“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10184116
Manufacturer Communication Number: PIC6163C
Summary
This Preliminary Information communication provides information to the technician about vehicles that have several fasteners, located on either side of the hood latch, appear to be loose. Do not tighten, or otherwise move these two fasteners. These fasteners are part of the front fascia support bracket. They have a preset gap by design, and they have Loctite applied to the threads of the fastener so that this preset gap does not change.
SEOCONTENT-START
Bulletin No.: PIC6163C
Published date: 11/16/2020
Preliminary Information
PIC6163C Normal Characteristic – Fasteners Under the Hood
Appear to be Loose
Models
Brand: Model: Model Years:
VIN:
Engine: Transmissions:
from to
Chevrolet Camaro 2016 – 2021 All All All All
Supersession Statement
This PI was superseded to update Model Years. Please discard all copies of PIC6163B.
Condition / Concern
Some customers / technicians may comment that several fasteners, located on either side of
the hood latch, appear to be loose.
These two fasteners can be seen in the two photos below.
The first photo shows both fasteners as a point of reference in relation to the hood latch.
The second photo is a close-up of these fasteners to clearly show the gap that exists
between the head of the fastener and the plastic trim panel underneath.
Customers may request, or technicians may take it upon themselves, to tighten these two
fasteners under the hood until they are fully seated.
They may believe that they were mistakenly left loose during assembly of the vehicle.
Recommendations / Instructions
IMPORTANT: Do NOT tighten, or otherwise move these two fasteners.
These fasteners are part of the front fascia support bracket.
They have a preset gap by design, and they have Loctite applied to the threads of the
fastener so that this preset gap does not change.
This component actually comes into the assembly plant preadjusted.
The plant does not adjust these fasteners when they install the assembly in the car.
These two screws are adjustable to allow for hood to fascia alignment, but they should only
be adjusted if the fascia is too high or too low in reference to the hood.
When these fasteners are adjusted, the vertical clearance of the front fascia to hood gap will
be changed.
SEOCONTENT-END
6 Affected Products
Vehicle
MAKE | MODEL | YEAR |
CHEVROLET | CAMARO | 2016-2021 |
NHTSA ID Number: 10113883
Manufacturer Communication Number: PIC6163A
Summary
This Preliminary Information communication provides information to the technician about vehicles that have several fasteners, located on either side of the hood latch, appear to be loose. Do not tighten, or otherwise move these two fasteners. These fasteners are part of the front fascia support bracket. They have a preset gap by design, and they have Loctite applied to the threads of the fastener so that this preset gap does not change.
1 Associated Document
Manufacturer Communications
Bulletin No.: PIC6163A
Published date: 04/28/2017
https://www.nhtsa.gov/recalls?nhtsaId=10113883
MC-10113883-9999.pdf 203.039KB
NHTSA ID Number: 10162123
Manufacturer Communication Number: PIC6163B
Summary
This Preliminary Information communication provides information to the technician about vehicles that have several fasteners, located on either side of the hood latch, appear to be loose. Do not tighten, or otherwise move these two fasteners. These fasteners are part of the front fascia support bracket. They have a preset gap by design, and they have Loctite applied to the threads of the fastener so that this preset gap does not change.
1 Associated Document
Manufacturer Communications
Bulletin No.: PIC6163B
Published date: 06/13/2019
https://www.nhtsa.gov/recalls?nhtsaId=10162123
MC-10162123-9999.pdf 944.046KB
1 Associated Document
Manufacturer Communications
Bulletin No.: PIC6163C
Published date: 11/16/2020
https://www.nhtsa.gov/recalls?nhtsaId=10184116
MC-10184116-9999.pdf 943.902KB
“This site contains affiliate links for which OEMDTC may be compensated” |
- 3-in-1 Ceramic formula that REPAIRS fine swirls and scratches, SEALS in protection giving a wet shine finish without the wax and actively REPELS water with the durable Ceramic Technology.
- The innovative Ceramic Technology and durability of a Sealant extends duration of water-beading and protection against water pooling and water damage up to one year .
- Now with Ceramic Technology for more water beading and protection, Nu Finish The Once A Year Polish & Sealant still contains absolutely no wax.
- Our formula brings shine back to your paint, polishes chrome, and helps to remove fine swirls and scratches in just one amazing formula.
- Polishing power helps remove minor scratches, rejuvenates paint shine and polishes chrome.
