“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10154301
Manufacturer Communication Number: PIT5282E
Summary
This Preliminary Information communication provides information to the technician that a customer may request the factory Integrated Trailer Brake Control be bypassed and their aftermarket trailer brake controller be installed instead. Technician will need to gain access to the body harness. Install trailer brake controller harness General Motors part number 23184088 into Middle Bus Electrical Center (X61A).
Condition / Concern
Some customers may request to have an aftermarket trailer brake controller added to their vehicle, OR an aftermarket trailer brake controller added in lieu of the factory integrated trailer brake controller (ITBC) (RPO JL1).
Parts
Description | Qty | Part Number |
Trailer Brake Controller Harness | 1 | 23184088 |
52 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CADILLAC | ESCALADE | 2015-2019 |
CHEVROLET | SILVERADO 1500 | 2014-2018 |
CHEVROLET | SILVERADO 2500 | 2015-2019 |
CHEVROLET | SILVERADO 3500 | 2015-2019 |
CHEVROLET | SUBURBAN | 2015-2019 |
CHEVROLET | TAHOE | 2015-2019 |
GMC | SIERRA | 2017 |
GMC | SIERRA 1500 | 2014-2019 |
GMC | SIERRA 2500 | 2015-2019 |
GMC | SIERRA 3500 | 2015-2019 |
GMC | YUKON DENALI | 2015-2019 |
1 Associated Document
Manufacturer Communications
Bulletin No.: PIT5282E
Published date: 02/18/2019
https://www.nhtsa.gov/recalls?nhtsaId=10154301
MC-10154301-9999.pdf 377.415KB
NHTSA ID Number: 10137167
Manufacturer Communication Number: PIT5282D
Summary
This Preliminary Information communication provides information to the technician that a customer may request the factory Integrated Trailer Brake Control be bypassed and their aftermarket trailer brake controller be installed instead. Technician will need to gain access to the body harness. Install trailer brake controller harness General Motors part number 23184088 into Middle Bus Electrical Center (X61A).
1 Associated Document
Manufacturer Communications
Bulletin No.: PIT5282D
Published date: 03/1/2018
https://www.nhtsa.gov/recalls?nhtsaId=10137167
NHTSA ID Number: 10114805
Manufacturer Communication Number: PIT5282A
Summary
This Preliminary Information communication provides information to the technician that a customer may request the factory Integrated Trailer Brake Control be bypassed and their aftermarket trailer brake controller be installed instead. Technician will need to gain access to the X185 or the X138 connector (varies with vehicle build; refer to Service Information) near the underhood fuse block, terminal 32. Circuit 47 ends at the body harness side of X185 or X138 terminal 32, which comes from the X61A junction block. Obtain enough Dark Blue 12 gauge wire to run from X185 or X138 to the 7-way trailer connector at the bumper. Attach terminated lead part number 13327155 to one end of the Dark Blue and insert into the chassis harness side of the X185 or X138 connector terminal 32. Run the Dark Blue wire in its own conduit along the frame to the 7-way trailer connector at the bumper. Remove circuit 47 from the 7-way trailer connector terminal ?C? and tape the bare terminal and attach to the harness. Attach terminal part number 12110853, located in Delphi Tray 4, to the other end of the Dark Blue wire, with the correct weather pack seal, and insert it into the 7-way trailer connector terminal ?C.? Install trailer brake controller harness General Motors part number 23184088 into Middle Bus Electrical Center (X61A).
1 Associated Document
Manufacturer Communications
Bulletin No.: PIT5282A
Date: Dec-2014
https://www.nhtsa.gov/recalls?nhtsaId=10114805
MC-10114805-9999.pdf 456.395KB
NHTSA ID Number: 10111832
Manufacturer Communication Number: PIT5282
Summary
This Preliminary Information communication provides information to the technician that a customer may request the factory Integrated Trailer Brake Control be bypassed and their aftermarket trailer brake controller be installed instead. Technician will need to gain access to the X185 or the X138 connector (varies with vehicle build; refer to Service Information) near the underhood fuse block, terminal 32. Circuit 47 ends at the body harness side of X185 or X138 terminal 32, which comes from the X61A junction block. Obtain enough Dark Blue 12 gauge wire to run from X185 or X138 to the 7-way trailer connector at the bumper. Attach terminated lead part number 13327155 to one end of the Dark Blue and insert into the chassis harness side of the X185 or X138 connector terminal 32. Run the Dark Blue wire in its own conduit along the frame to the 7-way trailer connector at the bumper. Remove circuit 47 from the 7-way trailer connector terminal ?C? and tape the bare terminal and attach to the harness. Attach terminal part number 12110853, located in Delphi Tray 4, to the other end of the Dark Blue wire, with the correct weather pack seal, and insert it into the 7-way trailer connector terminal ?C.? Install trailer brake controller harness General Motors part number 23184088 into Middle Bus Electrical Center (X61A).
