“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10222826
Manufacturer Communication Number: 17-NA-221
Summary
This service bulletin provides repair procedures to correct customer concerns of Poor Engine Performance in Extremely Cold Weather Conditions for LE2 Engines, Charge Air Cooler (CAC) Icing – Malfunction Indicator Lamp (MIL) Illuminated.
Condition
Some customers may comment that when driving short distances and/or slow speed driving cycles, their vehicle experiences one or several of the following conditions within the first 10 to 15 minutes of vehicle operation in extremely cold weather conditions (-18°C or less / 0°F or less):
- Loss of power
- Smoke out the tail pipe
- Hesitation on acceleration
- Stalling condition
- Burning oil odor possibly caused by oil leak
- May also notice a Malfunction Indicator Lamp illuminated
- After driving for a period of time, the driveability issues seem to diminish.
This condition may also cause an increase in crankcase pressure, creating oil leaks at seals and gaskets.
The technician may find one or more of the following DTCs set:
- P0234
- P0236
- P0299
- P2227
- P00C7
Cause
This condition may be caused by ice accumulation in the charge air cooler (CAC), restricting air flow to the throttle body.
Correction
Important: The DTCs and symptoms above are not exclusively related to freezing/icing conditions. Only follow this bulletin when the condition is directly correlated with extreme cold of -18°C or less / 0°F or less. System leaks should always be ruled out first for P0299. Signs of moisture will always be present in the CAC system and are not a reliable indicator of freezing/icing.
If any of the above conditions are present, allow time for possible ice build up in the CAC to melt by allowing the vehicle to thaw in a warm climate.
If any of the conditions are validated to be caused by freezing/icing, verification of the following components is necessary on all U.S. and Canadian vehicles:
- Grille Winter Cover
- Modified Charge Air Cooler (CAC)
If the vehicle has a verified icing condition associated with extreme cold, but has all the components listed above installed, perform the Intake Air Pressure and Temperature Sensor Inspection and Cleaning and CAC drain procedures below.
If not previously performed, an oil change may be necessary to remove any moisture from the engine. Prior to the oil change, warm the engine up completely to melt any ice in the engine.
If there is a check engine light with a P0234 or P0299 DTC during cold weather driving, refer to Intake Air Pressure and Temperature Sensor Inspection and Cleaning below.
Note: Frozen oil/water contaminant in the turbocharger wastegate regulator solenoid valve (TCV) is often concurrent with vehicle operating conditions that cause CAC freezing. If DTC P0234 is set – Turbocharger Wastegate Regulator Solenoid Valve Inspection.
Important: For additional information on oil/moisture condensate freezing up in the turbocharger wastegate regulator solenoid valve, refer to Turbocharger Wastegate Regulator Solenoid Valve (TCV) Thermo-Wrap below.
Important: The new ECM calibration is only applicable for MY 2018, 2019 and 2021 vehicles with LE2 engines. In MY 2020 there was no LE2 engine.
Note: The Engine Control Module calibration should be updated. The new calibration will enable a revised transmission shift pattern during cold weather operation, which does not use overdrive as frequently. As a result, some customers may notice elevated engine RPMs during highway operation. This operating mode will reduce the potential for ice to build up inside the charge air cooler, and the potential for setting P0299 or P0234 diagnostic codes.
The customer must be informed by dealership personnel by explaining the new engine control module calibration and its effects on transmission shift patterns at highway speeds during cold weather to avoid a customer return to the dealership after the programming is completed.
