - BUY AND DRIVE WITH CONFIDENCE - Backed by ASE-Certified support, this car scanner pairs with the RepairSolutions2 app, trusted by 4M users, for wireless OBD scanner functionality. With free updates and no subscription fees, this durable car computer diagnostic reader ensures you’re prepared for any repair. A must-have diagnostic scanner for vehicles.
- [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine
, ABS, SRS, Airbag, TPMS, Transmission
. - [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [Broad Make & Model Coverage] Strong support for GM, Ford
, Stellantis (RAM, Jeep, Chrysler), Toyota
, Honda, Nissan
, Mazda, Subaru
, Hyundai, Mercedes-Benz, BMW, and VW.
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine
, and transmission
. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis. - [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission
/check engine
flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code. - [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission
and check engine
code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared. - [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine
, ABS, SRS, Airbag, TPMS, Transmission
. - [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [Broad Make & Model Coverage] Strong support for GM, Ford
, Stellantis (RAM, Jeep, Chrysler), Toyota
, Honda, Nissan
, Mazda, Subaru
, Hyundai, Mercedes-Benz, BMW, and VW.
This product presentation was made with AAWP plugin.