1 Associated Document
Manufacturer Communications
Bulletin No.: PIT5282
Date: Apr-2014
https://www.nhtsa.gov/recalls?nhtsaId=10111832
MC-10111832-9999.pdf 443.858KB
“This site contains affiliate links for which OEMDTC may be compensated” |
- A distinct, easy-to-read LCD display with multiple screen color options..Fit Type: Universal Fit
- Up-Front controls provide easy access to all P3 features.
- Easy to understand diagnostics show output current, battery, brake, and output voltage.
- A flashing red warning system alerts user to No Trailer Brake situations.
- Select Electric over Hydraulic or Electric trailer brake mode.
- PROPORTIONAL ELECTRIC BRAKE CONTROLLER: Provides automatic braking based on the intensity and rate at which you apply your tow vehicle’s brakes, thanks to an internal inertia sensor. This makes the Tekonsha BRAKE-EVN brake controller ideal in any braking situation
- EASILY INSTALL THANKS TO PLUG & PLAY: The BRAKE-EVN trailer brake controller has a Plug & Play port for two plug adapters and a removeable electrical connector so the unit can be easily unplugged
- EASY-TO-READ LED DISPLAY: Digital LED display shows settings, real-time diagnostics, and alerts
- MANUAL BRAKING AVAILABLE: If you ever need to manually apply the brakes, simply move the manual control lever to the left. The BRAKE-EVN will apply power to your trailer’s brakes up to the amount of power previously set
- VERSATILE: The BRAKE-EVN electric brake controller is compatible with a wide range of vehicles including Ford, GM, Chevy, Dodge, RAM, Toyota, Jeep, and more with 2, 4, 6, and 8 brakes (1-4 axles). Vehicle-specific Tekonsha Plug & Play brake controller wiring harness sold separately
- PORTABLE. The Echo trailer brake controller has a non-invasive install and is easily transferrable from one vehicle to another. It plugs into any 7-way connector, wirelessly links to your smartphone using Bluetooth
- SMARTPHONE-READY. The Echo brake controller wirelessly syncs with your Apple or Android phone, turning it into a brake controller interface with the Smart Control app (Warning: Avoid distracted driving. Only make adjustments when vehicle is stationary). Note: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings
- ZERO-TOOL INSTALL. Installing this trailer brake controller is as easy as plugging in a 7-way trailer wiring connector. It requires no tools, no extra wires and no hardware. A locking tab and strap keep it firmly connected. NOTE: Strap stored inside cap
- HIGHLY RESPONSIVE. Echo uses a triple-axis accelerometer to provide smooth, safe braking. It maintains responsive braking, even when your phone screen is locked, receives incoming calls or if the Bluetooth connection is lost
- VERSATILE. This electronic trailer brake controller easily transfers between vehicles and trailers and works on virtually any trailer with 1 to 2 axles (2 to 4 brakes). It is also fully compatible with cruise control, anti-lock brakes, low-voltage systems
- PROFESSIONAL TRAILER BRAKE CONTROLLER: We all know that brake controller is important for safe towing. The Briidea professional-grade brake controller provides you with the peace of mind to safely tow your trailer, without any concerns about braking. This greatly reduces the risk of accidents and damage to your vehicle
- TIME-DELAY TRAILER BRAKE CONTROLLER: Our time delay brake controller can activate the trailer brake by applying varying power within a set period of time, when the brake is activated, the LED display shows the gain setting at a glance to ensure your driving safety
- SAFETY PROTECTION & EASY TO USE: Our trailer brake controllers has advanced overcurrent protection, short circuit protection and fault detection for your road safety. With LED display, real-time display of your current Settings, output voltage and fault diagnosis, so that you can solve problems in a timely manner. Simple operation, just by adjusting the button or toggle the emergency manual switch can meet your traction needs
- EASY INSTALLATION: Including a mounting bracket and other accessories that can be installed in any position at any angle. Warm tips: it is recommended to place it under the dashboard to avoid the brake controller blocking your view while driving, allowing you to operate and monitor the activity of the trailer brake from the cab
- COMPATIBILITY: The trailer brake controller kit is compatible with any vehicle now your driving, designed to operate 1 to 4 braked axles (2- 8 brakes), ideal for light duty towing and Occasional towing, etc
- Rugged reliability meets everyday ease-of-use
- Perfect factory look with no more knee knocking
- Take full control when hauling
- Easy to install brake controller
- 【Intelligent braking】Proportional controllers are the safest and most responsive braking system you can install.Proportional trailer brake controllers automatically sense when your tow vehicle slows down or stops. This type of brake controller will replicate your own braking intensity for your trailer's brakes — whether you slow to a gradual stop or have to slam on your brakes.
- 【Easy to display】LED Digital display screens show the voltage delivery going from the brake controller to the trailer's brakes. Easy to read, easy to observe vehicle conditions in real time.In case of emergencies, make adjustments in time.
- 【Safer and more stable】Fits 1 to 4 axle (2 to 8 brakes) trailers to deliver a signal from your vehicle's brakes to your trailer,both quantity of braking power (result) and rate of the program (sync) can be adjusted to fit your inclination, the street conditions, and kind of trailer,increase the safety of driving.Requires no leveling.
