“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10187755
Manufacturer Communication Number: 20NA064
Summary
This technical bulletin provides a procedure to replace the transmission range selector cable to correct a wind and/or white/static type noise heard near the transmission shifter.
3 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHEVROLET | EQUINOX | 2019-2020 |
CHEVROLET | EXPRESS | 2019 |
Condition
Some customers may comment on a wind and/or white/static type noise heard near the transmission shifter.
Cause
This condition may be caused by the transmission harmonics traveling through the transmission range selector cable, causing noise.
Correction
Replace the transmission range selector cable. Refer to Range Selector Lever Cable Replacement in SI.
Parts Information
Causal Part | Description | Part Number | Qty |
X | CABLE ASM-A/TRNS RANGE SEL LVR | 84835018 | 1 |
SEOCONTENT-START
Copyright 2021 General Motors LLC. All Rights Reserved.
Service Bulletin Bulletin No.: 20-NA-064
Date: February, 2021
TECHNICAL
Subject: Wind and/or White/Static Type Noise Heard Near Transmission Shifter
Brand: Model:
Model Year: Breakpoint:
Engine:
Transmission:
from to from to
Chevrolet
Equinox 2019 2020 – – –
Equipped with 6
SPD Automatic
Transmission
(RPOs
MNH, MNK)
Holden
Involved Region or Country
United States, Canada, Mexico, Middle East, Israel, Palestine, Argentina (Mercosur),
Brazil (Mercosur), Chile (West), Colombia (West), Ecuador (West), Paraguay (West),
Peru (West), Uruguay (West), GM Korea Company, Thailand (ASEAN), Australia/New
Zealand, Egypt, Other Africa
Condition Some customers may comment on a wind and/or white/static type noise heard near the
transmission shifter.
Cause This condition may be caused by the transmission harmonics traveling through the
transmission range selector cable, causing noise.
Correction Replace the transmission range selector cable. Refer to Range Selector Lever Cable
Replacement in SI.
Parts Information
Causal
Part
Description Part
Number
Qty
X CABLE ASM-A/
TRNS RANGE
SEL LVR
84835018 1
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation Description Labor Time
8460370 Range Selector Lever Cable Replacement Use Published Labor
Operation Time
Version 2
Modified Released June 04, 2020
Revised January 28, 2021 – Revised to add Keywords.
Keywords: Whistle, Whistling, Hiss, Buzz, Shifter,
Wind, Static and Tizzle
GM bulletins are intended for use by professional technicians, NOT a “do-it-yourselfer”. They are written to inform these
technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper
service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a
job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your
vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the
information.
WE SUPPORT VOLUNTARY
TECHNICIAN
CERTIFICATION
SEOCONTENT-END
1 Associated Document
Manufacturer Communications
Bulletin No.: 20-NA-064
Date: February, 2021
https://www.nhtsa.gov/recalls?nhtsaId=10187755
MC-10187755-9999.pdf 496.923KB
NHTSA ID Number: 10178265
Manufacturer Communication Number: 20NA064
Summary
This technical bulletin provides a procedure to replace the transmission range selector cable to correct a wind and/or white/static type noise heard near the transmission shifter.
1 Associated Document
Manufacturer Communications
Bulletin No.: 20-NA-064
Date: June, 2020
https://www.nhtsa.gov/recalls?nhtsaId=10178265
“This site contains affiliate links for which OEMDTC may be compensated” |
- Scope 2204A 2 channel 10 MHz, 8-bit oscilloscope with probes
- 10 MHz bandwidth
- 1 GS/s sampling
- Advanced digital triggers
- Arbitrary waveform generator
- Oscilloscope probes NOT included
- Oscilloscope probes NOT included
- Scope 2205A 2 channel 25 MHz, 8-bit oscilloscope with probes
- 25 MHz bandwidth
- 1 GS/s sampling
- Advanced digital triggers
- Arbitrary waveform generator
- Scope 2205A-D2 2 channel 25 MHz, 8-bit oscilloscope (no probes)
- 25 MHz bandwidth
- Advanced digital triggers
- Arbitrary waveform generator
- Serial decoding
- PC Oscilloscope 4 channels with FG/AWG, 25MHz, Includes probes
- 25 MHz Bandwidth
- 4 Channel Oscilloscope
- 14 ns Rise time (calculated)
- 500 MS/s Sampling rate
- 2.4MSa/s, 12bits;
- DAQ card function;
- Cost-effective 8 channels oscilloscope for vehicle testing;
- 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
- PicoScope 4444 Standard Differential Oscilloscope Kit
- PC Oscilloscope MSO 2 + 16 channels with FG/AWG, 50 MHz, with probes and accessories
- 50 MHz bandwidth
- 2+16 Channel Mixed-Signal Oscilloscope
- 2 Input Channels
- 7 ns Rise time (calculated)
- Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
- Highly Performance: 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.
- Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc
- Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
- Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.
Last update on 2024-06-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.