Service Leveling System/Speed Limited Message Due to Aftermarket Modifications – 2021 Cadillac Chevrolet GMC

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10202399

Manufacturer Communication Number: PIT5854

Summary

This Preliminary information communicates information on vehicle speed being limited due to aftermarket lower kit being installed on the vehicle.

 


Condition

Some customers may comment on a Service Leveling System/Speed Limited message on DIC. Dealers may find no DTC’s present.

 

Cause

This could be caused by incorrect vehicle ride height variance due to an aftermarket lowering kit installed.

 


4 Affected Products

Vehicles

MAKEMODELYEAR
CADILLACeBayESCALADE2021
CHEVROLETSUBURBAN2021
CHEVROLETTAHOE2021
GMCYUKON2021

 


1 Associated Document

Manufacturer Communications

Bulletin No.: PIT5854
Published date: 09/21/2021

MC-10202399-9999.pdf 1397.865KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.33 MB]

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
maXpeedingrods 3” Front & 4" Rear Drop Lowering Kit for 2000-2006 GM Tahoe/Suburban/Avalanche Yukon/Yukon XL Escalade w/Torsion Keys Coil Springs
  • Fitment: For GMC Yukon 2WD / 4WD / AWD 2000-2006; For GMC Yukon XL 1500 2WD / 4WD / AWD 2000-2006; For Chevy Tahoe 2WD / 4WD / AWD 2000-2006; For Chevy Suburban 1500 2WD / 4WD / AWD 2000-2006; For Chevy Avalanche 1500 2WD / 4WD / AWD 2000-2006; For CadillaceBay Escalade 2WD / 4WD / AWD 2000-2006
  • Introduction: The kit can lower For Chevrolet / For GMC / For CadillaceBay SUV 2000-2006 using Drop Keys, Drop Rear Coils including Rear Shock Extensions . This kit will allow you to lower your SUV 2"-3" in the front and 4" in the rea
  • Feature: Durable powder coat finish Precision laser cut steel Easy to install
  • Package Includes: (Front) 1-3" Adjustable Drop Steel Torsion Keys (Rear) 4" Drop Coil Springs (3" Drop for Avalanche) (Rear) Powder Coated Shock Extenders Necessary hardware included
  • Note: The longer spring is for driver-side. Must have Torsion Key Front End.No instruction included, Contact us if you have any questions
Bestseller No. 2
Belltech 1020SP Lowering Kit for GM SUV W/Out Mag/Auto Ride 2-4F-4"R, 1 Pack
  • This kit includes Belltech part numbers 23323, 2410FF, 25004, and 2514
  • Specifically made for your vehicle for guaranteed fitment and drop will be 2-4" front and 3-4" rear
  • Included: Pro Coil Spring set, Shock Absorbers, Struts, and Drop Spindle Set
Bestseller No. 3
McGaughys 3/5 or 4/6 Adjustable Lowering Kit 2014 Chevy GM 1500 Truck 2WD All Cabs 34170
  • MUST HAVE CAST STEEL CONTROL ARMS, SEE CHART IN IMAGES FOR GUIDANCE
  • Includes: Drop Spindles, Front Adjustable Performance Struts, Rear Shocks, Rear Axle Flip Kit (Uses Factory U Bolts), Adjustable Rear Hangers, Shock Extenders, Rear Bump Stops, Hardware and Instructions
  • Includes: Spindles, Front Adjustable Performance Struts, Rear Shocks, Rear Axle Flip Kit, Adjustable Rear Hangers, Shock Extenders, Hardware and Instructions
Bestseller No. 4
maXpeedingrods 3” Front & 4" Rear Drop Lowering Kit for 2000-2006 GM Tahoe/Suburban/Avalanche Yukon/Yukon XL Escalade w/Torsion Keys
  • Fitment: For GMC Yukon/Yukon XL 1500 2WD/4WD/AWD 2000-2006; For Chevy Tahoe/Suburban/Avalanche 1500 2WD/4WD/AWD 2000-2006; For CadillaceBay Escalade 2WD/4WD /AWD 2000-2006
  • Introduction: The kit can lower For Chevrolet / For GMC / For CadillaceBay SUV 2000-2006 using Drop Keys, Drop Rear Coils including Rear Shock Extensions. This kit will allow you to lower your SUV 2"-3" in the front and 4" in the rear
  • Feature: Durable powder coat finish Precision laser cut steel. Easy to install
  • Package Includes: (Front) 1-3" Adjustable Drop Steel Torsion Keys (Rear) 4" Drop Coil Springs (3" Drop for Avalanche) (Rear) Powder Coated Shock Extenders Necessary hardware included
