“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10163250
Manufacturer Communication Number: 19NA134
Summary
This informational bulletin informs the technician and provides a Service Procedure to correct a shifter sticking or Difficulty selecting Desired Gear condition, possibly caused when field action 14152 was previously performed.
19 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHEVROLET | MALIBU | 2004-2012 |
PONTIAC | G6 | 2005-2010 |
SATURN | AURA | 2007-2010 |
Parts
Adjuster-A/Trns RANGE SEL LVR CBL | 84523145 | 1 |
LOCK-A/Trns RANGE SEL LVR CBL ADJ | 23261490 | 1 |
SEOCONTENT-START
Service Bulletin Bulletin No.: 19-NA-134
Date: June, 2019
INFORMATION
Subject: Information on Shifter Sticking and/or Difficulty Selecting Desired Gear
Brand: Model:
Model Year: VIN:
Engine: Transmission:
from to from to
Chevrolet Malibu 2004 2012
Pontiac G6 2005 2010 Automatic
Saturn AURA 2007 2010
Involved Region or Country North America
Condition
Some customers may comment on the shifter sticking and/or that selecting the desired
gear is difficult.
Some technicians may find this after Field Action 14152 was performed.
Cause This condition may be caused by coolant spilling onto the transmission shifter cable at
the transmission, causing the material to degrade prematurely.
Information
Over time, if the grommet in the shifter cable from field action 14152 comes in contact
with coolant, it may break down causing the shift cable adjuster not to perform properly. If
the grommet has been found to be the cause of the concern, perform the Service
Procedure below.
Service Procedure
2492632
1. Remove the old shift cable adjuster (1) from the
transmission lever ball stud. Refer to Range
Selector Lever Cable Replacement in SI.
2. Utilizing a flat blade screwdriver, remove the old
shift cable adjuster from the shift cable and
discard.
Page 2 June, 2019 Bulletin No.: 19-NA-134
5358153
3. Slide the new cable adjuster (A) onto the plastic
toothed barrel feature on the shift cable until
seated (B).
5358198
Note: Ensure to snap the adjuster lock into its first
holding position, which allows for free movement of the
adjuster.
4. Slide the adjuster spring-loaded cover out of its
home position (C) and insert the adjuster lock into
the adjuster as shown (D).
5. Snap the new adjuster onto the transmission lever
ball stud.
6. Push down on the adjuster lock and confirm that
the spring-loaded cover fully returns to its home
position and completely covers the adjuster lock.
7. Perform a shift system evaluation and confirm that
all gears can be accurately obtained.
⇒ If required, perform a shift cable re-adjustment.
Refer to Range Selector Lever Cable
Adjustment in SI.
Bulletin No.: 19-NA-134 June, 2019 Page 3
Parts Information
Causal
Part
Description Part
Number
Qty
N/A Adjuster-A/Trns
RANGE SEL
LVR CBL
84523145 1
N/A LOCK-A/Trns
RANGE SEL LVR
CBL ADJ
23261490 1
Version 1
Modified Released June 14, 2019
SEOCONTENT-END
Bulletin No.: 19-NA-134
Date: June, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10163250
https://static.nhtsa.gov/odi/tsbs/2019/MC-10163250-9999.pdf
To View or Download this Document Click Here
“This site contains affiliate links for which OEMDTC may be compensated” |
- Backward compatible with previous Dexron automatic transmission fluids and can be used as a much-improved replacement for older vehicles/transmissions originally using previous Dexron fluids
- Improved performance over previous Dexron fluids in: friction durability, viscosity stability, aeration and foam control, and oxidation resistance
- Potential to enable improved fuel economy and longer transmission life
- Provides for extended drain intervals. Provides consistent shift performance, even in extreme conditions.
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Backward compatible with previous DEXRON automatic transmission fluids and can be used as a much-improved replacement for older vehicles/transmissions originally using previous DEXRON fluids
- Improved performance over previous DEXRON fluids in: friction durability, viscosity stability, aeration and foam control, and oxidation resistance.
- Designed for anti-wear protection and shear stability
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- FOR USE IN 95% of ATF VEHICLES INCLUDING MOST CVTs in operation with US registered light duty applications
- HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
- IMPROVE DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs
- ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations
- FULL SYNTHETIC FORMULA protects against engine breakdown better than conventional fluids
- Backward compatible with previous Dexron automatic transmission fluids and can be used as a much-improved replacement for older vehicles/transmissions originally using previous Dexron fluids
- Improved performance over previous Dexron fluids in: friction durability, viscosity stability, aeration and foam control, and oxidation resistance
- Potential to enable improved fuel economy and longer transmission life
- Provides for extended drain intervals
- Backward compatible with previous DEXRON automatic transmission fluids and can be used as a much-improved replacement for older vehicles/transmissions originally using previous DEXRON fluids
- Improved performance over previous DEXRON fluids in: friction durability, viscosity stability, aeration and foam control, and oxidation resistance
- Potential to enable improved fuel economy and longer transmission life
- Provides for extended drain intervals
- Premium synthetic blend formula exceeds DEXRON-III H requirements
- Outstanding sludge resistance provides superior transmission life
- Enhanced friction durability improves shifting performance
- Certified and approved by General Motors for all cars and trucks that require DEXRON -VI
- Also satisfied requirements of DEXRON, DEXRON-III H, III, IIE and II
- Package Dimensions: 6.096 H x 21.336 L x 11.43 W (centimeters)
- Country of Origin : United States
- Package Weight: 1.85 pounds
- Fit type: Vehicle Specific
Last update on 2024-04-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.