- 【Quick installation and use】Wiring ports are available for vehicle-specific brake controller harnesses and provide a quick connection between the controller and the towing vehicle for quick and easy installation or removal.
- 【4 Wiring & Controls】BLACK-Vehicle Power, RED-Stop Light, WHITE-Vehicle Ground, BLUE-Trailer Brakes.
- Advanced brake technology that mirrors the braking of the tow vehicle for safe, smooth stops
- Works on trailers with electric or hydraulic brakes
- Digital power and 7 sensitivity settings with intuitive vertical manual slide
- Short proof protection for up to 8 trailer brakes
- Simple installation with separate components that mount wherever you want them and no tools or drilling required
- ☑【Widely Applicable】Our 90195 P3 electronic brake controller is compatible with Ford, Gm, Chevrolet, Dodge, Ram, Toyota, Jeep, SUV, truck, and more, suitable for various types of trailers such as small multi-purpose trailers, travel trailers, and large commercial trailers.
- ☑【Clear LCD Display Screen】The 90195 brake controller has an easy to read LCD display screen that can display information such as output current, battery, output voltage, diagnosis, and error codes. The screen information supports English, French, or Spanish.
- ☑【Boost Feature】The 90195 trailer brake controller offers three levels of boost pressure,you can customize the braking response based on the weight and braking characteristics of the trailer. The boost function can provide additional braking power.
- ☑【The Highest Quality Brake Controller Solution】The 90195 trailer brake controller is a complete package that provides 1-4 axis brake control, a compact and Dash hugging design, and highly advanced technology to help reduce speed and improve stability when towing or stopping.
- ☑【Good Service】We have a professional after-sales service team. If you have any questions about our 90195 trailer brake controller, please send us an email and we will reply to you within 12 hours. We offer a 2-year warranty, and if there are any malfunctions, you can contact us for a refund or resend a new one.
Last update on 2024-04-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin No.: PIT5282E Published date: 02/18/2019 Preliminary Information PIT5282E Procedure for Installation of an Aftermarket Trailer Brake Controller or In Lieu of Factory Trailer Brake Controller Models Brand: Cadillac Escalade Model: Model Years: 2015 – 2019 VIN: from to All All Engine: All All Transmissions: Chevrolet Chevrolet Chevrolet Chevrolet Chevrolet Chevrolet GMC GMC GMC GMC GMC Silverado 1500 Silverado Silverado LD Silverado 2500/3500 Suburban Tahoe Sierra 1500 Sierra Sierra Limited Sierra 2500/3500 Yukon Models 2014 2015 – 2018 2019 2019 2015 – 2019 2015 – 2019 2014 2015 – 2018 2019 2019 2015 – 2019 All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All All Supersession Statement This PI was superseded to add the 2019 models. Please discard PIT5282D. Condition / Concern Some customers may request to have an aftermarket trailer brake controller added to their vehicle, OR an aftermarket trailer brake controller added in lieu of the factory integrated trailer brake controller (ITBC) (RPO JL1). Recommendations / Instructions 1. Obtain a trailer brake controller harness, GM Part # 23184088, as shown below. 2. Connect the harness to the MID-BEC (X61A). The MID-BEC is located under the I/P to the left of the steering column. The harness connection point (1) is illustrated below. 3. The trailer brake controller harness consist of 4 blunt cut wires and a label that calls out the wire colors and each wire’s function, also shown below. Use these 4 blunt cut wires to connect to the aftermarket trailer brake control. Four Blunt Cut Wires Dark Blue Circuit 47 Brake Output To Trailer Red/Green Circuit 242 Battery Power (30 AMP) White/Blue Circuit 3691 Brake Signal Black Circuit 1050 Ground 4. Perform this step ONLY if equipped with RPO JL1 where the customer is requesting the factory trailer brake system be bypassed to add an aftermarket trailer brake controller. Locate connector X185 Or X138 (varies with vehicle build; refer to SI), which is near the underhood fuse block, terminal 32. Circuit 47 ends at the body harness side of X185 or X138 terminal 32, which comes from the X61A junction block. Obtain enough Dark Blue 12 gauge wire to run from X185 or X138 to the 7-way trailer connector at the bumper. Attach terminated lead part number 13327155 to one end of the Dark Blue and insert into the chassis harness side of the X185 or X138 connector terminal 32. Run the Dark Blue wire in its own conduit along the frame to the 7-way trailer connector at the bumper. Remove circuit 47 from the 7-way trailer connector terminal “C” and tape the bare terminal and attach to the harness. Attach terminal part number 12110853, located in Delphi Tray 4, to the other end of the Dark Blue wire, with the correct weather pack seal, and insert it into the 7-way trailer connector terminal “C.” Parts Information Part Number Description Qty 23184088 Trailer Brake Controller Harness 1 Warranty Information If the customer wishes to have an aftermarket brake controller installed in their vehicle, it would be considered as a Customer Pay option.
SEOCONTENT-END