Parts Information
Description | Model Year | Part Number | Qty |
Cooler, Charge Air | 2016-2020 | 42574036 | 1 |
2021 | Installed in Production | — | |
Cover, Grille Winter | 2016 | 42697326 | 1 |
2021–2022 (Trax) | 42697331 | 1 | |
2017-2022 (Encore) | 42697332 | 1 | |
Filter, Oil | 2016-2021 | Refer to the Electronic Parts Catalog (EPC). | |
Oil | |||
Wrap, Thermal | All | 25205589 | 1 |
8 Affected Products
Vehicles
MAKE | MODEL | YEAR |
BUICK | ENCORE | 2016-2019, 2021-2022 |
CHEVROLET | TRAX | 2021-2022 |
1 Associated Document
Manufacturer Communications
Bulletin No.: 17-NA-221
Date: October, 2022
https://www.nhtsa.gov/recalls?nhtsaId=10222826
MC-10222826-0001.pdf 558.735KB
NHTSA ID Number: 10205044
Manufacturer Communication Number: 17NA221
Summary
This service bulletin provides repair procedures to correct customer concerns of Poor Engine Performance in Extremely Cold Weather Conditions for LE2 Engines, Charge Air Cooler (CAC) Icing – Malfunction Indicator Lamp (MIL) Illuminated.
1 Associated Document
Manufacturer Communications
Bulletin No.: 17-NA-221
Date: August, 2021
https://www.nhtsa.gov/recalls?nhtsaId=10205044
NHTSA ID Number: 10154534
Manufacturer Communication Number: 17NA221
Summary
This technical bulletin provides a procedure to replace the CAC if it freezes in cold weather conditions causing engine power concerns.
1 Associated Document
Manufacturer Communications
Bulletin No.: 17-NA-221
Date: February, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10154534
MC-10154534-9999.pdf 11170.311KB
NHTSA ID Number: 10160108
Manufacturer Communication Number: 17NA221
Summary
This technical bulletin provides a procedure to replace the CAC if it freezes in cold weather conditions causing engine power concerns.
1 Associated Document
Manufacturer Communications
Bulletin No.: 17-NA-221
Date: April, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10160108
MC-10160108-9999.pdf 466.707KB
NHTSA ID Number: 10137568
Manufacturer Communication Number: 17NA221
Summary
This technical bulletin provides a procedure to replace the CAC if it freezes in cold weather conditions causing engine power concerns.
1 Associated Document
Manufacturer Communications
Bulletin No.: 17-NA-221
Date: April, 2018
https://www.nhtsa.gov/recalls?nhtsaId=10137568
MC-10137568-9999.pdf 2188.478KB
NHTSA ID Number: 10126091
Manufacturer Communication Number: 17-NA-221
Summary
This technical bulletin provides a procedure to replace the CAC if it freezes in cold weather conditions causing engine power concerns.
1 Associated Document
Manufacturer Communications
Bulletin No.: 17-NA-221
Date: July, 2017
https://www.nhtsa.gov/recalls?nhtsaId=10126091
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
- 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
- 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
- 【alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
- 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- 🚌【ABS OBD2 SCANNER】:The FX2000 diagnostic scanner for all vehicles can read and clear the Diagnostic Trouble Codes (DTC) data stream transmitted from the ABS. By retrieving the ABS code data, the obd scanner can check the various brake components and accurately diagnose problems.
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset and EPB service functions. this car scanner will help the part to operate normally after the faults repaired.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- SIMPLIFYING CAR REPAIR - Our goal is to simplify your car repair process. Our device turns your smartphone into a powerful OBD2 scanner diagnostic tool, allowing you to quickly understand your vehicle's problem, view recommended fixes, and purchase the necessary parts for repair.
- EXPERIENCE PROFESSIONAL DIAGNOSTICS - BLCKTEC's enhanced vehicle diagnostics gives you access to advanced features typically found only on high-end scanners. With our car code reader you can read and clear engine codes, ABS (brakes), SRS (airbags), TPMS codes, and many more.
- RELIABLE AND ACCURATE RESULTS - Our car scanner utilizes the latest OBD2 technology to provide accurate and reliable diagnostic information, ensuring that you can trust the results you receive.
- COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Our bluetooth OBD2 scanner works with most vehicles made after 1996, including cars, trucks, and SUVs, making it a versatile tool for any DIYer.