  • Note: The longer spring is for driver-side. Must have Torsion Key Front End.No instruction included, Contact us if you have any questions
Bestseller No. 5
Belltech 1019 Lowering Kit, 14-17 Gm Suv W/Mag/Auto Ride 2-3F-4 R
  • Available with or without shocks
  • Specifically made for your vehicle with guaranteed fitment
  • OEM ride quality with added performance, control and comfort
  • Premium hardware along with detailed instruction to insure you'll get the job done right the first time
Bestseller No. 6
Rough Country 2" Front 4" Rear Lowering Kit for 07-15 Chevy/GMC 1500 2WD - 72330
  • Drops the front 2" and the rear 4" for a level drop.
  • Maintains factory ride quality and uses N3 Performance Rear Shocks
  • Includes Grade 9 hardware and hardened washers.
  • Rear drop is adjustable between 4" and 4.5"
  • Backed by Rough Country's Limited Lifetime Replacement Warranty.
Bestseller No. 7
Coil-Over Kit, GM, 88-98 C1500, Front, Short Shock, Single Adj. 700 lb. Springs
  • Single Adjustable
  • Adjustable Ride Height: 0.0-2.0 in. Lowered Front
  • Spring Rate: 700 lbs./in.
  • Works with select aftermarket control arms only
  • Made in USA
Bestseller No. 8
McGaughys 3/5 or 4/6 Adjustable Lowering Kit 07-13 GM 1500 Truck 2WD All Cabs 34070
  • Spindles, Front Adjustable Performance Struts, Rear Shocks, Rear Axle Flip Kit, Adjustable Rear Hangers, Shock Extenders, Hardware and Instructions
  • Made from high-quality materials for ultimate durability
  • Manufactured to meet or exceed strict quality requirements
  • If you have any questions or need fitment information for your vehicle, please contact with us
Bestseller No. 9
maXpeedingrods 3" Front & 5" Rear Lowering Kit for Chevy C10/K5, for GMC C10/Jimmy 1973-1987 Drop Lowering Springs Coils Flip Kit
  • [Fitment] Lowering kit fits for Chevy C10/K5 1973-1987; for GMC C10/Jimmy 1973-1987
  • [3/5” Drop Kit] Not only gives your truck a sleek, aggressive look but also significantly improves handling, stability, and overall driving dynamics for an exhilarating ride experience
  • [Durable High-strength Steel] Powder-coated for corrosion resistance and long-lasting performance
  • [Complete Installation Package] The kit comprises 3” front spring coils and a 5” rear flip kit, meticulously engineered for effortless bolt-on installation, eliminating the need for any welding or cutting
  • [24/7 Customer Support] maXpeedingrods offers lifetime technical support and 1-year limited warranty for quality-related issues since the date of purchase. Feel free to contact us if you have any questions
Bestseller No. 10
maXpeedingrods 3” Front & 4” Rear Drop Coil Spring Lowering Kit for Chevrolet S10 V6/ Blazer for GMC Sonoma/Jimmy 2WD 1982-2004 with Block U-Bolt
  • [Application 1982-2004] Drop coil spring lowering kit fit for Chevrolet S10 V6 2WD; for Chevrolet Blazer 2WD; for GMC Sonoma 2WD; for GMC Jimmy 2WD. *Note: ONLY V6
  • [Strong Steel] High-strength steel drop coil springs and drop blocks have a great powder coating keeping this item from rust and corrosion for an extended lifespan
  • [Reduce Ground Clearance] Drop kit provides 3 inches of front lowering and 4 inches of rear lowering, effectively reducing suspension travel
  • [Performance Improvement] Lower center of gravity will aid cornering and improve overall performance. Plus, lowered trucks are more aerodynamic, which in turn makes them faster
  • [Premium Service] 1-Year limited warranty for quality-related issues (since the date of purchase) and lifetime technical support. We are committed to providing every customer with high-quality products. If you require any further information, feel free to contact us anytime

Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...