NHTSA ID Number: 10198852
Manufacturer Communication Number: 19NA206
Summary
This service bulletin provides repair information to correct a customer concern of seeing an intermittent Shift to Park message displayed while vehicle is in Park.
Condition
Some customers may comment on seeing an intermittent Shift to Park message when the vehicle has been shifted into Park, and the ignition has been turned to the Off position.
Aside from seeing the message, technicians may find DTC B000A set.
Cause
The cause of the condition may be that the park switch in the transmission
control (shifter) assembly is not pulling the BCM signal low to electronically show that the vehicle is in the Park position.
Correction
Verify the condition and follow the steps in the Service Procedure below. R & R the transmission control, install a new shifter harness, then upon reinstalling the transmission control, install an In-line Shifter Wire Harness Jumper between the shifter base connector and the console harness connector.
Parts Information
| Causal Part | Description | Part Number | Qty |
| N/A | HARNESS ASM-A/TRNS CONT WRG | 84733196 | 1 |
| SWITCH ASM-A/TRNS CONT – (2016-2018 Malibu/Acadia/ Traverse) | 84955381 | 1 | |
| SWITCH ASM-A/ TRNS CONT – (2016-2019 Volt/ Camaro/ ATS/CTS) | 84955382 | ||
| SWITCH ASM-A/TRNS CONT – (2019 Acadia, Blazer, Traverse, Malibu, Holden Acadia) | 84955379 | ||
| COVER-A/TRNS CONT TR | 84955380 | 1 |
14 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| CHEVROLET | BLAZER | 2019 |
| CHEVROLET | MALIBU | 2016-2019 |
| CHEVROLET | TRAVERSE | 2018-2019 |
| CHEVROLET | VOLT | 2016-2019 |
| GMC | ACADIA | 2017-2019 |
1 Associated Document
Manufacturer Communications
Bulletin No.: 19-NA-206
Date: May, 2021
MC-10198852-9999.pdf 11798.643KB
NHTSA ID Number: 10187385
Manufacturer Communication Number: 19NA206
Summary
This service bulletin provides repair information to correct a customer concern of seeing an intermittent Shift to Park message displayed while vehicle is in Park.
1 Associated Document
Manufacturer Communications
Bulletin No.: 19-NA-206
Date: December, 2020
MC-10187385-9999.pdf 405.767KB
- MAINTAIN PEAK PERFORMANCE AND SAFETY ON THE ROAD - Easily find and fix the problem with your vehicle using the INNOVA 5610 bidirectional scan tool. This OBD2 scanner diagnostic tool provides real-time solutions to troubleshoot issues. Access OBD2 and OEM live data with ease, making it an essential car scanner diagnostic tool. Perfect for those seeking reliable car diagnostic scanner and code readers & scan tools for vehicles.
- PRO-LEVEL FUNCTIONALITIES - Use the INNOVA 5610’s Enhanced Data Stream to view live data for advanced systems like ABS, SRS, transmission, and engine. The Special Reset Function lets you use dealership-level re-learn procedures. This car diagnostic scanner is ideal for those needing a bidirectional scan tool or mechanic tools automotive for professional repairs. Compatible with select vehicle makes and models; not universal.
- COMMAND WITH BIDIRECTIONAL CONTROLS - The INNOVA 5610 bidirectional scan tool sends commands to test functions such as fuel pump on/off or retracting the electronic parking brake. With this car scanner diagnostic for all cars, you can operate like a pro. Ideal for those seeking a car code reader and reset tool or advanced fixd car diagnostic tool capabilities. Compatible with select vehicle makes and models; not universal.
- EASY TO USE - The INNOVA 5610 OBD2 scanner diagnostic tool supports English, Spanish, and French. Easily use this scanner for car on most 1996 - 2023 (2024 coming soon) OBD2 vehicles to verify repairs. Designed for ease of operation, it’s a dependable code reader for cars and trucks and check engine code reader. To confirm vehicle coverage, please utilize Innova's Coverage Checker.
- BUY AND DRIVE WITH CONFIDENCE - Backed by ASE-Certified support, this car scanner pairs with the RepairSolutions2 app, trusted by 4M users, for wireless OBD scanner functionality. With free updates and no subscription fees, this durable car computer diagnostic reader ensures you’re prepared for any repair. A must-have diagnostic scanner for vehicles.
- [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [Broad Make & Model Coverage] Strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW.
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [Broad Make & Model Coverage] Strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW.