- USER-FRIENDLY APP - Our accompanying app is easy to use and navigate, with clear and concise information displayed in an easy-to-understand format. Available on IOS and Android.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- ABS/SRS OBD2 Scanner > Enjoy this ABS OBD2 code reader to reveal exact issues underlying in your brake, airbag, and engine systems, test individual ABS/SRS sensors, valves, or solenoids to quickly locate malfunctions (compatible with GM, Nissan, Fiat, Benz, Volvo, Land Rover, BMW, USA Ford, please reach us for details.), making sure critical safety systems work in perfect harmony together against accidents to be safe than sorry. NOTE: Only support upgrade on windows.
- 3 Most Needed Service Functions > This OBD2 scanner guides you through step by step procedures to reset oil service light and programmed mileage intervals for engine efficiency (Oil Reset); to calibrate steering wheel position for vehicle’s traveling in a straight line (SAS Reset); to clear the original low battery fault information against coming battery failures or damage (BMS Reset); saving your needless visits to mechanics. NOTE: Not suitable for all models, please reach us for compatibility.
- Full OBD2 Diagnostics > Say goodbye to the hassle of manual check-ups via this srs code reader. Quickly correct Check Engine Light warning on most OBD2/CAN compatible vehicles. Easily access to your smog status with one simple click I/M Readiness; and being filled with features for live data readings, freeze frame data, plus EVAP system, onboard monitor test means this scan tool checks all daily car care boxes.
- Work Easier > Red-Yellow-Green LEDs in this OBD2 scanner quickly show the overall DTC status without toggling through menu selections. HELP hotkey takes you directly to detailed descriptions/tips. Read/Erase DTC, I/M readiness shortcuts are added for optimized operation, along with DTC Lookup library for interpreting codes, designing the SRS OBD2 code reader a pleasure to use right out of the package even for beginners.
- Helpful Service > Get instant, free lifetime access to the most recent updates to add new car models and troubleshooting bugs making the OBD2 scanner a long-term investment for any home mechanics. The extended 1 years of quality assurance sweetens the worry-free deal even further. Multilingual Menu: EN, FR, ES, DE, IT, RU, PT, and JP. NOTE: Only support upgrade on windows.
- 【Multi-Function OBD2 Scanner】GODIAG GD203 code reader is a cost-effective products for your vehicle maintenance. This obd2 scanner does not only professional in checking the ABS/SRS systems, but also do a lot of special reset functions like Anti-lock Brake Reset, Electronic Park Brake Reset, Diesel Particulate Filter Reset, Oil Service Light Reset, TPMS, TPS/TBA, etc.
- 【ABS Bleeding Scan Tool】When the vehicle has replaced the ABS computer/ABS pump, replacing the brake master cylinder, brake cylinder, brake pipeline, and brake fluid, there may be air in the Car's ABS system. Our car diagnostic scanner can help you check for ABS bleeding, which you should perform the ABS bleeding to bleed the brake system to restore ABS braking sensitivity.
- 【ABS SRS Scan Tool】The function of airbags is to reduce the degree of injury to the people in the event of a vehicle collision. You need to check frequently whether the ABS SRS is functioning properly. Our code reader can help you find common airbag problems easily include: malfunctioning airbags, disconnected airbag wiring, and damaged airbag sensors.
- 【Oil Light Reset, EPA, SAS】If the brake pads are damaged, the brake pads should be replaced, and the brake pads need to be reset at the same time. When your car replaces the steering angle position sensor, the steering angle needs to be reset to find the relative zero where the car keeps driving straight. The oil light reset is required when the car oil or the mechanical parts that monitor oil life are replaced. Our obd2 scanner can do these jobs very well!
- 【Support 17 Languages and Multiple Car Models】Supported languages include English, Spanish, German, French, Portuguese, Swedish, Italian, Simplified Chinese, Traditional Chinese, Russian, Japanese, Korean, Hungarian, Thai, Slovak, Dutch and Polish. This is a car scanner tool for ABS and SRS systems that supports most types of cars on the market. (Please Note: 28 special functions are excluded!)
