“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161025
Manufacturer Communication Number: PIC6206C
Summary
This Preliminary Information communication provides information to the technician the step on diagnosing and repairing vehicles with inoperative Air conditioning, Instrument Cluster, OnStar, or other various electrical concerns. Technician may also find that fuses F35DA, F36DA, or the F37DA in the X51A Instrument Panel Fuse Block may not be powered up. Gain access to connector X201 and inspect connector for being properly aligned and the locking lever fully locked into place. Fully lock the connector and retest.
4 Affected Products
Vehicle
MAKE | MODEL | YEAR |
CHEVROLET | CRUZE | 2016-2019 |
SEOCONTENT-START
Bulletin No.: PIC6206C Published date: 05/17/2019
Preliminary Information
PIC6206C HVAC/Radio/IPC/Onstar Inoperative-Other Various Electrical Concerns
Product Investigation Review Required Models
Brand: Model: Model Years:
VIN:
from to
Engine: Transmissions:
Chevrolet Cruze Vin B 2016 All All
All All Chevrolet Cruze 2017 – 2019
All All All All
Supersession Statement
This PI was superseded to update Model Years. Please discard PIC6206B.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this
PI.
Condition / Concern
A customer may comment on one or more of the following;
Air conditioning is inoperative Radio will not turn on Instrument Cluster is inoperative OnStar
is inoperative
Other various electrical concerns
Upon a GDS2 Scan check, DTC’s U1510, U0155, U0184 may be stored along with no communication with
the A11 Radio, P16 Instrument Cluster, K33 HVAC Control Module, and the K73 Telematics
Communication Interface Control Module (VCIM).
A technician may also notice that fuses F35DA, F36DA, or the F37DA in the X51A Instrument Panel
Fuse Block may not be powered up.
Recommendations / Instructions
Inspect connector X201 for being properly aligned and the locking lever fully locked into place.
Warranty Information
For wiring repairs covered under warranty, please refer to latest version of bulletin 10-00-89- 005
for warranty information on wire/connector repairs.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition
exhibited is resolved without completing every step, the remaining steps do not need to be
performed.
SEOCONTENT-END
Bulletin No.: PIC6206C
Published date: 05/17/2019
https://www.nhtsa.gov/recalls?nhtsaId=10161025
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161025-9999.pdf
To View or Download this Document Click Here
Bulletin No.: PIC6206A
Date: Oct-2016
https://www.nhtsa.gov/recalls?nhtsaId=10119060
https://static.nhtsa.gov/odi/tsbs/2016/MC-10119060-9999.pdf
To View or Download this Document Click Here
PIC6206
May-2016
https://www.nhtsa.gov/recalls?nhtsaId=10078918
https://static.nhtsa.gov/odi/tsbs/2016/SB-10078918-7690.pdf
To View or Download this Document Click Here
“This site contains affiliate links for which OEMDTC may be compensated” |
- 16-22 AWG +16-14 AWG +12-10 AWG
- Color: Red Yellow Blue
- Standard crimp and then seal heat shrink butt connectors; Guaranteed to hold the strong crimps
- Dual-walled design, polyolefin tubing in outside and hot melt adhesive in inside
- Package Content: Red*40pcs+Blue*50pcs+Yellow*10pcs
- ✔️【PREMIUM QUALITY】Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for
- ✔️【DURABILITY】Each terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one seamless piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector
- ✔️【WATERPROOF】Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360 degree secure seal. It's flame-retardant, waterproof, and can be used underground
- ✔️【WIDE APPLICATIONS】Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly. The connector assortment includes red (AWG 22 – 16), blue (AWG 16 – 14) and yellow (AWG 12 – 10) butt connectors that can be used on wire AWG from 22 to 10
- ✔️【TICONN BRAND QUALITY COMMITMENT】We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 24-month warranty. 100% Satisfaction Guarantee for risk-free shopping!
- The UPC of the product is 805089657073
- This product is a lawn and garden tool accessories
- This product is manufactured in China
- 16-22 AWG +16-14 AWG +12-10 AWG
- Color: Red Yellow Blue
- Standard crimp and then seal heat shrink butt connectors; Guaranteed to hold the strong crimps
- Dual-walled design, polyolefin tubing in outside and hot melt adhesive in inside
- Package Content: Red*20pcs+Blue*20pcs+Yellow*10pcs
- ✅Marine Grade Butt Connectors: SVAAR Butt Connectors are crafted from high quality tinned copper and adhesive lined heat shrink tubing. These professoinal butt connectors ensure protection against the elements.
