| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10187734
Manufacturer Communication Number: PIE0585A
Summary
This engineering information (EI) (Lite) closure ends the need for information from the field in regards to a concern with the appearance of the factory installed hood wrap or stripe.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| CHEVROLET | CAMARO | 2020-2021 |
SEOCONTENT-START
Subject: Engineering Information – Request for Pictures on Factory Installed (RPO DNS) Hood Wrap or Stripe Concern
This EI has been revised to end the need for information from the field. Please discard PIE0585.
Brand: Model: Model Year: VIN: Engine: Transmission:
from to from to
Chevrolet Camaro 2020 2021 Built After
January 1, 2020
— — —
If you encounter a vehicle with the above condition, refer to SI for further diagnosis.
Version 2
Modified Released September 25, 2020
December 04, 2020 – Ended the need for further information from the field.
1
SEOCONTENT-END
1 Associated Document
Manufacturer Communications
PIE0585A
Loading...
Reload document 
Open in new tab
| “This site contains affiliate links for which OEMDTC may be compensated” |
Bestseller No. 1
VViViD® Black True R Carbon Fiber Vinyl Wrap Roll with Air Release Technology (6 Foot by 5 Foot (Hood, Roof or Trunk Wrap Kit))
- This premium automotive vinyl by VViViD Vinyls is specially engineered for DIY'ers. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.
- At 3.9mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum.
- This product has built in VViViD Air Release, VViViD Resist, and VViViD Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality. See the product description below for the details about these technologies.
- Application: Dry. Adhesive : Solvent-based, repositionable, permanent adhesive. Life: This vinyl is expected to easily last 5-7 years outdoors.
- This Vinyl can be installed using 3M 94 Primer and 3M Edge sealer, these are not mandatory, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a ±1 inch discrepancy may occur.
Bestseller No. 2
VViViD Black Matte 5 Foot x 6 Foot Car Wrap Vinyl Roll with Air Release 3Mil
- This XPO line should be installed in a 65 and 72 degrees (F) heated area to avoid tearing or premature activation of the adhesive. Adhesive is best suited for gloss or painted surfaces. XPO will feel less tacky than other films to enable it's repositioning technology. For added tack, simply heat the film and press into place, this will cause adhesive to build tack up to 4x. For more information search vvivid xpo online!
- At 3.9mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum.
- This product has built in VViViD Air Release, VViViD Resist, and VViViD Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality. See the product description below for the details about these technologies.
- Application: Dry. Adhesive : Solvent-based, repositionable, permanent adhesive. Life: This vinyl is expected to easily last 5-7 years outdoors.
- This Vinyl can be installed using 3M 94 Primer and 3M Edge sealer, these are not mandatory, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a ±1 inch discrepancy may occur.
Bestseller No. 3
VViViD+ Honeycomb Matte Black Medium Pattern Car Wrap Vinyl (6ft x 5ft)
- VViViD+ Honeycomb Matte Black is a unique, ultra-modern design, combining a tough-looking grainy matte base, with a deep black gloss finish hex pattern. Guaranteed to turn heads.
- All VViViD+ films incorporate cutting edge technologies, such as VViViD Air Release, VViViD Resist, and VViViD Heat Fuse, enabling DIY'ers to wrap their car with professional quality results.
- New hybrid-elastic PVC formula allows for enhanced durability and stretch, as well as being self healing. Low-tack, pressure-sensitive adhesive makes installation faster and easier than ever.
- VViViD+ vinyl specifications: Application: Dry. Adhesive : Solvent-based, repositionable, permanent adhesive. Life: This vinyl is expected to easily last 5-7 years outdoors.
- VViViD+ vinyls can be installed using 3M 94 Primer and 3M Edge sealer. Though not mandatory, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl, or ruin the texture, unlike cheaper quality films. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a ±1 inch discrepancy may occur.
Bestseller No. 4
VViViD+ Forged Composite Carbon Patternless Car Vinyl Wrap Roll (6ft x 5ft, Black)
- The All-New Edition VViViD Vinyl Wraps feature an incredible re-design of almost every aspect of our already incredibly user-friendly vinyl!
- Incredibly realistic forged carbon finish gives you a look that you can't find anywhere else!
- New hybrid-elastic PVC formula allows for enhanced durability and stretch, as well as being self healing!
- Low-tack, pressure-sensitive adhesive adds an unparalleled level of playability and speed, especially on larger installations.
- Unique, air-release adhesive lining features a self-collapsing diamond pattern greatly reduces lifting and bubbling. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a ±1 inch discrepancy may occur.
Bestseller No. 5
Orion Carbon Fiber Hood 60" x 80" Wrap Film Twill Vinyl Sheet Roll - 3D Carbon Fiber
- These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish
- Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price.
- Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface
- Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres
- Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting.
Bestseller No. 6
VViViD XPO Black Carbon Fiber Car Wrap Vinyl Roll Featuring Air Release Technology (6ft x 5ft)
- This premium automotive vinyl is specially engineered for DIY'ers. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.