Last update on 2024-03-09 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Copyright 2022 General Motors LLC. All Rights Reserved. Service Bulletin Bulletin No.: 17-NA-221 Date: October, 2022 TECHNICAL Subject: Poor Engine Performance in Extremely Cold Weather Conditions for LE2 Engines, Charge Air Cooler Icing – Malfunction Indicator Lamp (MIL) Illuminated, DTC P0299, P0234, P2227, P00C7 Set Brand: Model: Model Year: VIN: Engine: Transmission: from to from to Buick Encore 2016 2019 2021 2022 — — 1.4L (RPO LE2) — Chevrolet Trax 2021 2022 Involved Region or Country North America Condition Some customers may comment that when driving short distances and/or slow speed driving cycles, their vehicle experiences one or several of the following conditions within the first 10 to 15 minutes of vehicle operation in extremely cold weather conditions (-18°C or less / 0°F or less): • Loss of power • Smoke out the tail pipe • Hesitation on acceleration • Stalling condition • Burning oil odor possibly caused by oil leak • May also notice a Malfunction Indicator Lamp illuminated • After driving for a period of time, the driveability issues seem to diminish. This condition may also cause an increase in crankcase pressure, creating oil leaks at seals and gaskets. Technicians may find one or more of the following DTCs set: • P0234 • P0299 • P2227 • P00C7 Cause This condition may be caused by ice accumulation in the charge air cooler (CAC), restricting air flow to the throttle body. Page 2 October, 2022 Bulletin No.: 17-NA-221 Correction Important: The DTCs and symptoms above are not exclusively related to freezing/icing conditions. Only follow this bulletin when the condition is directly correlated with extreme cold of -18°C or less / 0°F or less. System leaks should always be ruled out first for P0299. Signs of moisture will always be present in the CAC system and are not a reliable indicator of freezing/icing. If any of the above conditions are present, allow time for possible ice build up in the CAC to melt by allowing the vehicle to thaw in a warm climate. If any of the conditions are validated to be caused by freezing/icing, verification of the following components is necessary on all U.S. and Canadian vehicles: • Grille Winter Cover • Modified Charge Air Cooler (CAC) If the vehicle has a verified icing condition associated with extreme cold, but has all the components listed above installed, perform the Intake Air Pressure and Temperature Sensor Inspection and Cleaning and CAC drain procedures below. If not previously performed, an oil change may be necessary to remove any moisture from the engine. Prior to the oil change, warm the engine up completely to melt any ice in the engine. If there is a check engine light with a P0234 or P0299 DTC during cold weather driving, refer to Intake Air Pressure and Temperature Sensor Inspection and Cleaning below. Note: Frozen oil/water contaminant in the turbocharger wastegate regulator solenoid valve (TCV) is often concurrent with vehicle operating conditions that cause CAC freezing. If DTC P0234 is set – Turbocharger Wastegate Regulator Solenoid Valve Inspection. Important: For additional information on oil/moisture condensate freezing up in the turbocharger wastegate regulator solenoid valve, refer to Turbocharger Wastegate Regulator Solenoid Valve (TCV) Thermo-Wrap below. Important: The new ECM calibration is only applicable for MY 2018, 2019 and 2021 vehicles with LE2 engines. In MY 2020 there was no LE2 engine. Note: The Engine Control Module calibration should be updated. The new calibration will enable a revised transmission shift pattern during cold weather operation, which does not use overdrive as frequently. As a result, some customers may notice elevated engine RPMs during highway operation. This operating mode will reduce the potential for ice to build up inside the charge air cooler, and the potential for setting P0299 or P0234 diagnostic codes. The customer must be informed by dealership personnel by explaining the new engine control module calibration and its effects on transmission shift patterns at highway speeds during cold weather to avoid a customer return to the dealership after the programming is completed. Bulletin No.: 17-NA-221 October, 2022 Page 3 Important: Service agents must comply with all International, Federal, State, Provincial, and/or Local laws applicable to the activities it performs under this bulletin, including but not limited to handling, deploying, preparing, classifying, packaging, marking, labeling, and shipping dangerous goods. In the event of a conflict between the procedures set forth in this bulletin and the laws that apply to your dealership, you must follow those applicable laws. Important: Allow time for the vehicle to thaw in a warm environment to avoid damaging or breaking parts that may be required to be re-installed. Turbocharger Wastegate Regulator Solenoid Valve (TCV) Thermo-Wrap 3686945 1. Remove the turbocharger wastegate regulator solenoid valve (1). Refer to Turbocharger Wastegate Regulator Solenoid Valve Replacement in the Service Manual. 