NHTSA ID Number: 10160985
Manufacturer Communication Number: PIC6362
Summary
This Preliminary Information communicates information on installing the rear spoiler on a ZR1 during PDI.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| CHEVROLET | CORVETTE | 2019 |
SEOCONTENT-START
Bulletin No.: PIC6362
Published date: 05/6/2019
Preliminary Information
PIC6362 Installing the Corvette ZR1 Rear Spoiler During a Pre Delivery Inspection (PDI)
Models
Brand: Model: Model Years:
VIN:
from to
Engine: Transmissions:
Chevrolet Corvette ZR1 2019 All All LT5
All
Involved
Region or North America Country
Condition Some dealership technicians may question the installation of the rear spoiler on the
Corvette ZR1 during the Pre Delivery Inspection (PDI).
This rear spoiler (in both street and track configurations) is attached to the vehicle using unique
Concern
fasteners. The vehicle is not shipped with the special bit that is needed to attach this spoiler
to the vehicle. The technician performing the PDI will be required to obtain the appropriate bit
to complete the installation.
Correction:
Please refer to the “Special Inspection Items” box at the bottom of the Pre-Delivery Inspection
Form for this vehicle. In this box, it refers the servicing technician to the July 2018 Techlink
for further information on this bit. In this Techlink edition, the information can be found by
searching the article titled, “2019 Corvette ZR1 Ground Effects Installation”.
For additional product information on the Corvette ZR1, please watch the 2019 Chevrolet Corvette
New Model Launch video on the GM Center of Learning website. It can be found under course number
10319.89W.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition
exhibited is resolved without completing every step, the remaining steps do not need to be
performed.
Version History
Version 1
Modified 05/06/2019 – Created on
SEOCONTENT-END
Bulletin No.: PIC6362
Published date: 05/6/2019
https://www.nhtsa.gov/recalls?nhtsaId=10160985
https://static.nhtsa.gov/odi/tsbs/2019/MC-10160985-9999.pdf
To View or Download this Document Click Here
MC-10160985-9999
- Fits ALL 2014-2019 Chevrolet Corvette C7 Wide Body Models ( Does NOT Fit Base & ZR1 Models )
- 100 % Brand New Condition, A Brand-New, Unused, Unopened, Undamaged Item in its Original Packaging (Where Packaging is Applicable).
- Package is Included with 1 X Corvette C7 ZR1 Style ABS Plastic Painted Carbon Flash Metallic Rear Upper Center Spoiler, 1 X Pair of Corvette C7 ZR1 Style ABS Plastic Painted Carbon Flash Metallic Rear Side Winglet ( Left & Right ), 1 X Corvette C7 ZR1 Style ABS Plastic Painted Carbon Flash Metallic Rear Lower Base Spoiler, 1 X Rear Tail Light ( Plug N Play Style - No Drilling is Required ), 1 X Bag of Installation Bracket ( Total 14 Pieces ) & 1 X Bag of Hardware
- This Spoiler Will Fit Perfectly on the Wide Body Models as It has been Modified & Shortened ( Will NOT Stick Out ). Installation Video & Hardware are Included
- Free Shipping For US 48 States With One Year Limited Manufacture Defective Warranty
- Fits ALL 2014-2019 Chevrolet Corvette C7 ALL Models
- 100 % Brand New Condition, A Brand-New, Unused, Unopened, Undamaged Item in its Original Packaging (Where Packaging is Applicable).
- Package is Included with 1 X Corvette C7 Z06 Stage 2 ABS Plastic Painted Carbon Flash Metallic Rear Center Base Spoiler, 1 X Pair of Corvette C7 Z06 Stage 2 Carbon Fiber Rear Spoiler Side Winglet ( Left & Right ), 1 X Corvette C7 Z06 Stage 3 Light Tinted Rear Center WickerBill Spoiler & 1 X Bag of Installation Hardware
- This Spoiler Will Fit Perfectly on the Base Models as It has been Modified & Shortened ( Will NOT Stick Out ). Installation Manual & Hardware are Included
- Free Shipping For US 48 States With One Year Limited Manufacture Defective Warranty
- Fits ALL 2014-2019 Chevrolet Corvette C7 Models
- 100 % Brand New Condition, A Brand-New, Unused, Unopened, Undamaged Item in its Original Packaging (Where Packaging is Applicable).
- Package is Included with 1 X Corvette C7 Z06 Stage 2 ABS Plastic Painted Carbon Flash Metallic Rear Center Base Spoiler, 1 X Pair of Corvette C7 Z06 Stage 2 Carbon Fiber Rear Side Winglet ( Left & Right ), 1 X Corvette C7 Z06 Stage 3 Smoke Tinted Rear Center WickerBill Spoiler & 1 X Bag of Installation Hardware
- This Spoiler Will Fit Perfectly on the Base Models as It has been Modified & Shortened ( Will NOT Stick Out ). Installation Manual & Hardware are Included
- Free Shipping For US 48 States With One Year Limited Manufacture Defective Warranty
- -Fitment: Compatible With ALL 2005-2013 Chevy Chevrolet Corvette C6 Models.
- -Style:H Style; Color:Carbon fiber painted; Made of high quality Plastic. Install with double sided tape.
- -Super easy installation. Stick it on your vehicle with the 3M tape we offer. Clean up the surface before installing it!!
- -Packing List:1 X Corvette C6 ZR1 Style Rear Trunk Lid Wing Spoiler. Including necessary hardware shown in the pictures.
- -The rear spoiler can effectively reduce the air resistance of the vehicle at high speed, improve traction and grip, thus improving driving stability. At the same time, the rear wing spoiler effect can save some fuel.
- Fit for 2020 2021 2022 Chevrolet Corvette C8 Models
- Made of ABS Plastic and the Surface Painted is Carbon Flash Metallic Black;100 % Brand New.
- Includes One Spoiler Wing,Mounted Harewre,Screws and Template Paper for Drilling Holes.
- Will Require Drilling if Car Does NOT Come With Factory Z51 Spoiler;Professional Installation Is Recommended
- Drastic Improvement to your car appearance, enjoy the enhancement of your car's performance, makes your appearance more fashionable
- Fit for 2020 2021 2022 Chevrolet Corvette C8 Models
- Made of ABS Plastic and the Surface Painted is Carbon Flash ;100 % Brand New.
- Includes One Spoiler Wing,Mounted Harewre,Screws and Template Paper for Drilling Holes.
- Will Require Drilling if Car Does NOT Come With Factory Z51 Spoiler;Professional Installation Is Recommended
- Drastic Improvement to your car appearance, enjoy the enhancement of your car's performance, makes your appearance more fashionable
- Compatible with 2014 2015 2016 2017 2018 2019 Chevrolet Corvette C7 ALL Models.
- Color: Black; Condition: Brand new; Made of superior ABS plastic for better performance and durability.
- The trunk Spoiler uses high-strength ABS plastic, light weight, strong and durable, wear-resistant and impact-resistant. And it uses aerodynamics to generate downward pressure on the car at high speeds, thereby offsetting some of the lift. Reduce the wind resistance coefficient, make the car close to the road, improve driving stability.
- Package include 1 X Trunk Spoiler; 1 X Pair of Corvette C7 Stage 2 Rear Side Winglet ( Left & Right ); 1 X Bag of Hardware. Instruction is NOT included!!! Professional installation is always highly recommended.
- If you didn't receive any replies from us for more than one business day, please check your spam because we will reply to every message our customers send and maybe our messages were sorted to spam, thank you very much.
Last update on 2023-05-21 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.