- At 3.9mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum.
- This product has built in Air Release, Resist, and Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality. See the product description below for the details about these technologies.
- Application: Dry. Adhesive : Solvent-based, repositionable, permanent adhesive. Life: This vinyl is expected to easily last 5-7 years outdoors.
- This Vinyl can be installed using 3M 94 Primer and 3M Edge sealer, these are not mandatory, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a ±1 inch discrepancy may occur.
Bestseller No. 7
VViViD+ Ultra Gloss Premium Vinyl Car Wrap Film (6ft x 5ft, Gloss Piano Black)
- Most Realistic Paint-Replacement: VViViD Vinyls presents the newest evolution in vinyl wrap technology. Our Ultra Gloss range is the result of years of research and development, culminating in an almost mirror-like Gloss that is virtually indistinguishable from a factory paint job.
- Premium Features: To achieve the Ultra Gloss look, VViViD re-designed every aspect of car-wrap vinyl from the ground up. The result is a range of films packed with new technologies to create a stunningly beautiful finish. Conventional vinyl wraps can look good, but Ultra Gloss takes it to the next level.
- Nano Air-Release Technology: Air-release channels built into vinyl adhesive can sometimes create irregularities in the surface, making for a less glossy finish. VViViD’s Ultra Gloss films are the only vinyls that utilize a micro air-release pattern so finely engineered that the result is an almost glass-like finish.
- Stretchable Protective Cap: Unlike other vinyls, VViViD’s Ultra Gloss comes with a protective film that stretches with the vinyl, so you don’t have to remove that protective layer until the installation is complete, reducing the risk of scratches and scuffs.
- VViViD Ultra Gloss vinyls are ready to use right out of the box, no liquids or messy, toxic chemicals needed. For the car enthusiast who demands next-level refinement, with beautiful colors and textures, look no further. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a ±1 inch discrepancy may occur.
Bestseller No. 8
Gomake Vehicle Vinyl Wrap Tool Kit Window Tinting Tool Include 4 Inch Felt Squeegee, Retractable 9mm Utility Knife and Blades, Zippy Vinyl Cutter and Mini Go Corner Squeegee for Car Wrapping
- MULTIFUNCTIONAL SET: A set of professional tool kit for both professional and DIY wrappers. Suitable for application of all types of window tint,decals,signs, wrap film and car vinyl cutting.
- FELT EDGE SQUEEGEE: Durable felt edge squeegee great for car vinyl wrapping, effectively remove bubbles and minimize scratches with soft felt edge.
- LONG SOFT BLUE SQUEEGEE: This is a special squeegee which can be used in plug the edge in some detail and fine area. It conforms the film more reliably into tricky areas like shallow recessed areas and bumpers and remove the bubbles effectively. Minimize scratches and reduce damage, scrape off the bubbles downright under the film, prevent glass,car paint and film.
- SAFETY VINYL CUTTER: The standard razor blade is encased in the plastic holder which allows excess film to be cut safely around a vehicle.Safe and easy to cut the vinyl into different size and shapes. Ideal for use in the warehouse or by sign makers and wide format printers.
- UTILITY KNIFE AND BLADES: Retractable 9mm stainless handle art knife with 10pcs snap-off blades. Snap-off knife allows you to snap the dull blades off for a new sharp cutting tip to keep your blade always sharp.
Bestseller No. 9
VViViD® Satin Flat Matte Stealth Jet Black Vinyl Wrap Roll with Air Release Technology (6ft x 5ft (Hood, Roof or Trunk Wrap Kit))
- This premium automotive vinyl by VViViD Vinyls is specially engineered for DIY'ers. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.
- At 3.9mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum.
- This product has built in VViViD Air Release, VViViD Resist, and VViViD Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality. See the product description below for the details about these technologies.
- Application: Dry. Adhesive : Solvent-based, repositionable, permanent adhesive. Life: This vinyl is expected to easily last 5-7 years outdoors.
- This Vinyl can be installed using 3M 94 Primer and 3M Edge sealer, these are not mandatory, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a ±1 inch discrepancy may occur.
Bestseller No. 10
Black High Gloss Realistic Paint-Like Microfinish Vinyl Wrap Roll with VViViD XPO Air Release Technology (6ft x 5ft)
- This premium automotive vinyl by VViViD Vinyls is specially engineered for DIY'ers. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.
- At 4.3mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum.
- This product has built in VViViD Air Release, VViViD Resist, and VViViD Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality. See the product description below for the details about these technologies.
- Application: Dry. Adhesive : Solvent-based, repositionable, permanent adhesive. Life: This vinyl is expected to easily last 5-7 years outdoors.
- This Vinyl can be installed using 3M 94 Primer and 3M Edge sealer, these are not mandatory, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films. Please note that due to specific procedures in hand-rolling and hand-cutting our vinyl wrap product, a ±1 inch discrepancy may occur.
Last update on 2025-04-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