2. Drain the turbocharger wastegate regulator solenoid valve (TCV) by turning the valve upside down. Note: Check port #2 to assure the spring gets lifted off the seat. This will be determined by the compressed air not dead heading when applied to port #2. When applying air to this port a small amount of air should be observed at port #3 and even less air will be noticed at port #1. If this does not happen, the TCV plunger may have hardened deposits from hot operating conditions which will impede TCV plunger movement, and the turbocharger wastegate regulator solenoid valve should be replaced. 6055068 3. Using clean shop air regulated to 80-100 PSI, blow through all three ports (1, 2 & 3) for 5 seconds each. ⇒ Repeat step 3 twice. 6055077 4. Prior to reinstalling the TCV, pre-position the thermal wrap. This will aid in installation of the wrap once the TCV is reinstalled. Page 4 October, 2022 Bulletin No.: 17-NA-221 6046314 Note: The end result of the wrap, will surround the TCV as shown in the graphic above. 5. Install the TCV. Refer to Turbocharger Wastegate Regulator Solenoid Valve Replacement in the Service Manual. 6046334 6. Once the mounting bolt and hoses are properly installed, pull the lower portion of the wrap upward, and snap it into position. 7. Clear all DTCs using GDS and evaluate. Grille Winter Cover Installation Warning: Remove grille cover during temperatures above 32°F/ 0°C to prevent engine and transmission overheating. Remove grille cover before towing a trailer of any size. Failure to do so will decrease transmission cooling efficiency and possibly cause damage to the drivetrain. Note: The cover may appear to be undersized. The vinyl used may stretch during installation to ensure a tight fit. It is highly recommended that the cover be installed in a warm shop environment. 5197596 1. Using care, orientate the fascia winter cover to the bumper fascia. 5193266 2. Attach the cover to the fascia by pushing the hooks through the grille openings. 3. Validate that all the hooks are engaged and the cover is a tight fit. Bulletin No.: 17-NA-221 October, 2022 Page 5 Intake Air Pressure and Temperature Sensor Inspection and Cleaning Important: Only perform steps 1-5 if DTC P0299 is set. 4108751 1. Remove the turbocharger air pressure sensor (3). Refer to Intake Air Temperature Sensor Replacement in SI. 4910683 Page 6 October, 2022 Bulletin No.: 17-NA-221 Important: Due to the sensitivity of the sensor, Do Not use any chemical cleaners including water and Do Not use compressed air to remove contaminates. 2. Inspect the sensor for any contaminates. 5020216 3. Allow time for any ice build-up to melt by placing the sensor port down. 4. Clean the sensor with a clean towel. 5. Install the sensor. Bulletin No.: 17-NA-221 October, 2022 Page 7 Service Procedure 2851444 1. Install the CAC (2). Refer to Charge Air Cooler Replacement in SI. Important: Do Not perform an oil change if the oil change was recently done. • If the oil change was recently done and no signs of moisture have been confirmed, Do Not proceed with procedure. • If the oil change was not previously done or moisture has been found in the oil, proceed with procedure. 2. If required, perform an oil change. Refer to Engine Oil and Oil Filter Replacement in the Service Manual. Engine Control Module Programming Important: Updated Engine Control Module calibration: The updated calibration will enable a revised transmission shift pattern during cold weather operation, which does not use overdrive as frequently. As a result, the customer may notice elevated engine RPMs during highway operation. This operating mode will reduce the potential for ice to build up inside the charge air cooler, and the potential for setting P0299 or P0234 diagnostic codes. Caution: Before downloading the update files, be sure the computer is connected to the internet through a network cable (hardwired). DO NOT