- ✅100% Annealed Copper: All SVAAR Electrical Connectors Are Made Of 100% Annealed Electrolytic Grade Copper.These Butt Splice Connectors Are Annealed To A Specific Temperature To Improve Material Properties And Better Crimping.Reduce The Risk Of Breaking During Crimping.
- ✅T2 Purple Copper Material:The SVAAR Butt Splice Connectors Are Made Of Low Resistivity T2 Purple Copper With Tin-Plated.Providing A High Degree Of Conductivity For Maximum Current Flow.Tin Coated Copper Connectors Are Ideal For Marine And Humid Environments Because The Tin Coating Protects The Butt Connectors From Oxidation And Corroding.
- ✅High-Quality Copper Core: Our heat shrink butt connectors are made of thick tinned copper barrel high-purity thick copper material. They have high conductivity and less heat, providing stable and efficient circuit transmission that is safe and reliable.
- ✅ Waterproof and Moisture-Proof: Heat shrink waterproof wire connectors provide insulation protection, double wall design, Hot Melt Adhesive inside ensures wires strongly connected and prevent wires slipping from the terminal, and have a longer service life. Sufficient polyethylene is used for 360-degree secure and sealed wire connections.
- ♥ PREMIUM COPPER CORE AND HEAT SHRINK TUBE: Made of high quality tinned copper and adhesive lined heat shrink tubing. These professoinal butt connectors ensure protection against the elements. Heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage, high thickness copper core ensure protection against the elements.
- ♥ STRONG CRIMPS - These butt connectors use thick, seamless copper barrels. Your wire will not pull out of these butt splices when crimping.
- ♥ EXCELLENT WIRE CONTACT - The copper barrel provides increased current flow, and ensures less voltage drop, preventing wiring failures and reducing equipment downtime.
- ♥ RELIABLE CONNECTION: Adhesive lined inside the 3:1 butt heat shrink connector will exude hot melt adhesive when evenly heated, shrinks quickly and adheres to wire insulation. Guarantees good environmental sealing, waterproof and wear-resistant.
- ♥ WIDE APPLICATIONS: Excellent stability, water resistance and electrical conductivity provide durable connection for motorcycle, off-road vehicles, lawn tractors,RVs,fish finder and marine application. Widely used on multiple projects of your Christmas lights,ships with high waterproof requirements motorcycle stereo, boat electronics, equipment switches.
- Tinned Copper Core: Butt connectors use a heavy-duty copper core, strong crimp, higher conductivity.
- Package Includes: 100 Blue heat shrink butt connectors that can be used on wire AWG from 16 to 14.
- Solderless Crimping: Insert the wires to be connected, crimp both sides with crimping pliers, and then heat with a heat gun.
- 3:1 Shrink Ratio: Marine grade heat shrink tubing provides high tensile strength and enough hot melt adhesive inside the tubing to ensure waterproof performance, your wires will never slip out of the wire connectors.
- Wide Application: Wire connectors are waterproof, stable, and corrosion resistant and are used in the automotive, marine, electrical, and electronic industries.
- The UPC of the product is 805089657011
- This product is a lawn and garden tool accessories
- This product is manufactured in China
- Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice
- For copper and/or aluminum cables
- 600 Volt maximum
- Clear point-of-purchase packaging
- UL listed
- Time Saver - solderless, crimpless, all you need is just a heat gun to finish the connection, much faster and easier than the old way.
- High Temperature Proof in A Short Time: use exclusive material in the butt connectors to avoid shrink tubing melting before solder ring.
- Insulated & Sealed: dual-walled design, polyolefin tubing provides Insulation & improve Pullout Strength.Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal.
- Fit for Confined and Narrow Spaces - can be bent after connection and no need to crimp or solder in the confined area, just control the temperature via a heat gun.
- Waterproof butt connectors - prevent wires from corrosion and can be widefy use on marine project.
Last update on 2024-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.