- EXCEPTIONAL RESULTS: Advanced technology formula provides a deep gloss and rich, swirl-free results
- NO MORE SWIRLS: Permanently removes swirls and light defects from all paint
- STUNNING SHINE: Produces deep reflections and high gloss
- EASY TO USE: Smooth buffing feel, easy wipe-off, and fast clean-up
- MULTIPLE WAYS TO APPLY: Formulated for use by Hand, DA Polisher, or Rotary Buffer
- REMOVE PAINT DEFECTS: The ultimate product for removing oxidation, scratches, water spots, and blemishes without scratching
- BEST CAR SCRATCH REMOVER: Cuts as fast as harsh abrasives restoring surface clarity without scratching or swirling
- SAVES TIME: The clear coat safe formula dramatically reduces the time and effort to restore abused or neglected paint finishes
- STUNNING FINISH: Exclusive micro-abrasive technology leaves a "like new" finish and adds gloss in one easy step
- SAFE FOR CLEAR COAT: Safe and effective on clear coat and single stage paints, and can be applied by hand or dual action polisher like Meguiar's MT300 Dual Action Polisher
- Nu Finish Liquid Car Polish keeps your car exterior looking new with only one application per year.Fit Type: Universal
- Delivers impressive shine and protection without rubbing or buffing
- As the only polish available with no wax, the Nu Finish formula is specifically made to protect your car’s paint and clear-coat finish
- Perfect for use on cars, fiberglass boats, RVs, and even chrome surfaces
- Apply polish with a damp cloth, let dry to a haze, and wipe off
- CORRECT & PROTECT … 3D Speed is a premium all in one clear coat car polish & wax all in one bottle!
- BRING YOUR PAINT BACK TO LIFE … 3D Speed is an excellent scratch and swirl remover polish and sealant that deliver minor paint correction for small or large surface areas! Please note: Our products will not remove deep scratches or correct areas where paint may be missing.
- DEPTH AND GLOSS IN ONE … Restore your paint's color, depth and gloss while also adding a long lasting wax layer protection to the surface!
- EASY APPLICATION … You can easily apply 3D Speed by hand for smaller surface areas or with a polisher or buffer for larger areas with more imperfections.
- PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience a car polish and wax that's tried and trusted. Date on bottles reflect manufactured dates, not expiry dates.
- The polish gives deep reflections & a hi-gloss paint finish
- Eliminates fine swirl marks
- Conditioning oils add depth of colour and maximum gloss prior to waxing, especially on dark coloured cars
- Quickly and gently removes fine swirls and towel marks for mirror-like reflections
- Safe and on all glossy paints, including clear coats.Pre-waxing glaze that prepares the surface for wax while offering deep reflections and high gloss
- Gold Class premium wax with a luxurious carnauba-polymer blend gives your paint finish strong, long-lasting wax protection with a brilliant reflective shine
- Special blend of carnauba wax with protecting polymers is safe and effective on clear coats and all glossy paint types
- This liquid wax features an improved formula that creates an even richer shine and leaves a deeper gloss with sharp, clear reflections
- Easily glides on and off with included high-quality soft foam applicator
- Can be applied by hand or with DA polisher like Meguiar's MT300 Dual Action Polisher
- Advanced Formula 3-in-1. Our fortify quick coat is your all-in-one ceramic coating hydrophobic spray. Shine Armor Fortify Quick Coat ceramic car wax provides a waterless wash, coat, and shine, all-in-one convenient product.
- No Streaking, Smearing Or Scratching. Shine Armor Fortify Quick Coat premium formula ceramic car coating is a gentle and effective car polish for any vehicle! Get a clean, shiny finish without hurting your car's paint.
- Cuts Dirt, Grime & Grease. Our Quick Coat ceramic wax car sealant eliminates dirt, grime & grease instantly! Our signature 3-in-1 formula gives you a waterless car wash, coat and shine for a clean, showcase look.
- Safe For All Surfaces. Use this car wax spray-on automobiles, boats, motorbikes, RVs, four-wheelers and more! This spray wax is the perfect blend of surfactants and SiO2 ceramic-coating science.
- Superior Products. This means superior shine for your cars! Our ceramic quick coat also works as a sealer to give your vehicle a clear shield of protection while also providing a beautiful gloss. Our ceramic coat is the best hydrophobic car spray available!
- Heavy duty paste that cleans dull, oxidized finishes
- Quickly and easily penetrates through the oxidized surface to remove scratches, blemishes and stubborn stains
- Restores faded finishes
- Recommended for rubbing down between coats of newly sprayed lacquer and acrylic car finishes
- Easy to use formula
- UNSURPASSED SLICKNESS – You simply have to touch it to believe how slick this finish is
- MAXIMUM GLOSS AND SHINE – Hands down the highest level of gloss and shine you will ever experience; Achieve mirror-like results in a simple application, right in your own driveway
- EXTREMELY HYDROPHOBIC – Cerakote's true ceramic technology repels water, road grime, mud and dirt making your car stay cleaner, longer!
- QUICK AND EASY TO APPLY - Simply wash and dry your vehicle as you normally would; Then evenly spray a light coat directly to a panel or small area of your vehicle;, then, just lightly buff the coating to an incredible shine! It really doesn't get any easier than this!
Last update on 2024-06-06 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.