“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10113563
Manufacturer Communication Number: PI1422
Summary
This preliminary informational bulletin provides repair information to correct a customer concern on an intermittent crank/no start in cold climate conditions, or a technician finding DTC P1682 set as current or in history.
9 Affected Products
Vehicles
MAKE | MODEL | YEAR |
BUICK | VERANO | 2012-2015 |
CHEVROLET | CRUZE | 2011-2015 |
Condition/Concern
Intermittent crank/no start in cold climate conditions.
When checking the vehicle for DTCs, the ECM may report P1682 set as current or in history.
This condition may be caused by excessive resistance across the KR75 Engine Controls Ignition Relay contacts due to frost build-up.
Part Number | Description |
13595908 | RELAY |
NHTSA ID Number: 10113563
Manufacturer Communication Number: PI1422
Summary
This preliminary informational bulletin provides repair information to correct a customer concern on an intermittent crank/no start in cold climate conditions, or a technician finding DTC P1682 set as current or in history.
1 Associated Document
Manufacturer Communications
Bulletin No.: PI1422
Date: Feb-2015
https://www.nhtsa.gov/recalls?nhtsaId=10113563
MC-10113563-9999.pdf 231.536KB
“This site contains affiliate links for which OEMDTC may be compensated” |
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
- Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
- High switching capability: Normally open 40A/14V DC and normally close 30A/14V DC. Suitable for Nilight LED light bar wiring harness kit
- Premium quality: Durable relay and harness socket with 5 wires; Made by high-grade materials to ensure superior quality and long lifespan
- Male-female slot design: Unique male-female slot design, easy to connect the relay with harness socket, clean and neat after installation
- Easy wiring: The relay sockets come with different colors for loads/accessories, simple and convenient wiring
- Package include: 5 x relay and 5 x relay socket with wires.Fit type: Universal fit
- Assembled Relay Fuse Box: This automotive 12v relay box with wiring harness has high capacity holder box, package includes 5pcs 4Pin 40A JD1914 Relays and 1pcs 4 Pin RTT7121 Relay, 6pcs 5A, 10A, 15A, 20A, 25A, 30A blade fuses.
- Solid Material: Joinfworld 12V Fuse and Relay Box is made of high-quality nylon material flame retardant shell, each slot has a precise cutout, and an arc socket is reserved on the edge, so that all your wiring is neat and beautiful.
- Neat Wiring Harness: This 12v car relay fuse box has all the necessary wires pre-wired so you can connect directly to the vehicle, avoiding the hassle of wiring, it is more convenient for your installation and use.
- High performance: Joinfworld 12V Fuse and Relay Box comes with functional powerful insulation shell, with waterproof and dust-proof top cover and bottom cover, wire opening hole is the outlet of all wires, which can be well connected together for better waterproof dust fire prevention.
- Wide Application: The Automotive Relay Box suitable for all vehicles, 4X4 Offroad Jeep SUV UTV ATV RV Pickup Truck Trailer Camper Marine Boat, etc. For any problems, please do not hesitate to write to us.
- Brand new heavy duty SPST(Single Pole Single Throw) relays with color-labeled wires.
- Minimum operating voltage 8V, corresponding minimum operating current is 100mA; Standard operating voltage 12V, corresponding standard operating current is 150mA.
- Small size/Low power consumption/High contact voltage/ High sensitivity.
- Contact Material: Ag Alloy / Contact Resistance: ≤ 100MΩ.
- Life Expectancy Electrical: 100,000 Operation, Life Expectancy Mechanical: 10,000,000 Operation.
- Upgraded Version - Automotive relays built in fuse socket included 30A blade fuses with heavy duty 14AWG wires for main contact. No need of a separate fuse holder, saving space and money. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
- Mounting Design Feature - The interlocking mounting design of unique male and female slot on each socket edge, connect relays together and manage cables easily, offering clean and neat installation.
- Easy Wiring - The relay sockets come with color-labeled wires for load/accessories convenient wiring. Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87)
- Wide Application - Widely used in car keys power control, over-load protection, trunk release, polarity change, power door lock/actuator control, change a low current output to high current, add ignition/accessory outputs, control motors/other electronics etc.
- Set includes 5 relays, 5 relay harnesses, and 5 30A blade fuses. 2 Year Warranty by Nilight.
- Quality Materials: The shell is made of PA66 material and pure copper enameled wire, which has good thermal conductivity, can dissipate heat faster and reduce temperature rise. The compact and repairable structure of the sloped trim relay will hardly break or deform, helping you adjust and switch circuits stably.
- Plug and Play: Compatible with the most universal 12V 5-Pin automotive relay with a 40A switching capability. Easy to process your demand. Please check the dimensions and the direction of the poles carefully before ordering to avoid buying the incorrect product.
- Wide Application: Outboard tilt system application and all automotive devices equipped with a 12-volt dc power source car sound systems, security systems, compressor, air.
- Nice Replacement for Many Relays: The electrical relay box can be a nice replacement for 582195, 582472, 582473, 584416, 586147 and 586224, offering you a pleasant using experience.
- Sufficient Quantity for Using: The package comes with 4 pieces of automotive replacement electrical system relays, enough to meet your using and replacing demands in daily life, bringing you lots of convenience.
- Built in fuse socket with included 30A blade fuse with heavy duty 14AWG wires for main contact.
- Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
- 12VDC (14V Max) and 30A High Switching Capability.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87).
- Set includes 6 relays, 6 relay harnesses, and 6 blade fuses.
- 12V waterproof 5-Pin SPDT Relay Excellent waterproof and dustproof ability, high quality in any weather conditions
- 12V 5-Pin SPDT Relay Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87).
- SPDT Relay with 40A/30A High Switching Capability,it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated.
- 12v relays can operate with anywhere between 9v and 14v,Very suitable for 12V automotive, marine, and machine circuits.
- These 12V 5-pin relays are rated to handle 30A on normally closed pin 87a and 40A on normally open pin 87.
- User Manual available for download under Product Information Details
- Bosch style 12VDC (14V Max) 5-Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability.
- Interlocking design relay socket harness base for easy cable management & organization.
- Heavy duty 14AWG wires for the main contact and pre-wired with 6" pigtail leads.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Yellow - Output N/C (87a), and Blue - Output N/O (87).
Last update on 2024-04-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin No.: PI1422 Date: Feb-2015 Subject: Intermittent Crank/No Start with DTC P1682 Set Models: 2012-2015 Buick Verano 2011-2015 Chevrolet Cruze Attention: This PI also applies to any of the above models that may be Israel Export vehicles. Condition/Concern Some customers may comment on an intermittent crank/no start in cold climate conditions. When checking the vehicle for DTCs, the ECM may report P1682 set as current or in history. This condition may be caused by excessive resistance across the KR75 Engine Controls Ignition Relay contacts due to frost build-up. Recommendation/Instructions Buick Verano Relay Chevrolet Cruze Relay 1 If no other root cause is identified through normal diagnosis, replace the KR75 Engine Controls Ignition Relay (shown above) with the updated relay, P/N 13595908. Parts Information Part Number Description 13595908 RELAY Warranty Information For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Labor Operation Description Labor Time 5480058* Diagnosis and Replace the Engine Control Module Relay in the UBEC (KR75 Engine Controls Ignition Relay) 0.4 hr *This is an unique Labor Operation for Bulletin use only. It will not be published in the Labor Time Guide.
SEOCONTENT-END