GM TAC Support On Vehicle Automatic Transmission Concerns That Can Be Duplicated

SEOCONTENT-START

Bulletin No.: PIP5621C Published date: 09/14/2022 Preliminary Information PIP5621C GM TAC Support On Vehicle Automatic Transmission Concerns That Can Be Duplicated Models All Brand: All Model: Model Years: 2015 – 2023 VIN: from to All All All Engine: All Transmissions: Involved Region or Country Condition Cause North America Some customers may comment on the operation of the automatic transmission in their vehicle or a vibration under various driving conditions. GM has identified that multiple diagnostic repair attempts are being performed on Customer vehicles that exhibit automatic transmission concerns without the proper utilization of the GDS2 software to aid in identifying the cause of the automatic transmission concern. Correction: In an attempt to better assist in diagnosing transmission concerns and fix it right the first time, we at GM TAC are asking our dealers for your help, by providing a GDS2 session log prior to contacting TAC for assistance on transmission concerns that have the ability to be duplicated. • Dealers in the US, should attach the GDS2 session log (follow the latest version of PIP5632) to the TAC case using the Dealer Case Management (DCM) System • Dealers in the Canada, should email the GDS2 session log (follow the latest version of PIP4902) to [email protected] ** Note ** “If there is an obvious internal trans concern that requires internal trans inspection, ie, no move, fluid contamination, slip/flare, etc, and if possible, prior to trans assembly removal from the vehicle, obtain session logs to review if root cause is not isolated after the internal trans inspection. Follow below recommendations as applicable.” 1: Check all modules for any DTCs. 2: Record all DTCs found. 3: Review the freeze frame data for any codes that have set. 4: Clear the codes. 5: Select the TCM under modules in GDS2 and then transmission data. 6: Drive the vehicle under the conditions described by the customer when the concern is present. Note: If DTCs were found, refer to the freeze frame data to aid in determining how the vehicle should be driven to aid in duplicating the DTCs or the customers concern. Note: The customer may have to drive the vehicle to aid in duplicating the concern. 7: If the customer’s concern is duplicated place a bookmark at the location(s) where the concern is present. 8: Back out of the software to the home screen and then select close the application. 9: Review the session log to aid in finding root cause of the customers concern. 10: Dealers contacting GM TAC for assistance should follow bulletin 08-00-89-014B prior to providing the GDS2 session log to TAC. 11: The preferred method of contacting TAC is using the Dealer Case Management (DCM) System with the session log attached to the TAC case. TAC will review the GDS2 session log and reply back to the dealer using the DCM. 12: Dealers contacting Canada GM TAC for Automatic Transmission concerns by phone should follow the latest version of PIP4902 and send the GDS2 session log to [email protected] prior to contacting Canada GM TAC for assistance. Additional SI Keywords shake, shift, shifted, shifting, shudder, Version History Version 4 01/17/2019 – Created on 11/22/2019 – Added the 2020 model year. Modified 05/27/2021 – Added the 2021 model year. 09/13/2022 – Added 2022 and 2023 model years, added note to recommendation © 2022 General Motors. All Rights Reserved.

**************************************************************************************************************

**************************************************************************************************************

SEOCONTENT-END