SEOCONTENT-START
Service Bulletin Bulletin No.: 19-NA-206 Date: May, 2021 TECHNICAL Subject: Intermittent Shift to Park Message Displayed While Vehicle in Park, DTC B000A Set Brand: Model: Model Year: Date Breakpoint: Engine: Transmission: from to from to Chevrolet Blazer 2019 2019 SOP Prior to April 2, 2019 All All Malibu 2016 Traverse 2018 Volt 2016 GMC Acadia 2017 Holden Acadia 2019 Involved Region or Country North America, Russia, Middle East, Israel, Palestine, Chile, Colombia, Peru, GM Korea Company, Australia/New Zealand, Other Africa Condition Some customers may comment on seeing an intermittent Shift to Park message when the vehicle has been shifted into Park, and the ignition has been turned to the Off position. Aside from seeing the message, technicians may find DTC B000A set. Cause The cause of the condition may be that the park switch in the transmission control (shifter) assembly is not pulling the BCM signal low to electronically show that the vehicle is in the Park position. Correction Verify the condition and follow the steps in the Service Procedure below. R & R the transmission control, install a new shifter harness, then upon reinstalling the transmission control, install an In-line Shifter Wire Harness Jumper between the shifter base connector and the console harness connector. Page 2 May, 2021 Bulletin No.: 19-NA-206 Service Procedure 4489334 1. Remove the transmission control from the vehicle. Refer to Transmission Control Replacement in SI. 2. Remove the transmission control base plate, as necessary, and place the transmission control on a suitable work surface. 5682904 3. Move the shift rod out of Park position: 3.1. From the back side of the shifter, use a finger to depress the Brake Transmission Shift Interlock (BTSI) solenoid (1) and release the lock arm. 3.2. Depress the shift button (2) on top of the shifter. 3.3. Move the shift rod (3) forward out of Park, to allow access to Park Switch pins. 5682905 4. Remove the Park Switch Cover: Note: The slot (1) on top of the shift control allows easier access to the tab. 4.1. Use a pick, or screwdriver, to lift and release the rear most tab (2) of cover. 4.2. Release the lower front tab (3) next. 4.3. Release the top tab (4) last and remove the cover. 5682906 5. Using a pick or screwdriver, push the Park Switch pins (1) out of the shift control body, and release the Park Switch. Bulletin No.: 19-NA-206 May, 2021 Page 3 5682907 6. Using a pick or screwdriver, release and lift the Park Switch (1) out of the shift control body. 5682908 7. Use needle nose pliers to release the BTSI lock. 5682909 8. Using a pick or screwdriver, lift the BTSI solenoid (1) out of pocket in shift control. Page 4 May, 2021 Bulletin No.: 19-NA-206 5682910 Note: There are two styles of Tap Up, Tap Down connectors. One is nested (shown above), one is loose. 9. Using a pick or screwdriver, disconnect the Tap Up, Tap Down harness in the shift control assembly. 5682911 10. Using a pick or screwdriver, lift the Tap Up, Tap Down harness from the nest in the shift control assembly. 5682912 11. Carefully lift all wiring from the shift control assembly. Bulletin No.: 19-NA-206 May, 2021 Page 5 5682913 12. Carefully insert a pick or screwdriver between the shift control wire harness connector and shift control body, to release lock tab and lift up on connector and release. 5682916 13. The wire harness is now free from the shift control. 5682918 14. Start installation of the new shift control wiring harness: 14.1. Begin by inserting shift control harness connector into the shift control assembly. 14.2. Fit the wire harness below the retainer tab in the shift control assembly. 5682920 15. Push the Tap Up, Tap Down harness connector in the nest in the shift control assembly, and insert the Tap Up, Tap Down shift control harness connector. Page 6 May, 2021 Bulletin No.: 19-NA-206 5682922 16. Lay the BTSI solenoid and Park Switch on the shift control assembly, in the approximate location of installation. 5682925 Note: When installing, be sure to align the BTSI elbow connection so it fits in the BTSI lock release. 17. Install the BTSI solenoid in the slots with the coil side down. 5682928 18. Push the BTSI solenoid lock in place until it clicks. 5682930 19. Install the BTSI solenoid wiring and the Park Switch wiring: 19.1. Press the wiring for the BTSI solenoid and the Park Switch under the tabs on the body of the shift control assembly. 19.2. Press the Park Switch into place with the two alignment pins. 19.3. Put the shift control in the Park position. Bulletin No.: 19-NA-206 May, 2021 Page 7 20. Check the operation of the Park Switch: 5682931 20.1. Press the shift shaft release rod on the top of the shift control to open the Park Switch to verify it opens all the way and stays in place. 5682933 20.2. Release the rod and cycle a few times to ensure the Park Switch is fully seated and opening and closing properly. 21. Carefully install the Park Switch cover, being sure all three tabs lock in place. 4489334 22. Reinstall the transmission control assembly in the vehicle. Refer to Transmission Control Replacement in SI. 5404694 Caution: Ensure the jumper harness is not twisted or kinked. 23. Install the Jumper harness (P/N 84733196) between the shift control and the console body harness connector. 24. Start the vehicle and verify that the Shift to Park message is NOT displayed. Page 8 May, 2021 Bulletin No.: 19-NA-206 Parts Information Causal Part Description Part Number Qty N/A HARNESS ASM-A/TRNS CONT WRG 84733196 1 SWITCH ASMA/ TRNS CONT – (2016-2018 Malibu/Acadia/ Traverse) 84955381 1 SWITCH ASMA/ TRNS CONT – (2016-2019 Volt) 84955382 SWITCH ASMA/ TRNS CONT – (2019 Acadia, Blazer, Traverse, Malibu, Holden Acadia) 84955379 COVER-A/TRNS CONT TR 84955380 1, if necessary Note: Cover is NOT needed if step #4 is completed properly. Only order if damaged. Warranty Information Note: Specific to the Volt model, repairs are covered under the Voltec (Electric and Hybrid Vehicle) Warranty. For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Labor Operation Description Labor Time 5480908* Remove and Reinstall Transmission Control, Install New Shifter Harness, Add Wire Harness Jumper Blazer – 0.8 hr Malibu – 0.8 hr Traverse – 0.7 hr Volt – 1.1 hrs GMC Acadia – 1.4 hrs Holden Acadia – 1.4 hrs *This is a unique Labor Operation for bulletin use only. Version 8 Modified Released September 11, 2019 September 19, 2019 – Removed the Camaro model. October 14, 2019 – Updated the Warranty Information to add a Note for the Voltec Warranty. January 30, 2020 – Added a reference to DTC B000A in the Condition and added repair information to steps #4 and 8 of the Service Procedure. October 30, 2020 – Updated the Warranty Information with Add Times for Transmission Control Replacement. December 11, 2020 – Updated the Correction section, changed the complete Service Procedure, Parts Information and Warranty Information. February 05, 2021 – Removed the 2016 Volt Model and added a Note to the Cover listed at the bottom of the Parts Information table. May 19, 2021 – Added the 2016 Volt model.
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.