DOWNLOAD or install the files wirelessly. If there is an interruption during programming, programming failure or control module damage may occur. • Ensure the programming tool is equipped with the latest software and is securely connected to the data link connector. If there is an interruption during programming, programming failure or control module damage may occur. • Stable battery voltage is critical during programming. Any fluctuation, spiking, over voltage or loss of voltage will interrupt programming. Install a GM Authorized Programming Support Tool to maintain system voltage. Refer to www.gmdesolutions.com for further information. If not available, connect a fully charged 12V jumper or booster pack disconnected from the AC voltage supply. DO NOT connect a battery charger. • Follow the on-screen prompts regarding ignition power mode, but ensure that anything that drains excessive power (exterior lights, HVAC blower motor, etc) is off. • Please verify that the radio time and date are set correctly before inserting USB drive into vehicle for programming, otherwise an error will result. • Clear DTCs after programming is complete. Clearing powertrain DTCs will set the Inspection/ Maintenance (I/M) system status indicators to NO. Page 8 October, 2022 Bulletin No.: 17-NA-221 Important: The service technician always needs to verify that the VIN displayed in the TLC left side drop down menu and the top center window match the VIN plate of the vehicle to be programmed prior to using Service Programming System 2 (SPS2) for programming or reprogramming a module. • For the TLC application, service technicians need to always ensure that the power mode (ignition) is “ON” before reading the VIN from the vehicle’s VIN master module and that they do not select a VIN that is already in the TLC application memory from a previous vehicle. • If the VIN that shows up in the TLC top center window after correctly reading the VIN from the vehicle does not match the VIN plate of the vehicle, manually type in the VIN characters from the vehicle VIN plate into the TLC top center window and use these for programming or reprogramming the subject module with the correct vehicle VIN and software and/or calibrations. • The Engine Control Module (ECM) is the master module (for VIP vehicles) that TLC reads to determine the VIN of the vehicle. If the VIN read from the vehicle by TLC does not match the VIN plate of the vehicle, the ECM also needs to be reprogrammed with the correct VIN, software and calibrations that match the vehicle’s VIN plate. • The Body Control Module (BCM) is the master module (for GEM vehicles) that TLC reads to determine the VIN of the vehicle. If the VIN read from the vehicle by TLC does not match the VIN plate of the vehicle, the BCM also needs to be reprogrammed with the correct VIN, software and calibrations that match the vehicle’s VIN plate. Bulletin No.: 17-NA-221 October, 2022 Page 9 Caution: Be sure the VIN selected in the drop down menu (1) is the same as the vehicle connected (2) before beginning programming. 5743643 Important: If the vehicle VIN DOES NOT match, the message below will be shown. 5877000 Page 10 October, 2022 Bulletin No.: 17-NA-221 5644477 5431207 Bulletin No.: 17-NA-221 October, 2022 Page 11 Important: Techline Connect and TIS2WEB screens shown above. Important: If the same calibration/software warning is noted on the TLC or SPS Summary screen, select OK and follow screen instructions. After a successful programming event, the WCC is located in the Service Programming System dialogue box of the SPS Summary screen. Document the WCC on the job card. No further action is required. Refer to the Warranty Information section of this bulletin. 1. Reprogram the ECM. Refer to K20 Engine Control Module: Programming and Setup in the Service Manual. 5644478 Page 12 October, 2022 Bulletin No.: 17-NA-221 5431209 Note: The screenshots above are an example of module programming and may not be indicative of the specific module that is being programmed. Module selection and VIN information have been blacked out. Important: To avoid warranty transaction rejections, you MUST record the warranty claim code provided on the SPS Warranty Claim Code (WCC) screen shown above on the job card. Refer to callout 1 above for the location of the WCC on the SPS screen. 