“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161894
Manufacturer Communication Number: 19NA085
Summary
This technical bulletin provides a procedure to replace the A/C compressor if found with 5 rib pulley and the cause of the customers concerns.
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHEVROLET | COLORADO | 2019 |
GMC | CANYON | 2019 |
Parts
Parts Information
Compressor Kit, A/C | 84635621 | 1 |
Tensioner, Drv Belt | 24585542 | 1 |
Belt, Gen & A/ C cmpr | 24580771 | 1 |
SEOCONTENT-START
Bulletin No.: 19-NA-085
Date: May, 2019
Service Bulletin
TECHNICAL
Subject: Diagnostic Tip for Vehicle Will Not Charge, Accessory Drive Belt Shredded, Crank/No Start, Battery Light On, Drive Belt Came Off, Noise Under Hood and/or Charge Lamp Illuminated on the Drivers Information Center (DIC)
Brand: | Model: | Model Year: | VIN: | Engine: | Transmission: | |||
from | to | from | to | |||||
Chevrolet | Colorado | 2019 | 2019 | LWN | ||||
GMC | Canyon |
Involved Region or Country | North America |
Condition | Some customers may comment on one or more of the following conditions:
• Vehicle won’t charge • Accessory drive belt shredded • Crank/No start • Battery light on • Drive belt came off • Noise under hood • Charge Lamp illuminated on the DIC |
Cause | This condition may be caused by the air conditioning compressor pulley having a 5 rib pulley, while the rest of the accessory drive system is set up for a 6 rib belt. |
Correction | Replace the Air conditioning compressor, accessory drive belt and belt tensioner.
⇒ Inspect all other accessory drive components and replace as necessary. |
Service Procedure
Refer to Air Conditioning Compressor Replacement and Drive Belt Tensioner Replacement in SI.
Parts Information
Causal Part | Description | Part
Number |
Qty |
X | Compressor Kit, A/C | 84635621 | 1 |
N/A | Tensioner, Drv Belt | 24585542 | 1 |
N/A | Belt, Gen & A/ C cmpr | 24580771 | 1 |
Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
Labor Operation | Description | Labor Time | |
4486008* | Air Conditioning Compressor and Belt Tensioner Replacement | 4.0 hr | |
*This is a unique Labor Operation for Bulletin use only. |
Version | 1 |
Modified | Released May 21, 2019 |
SEOCONTENT-END
Bulletin No.: 19-NA-085
Date: May, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161894
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161894-9999.pdf
To View or Download this Document Click Here
“This site contains affiliate links for which OEMDTC may be compensated” |
- For removing and installing serpentine belts on vehicles with spring-loaded belt tensioners
- Includes accessories for specific vehicle applications, including GM, Ford, Chrysler, SAAB, VW and Volvo.
- INCLUDES: Complete accessory kit included for multi vehicle applications
- COMES IN: Heavy duty blow molded case to keep set protected and organized
- EASY TO READ: Includes detailed usage instruction with photos
- Product type: SPORTING_GOODS
- Country of origin: China
- Releases tension on serpentine belts with spring loaded idler pulleys
- HANDLE: Cushioned red handle makes use of this tool simple and easy
- For removing or installing serpentine belts on vehicles with spring-loaded automatic belt tensioners
- Tool includes 24-in handle with 3/8-in square drive and 9-1/4-in adapter/extension with 1/2-in square drive
- Adapter fits on handle in 8 different positions
- For removing or installing serpentine belts on vehicles with spring-loaded automatic belt tensioners
- Includes 24 inch handle with 3/8 inch square drive
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley. Come with red storage case.
- Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination.
- Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots.
- Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 22 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters
- Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm.
- Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley
- Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access
- Includes Drive Tools: Long Bar, Special GearWrench Ratcheting Wrench, and 3/8inch, 1/2inch and 3/4inch Adapters
- Includes 6 Point Sockets: 13 millimeter, 14 millimeter, 15 millimeter, 16 millimeter, 17 millimeter, 18 millimeter and 19 millimeter
- Designed to provide access and leverage to hard to reach pulleys
- COMFORT: Dipped handle for comfort and secure grip
- Durable contruction
- Premium Quality: This adjuster pulley spanner is made of high quality cadmium plated steel, sturdy, corrosion resistant and durable.
- Special Design: Special low-profile, pin wrench compatible used to adjust the timing belt tensioner on a variety of late model VW engines. Special design allows the head to be mounted in three different orientations relative to the handle.
- 5 Variable Positions: In this tension pulley spanner, it with 5 variable positions, which can meet different usage requirements. The engine timing belt tensioner wrench retains the tensioner to allow for tightening of the tensioner nut.
- Practical Use: This engine timing belt tensioner wrench allows the head to be installed in three different directions relative to the handle. The engine timing belt tool also allows access in the narrowest environment and in the most types of vehicles.
- Wide Application: In this tension adjuster pulley wrench tool, Adjustable-angle pins engagse the offset center hub of the timing belt, tensioner pulley, allowing a wrench to be placed on the pulley lock nut, Suitable for both petrol and diesel applications.
- 【Suitable for】: Made of Cadmium Plated Steel, used to adjust the timing belt tensioner for vag- VW, for Skoda, for Seat engines
- 【Position Adjuatible】: The spacing of pins is 18mm (center to center), 5 variable positions for extra easy use
- 【Compatible】: Special low-profile, pin wrench compatible used to adjust the timing belt tensioner on a variety of late-model engines
- 【Special Design】: Allows the head to be mounted in three different orientations relative to the handle
- 【Widely Used】: This allows access in even the most confined environments and for the greatest variety of vehicles
- Premium Quality: This adjuster pulley spanner is made of high quality cadmium plated steel, sturdy, corrosion resistant and steady.
- Special Design: Special low-profile, pin wrench compatible used to adjust the timing belt tensioner on a variety of late model VW engines. Special design allows the head to be mounted in three different orientations relative to the handle.
- 5 Variable Positions: In this tension pulley spanner, it with 5 variable positions, which can meet different usage requirements. The engine timing belt tensioner wrench retains the tensioner to allow for tightening of the tensioner nut.
- Practical Use: This engine timing belt tensioner wrench allows the head to be installed in three different directions relative to the handle. The engine timing belt tool also allows access in the narrowest environment and in the most types of vehicles.
- Wide Application: In this tension adjuster pulley wrench tool, Adjustable-angle pins engagse the offset center hub of the timing belt, tensioner pulley, allowing a wrench to be placed on the pulley lock nut, Suitable for both petrol and diesel applications.
- 【 Fits】: Specialty tool for checking the serpentine belt Compatible for BMW MINI engines. Exclusively designed for MINI Cooper W11 engines. Replaces OEM number 118410 and 118470 .
- 【 Material 】: Made of steel construction , with red soft plastic coated non-slip grip handle. easy grip and no harm to your hand !
- 【 Features】: The serpentine belt removal tool is for easily replacing the belt.Rotates the belt tensioner to remove the belt from the pulley. Goes into narrow space for changing serpentine belt. Replacing the serpentine belt requires dedicated tool because of the limited access in a narrow engine compartment.
- 【 Package included】: 1x removal tool and 1x tensioner locking pin. Comes with a tensioner locking pin to help line up with the holes on the tensioner to ensure easier removal and installation.
- 【 100% Satisfaction service 】: If you're not 100% satisfied with our PRODUCTS, simply return it for a full refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase.Thank you.
Last update on 2024-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.