2. Record the SPS Warranty Claim Code on the job card for warranty transaction submission. Parts Information Description Model Year Part Number Qty Cooler, Charge Air 2016-2020 42574036 1 2021 Installed in Production — Cover, Grille Winter 2016 42697326 1 2021– 2022 (Trax) 42697331 1 2017-2022 (Encore) 42697332 1 Filter, Oil 2016-2021 Refer to the Electronic Parts Oil Catalog (EPC). Wrap, Thermal All 25205589 1 Bulletin No.: 17-NA-221 October, 2022 Page 13 Warranty Information Important: Warranty coverage code E2 applies for this module programming event. ECM reprogramming is covered for 8 years/80,000 miles (U.S.) or 8 years/ 130,000 km (Canada). Note: Warranty Coverage Codes E, E1 apply to Labor Operation 4081728. For vehicles repaired under the Powertrain coverage, use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Labor Operation Description Labor Time 4081728* Charge Air Cooler Replacement 1.1 hrs Add IAPT Inspection 0.2 hr 0580398* Winter Grille Cover Installation 0.2 hr Add Oil Change 0.3 hr 4088298* Removal of Condensation from Turbocharger Wastegate Regulator Solenoid Valve and Install Thermal Wrap 0.3 hr 2888358* Engine Control Module Reprogramming with SPS for Encore/Trax 0.3 hr *This is a unique Labor Operation for bulletin use only. Important: To avoid warranty transaction rejections, carefully read and follow the instructions below: • The Warranty Claim Code must be accurately entered in the “SPS Warranty Claim Code” field of the transaction. • When more than one Warranty Claim Code is generated for a programming event, it is required to document all Warranty Claim Codes in the “Correction” field on the job card. Dealers must also enter one of the codes in the “SPS Warranty Claim Code” field of the transaction, otherwise the transaction will reject. It is best practice to enter the FINAL code provided by SPS/SPS2. Warranty Claim Code Information Retrieval If the SPS Warranty Claim Code was not recorded on the Job Card, the code can be retrieved in the SPS system as follows: 1. Open TLC/TIS on the computer used to program the vehicle. 2. Select and start SPS/SPS2. 3. Select Settings. 4. Select the Warranty Claim Code tab. The VIN, Warranty Claim Code and Date/Time will be listed on a roster of recent programming events. If the code is retrievable, dealers should resubmit the transaction making sure to include the code in the SPS Warranty Claim Code field. Page 14 October, 2022 Bulletin No.: 17-NA-221 Version 12 Modified Revised August 14, 2017 – Added engine RPO to Subject. Revised April 12, 2018 – Updated to 2018 model year and added breakpoint and IAPT information. Revised February 01, 2019 – Added the 2019 Model Year, an Important statement at beginning of bulletin, Grille Winter Cover Installation procedure and parts information, changed Intake Air Pressure and Temperature Sensor Inspection title to Turbocharger Air Pressure Sensor Inspection and updated Warranty Information. Revised April 09, 2019 – Added 2019 to the Model Years for the charge air cooler in the Parts Information. Revised February 12, 2021 – Added the 2020-2021 Model Years to Encore, added the Trax Model, removed the breakpoint date and updated the Model Years in Parts Information table. Revised August 05, 2021 – Added the 2022 Model Year, TVC information to the Correction section, Important statement to refer to PIP5812A under Turbocharger Wastegate Regulator Solenoid Valve Inspection section and Emission Warranty coverage statement to Warranty Information. Revised December 20, 2021 – Added a Note and Important in the Correction section, an Engine Control Module Programming section and ECM Programming Warranty Information. Revised January 14, 2022 – Updated information referencing PIP5812C in Correction section, updated the Warranty coverage Important statement and changed ECM Reprogramming to Bulletin Only Labor Operation. Revised May 27, 2022 – Removed PIP5812C information, added Information to Correction section, added first Important statement under Correction, added Turbocharger Wastegate Regulator Solenoid Valve (TCV) Thermo-Wrap section, added Thermal Wrap Part Number to Parts Information and Added TCV and Wrap Installation Labor Operation. Revised August 11, 2022 – Added a graphic to Step 3 under Turbocharger Wastegate Regulator Solenoid Valve (TCV) Thermo-Wrap section and a Note under Warranty Information. Revised September 28, 2022 – Replaced P0236 with P0234 and updated the Correction section information. GM bulletins are intended for use by professional technicians, NOT a “do-it-yourselfer”. They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information. WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END