Heat Shrink Hose Clamp Information – 2019 Chevrolet Silverado 4500HD 5500HD 6500HD

NHTSA ID Number: 10162116

Manufacturer Communication Number: PIP5658

Summary

This Preliminary information communicates There may be a concern where coolant heat shrink clamps need to be replaced for a coolant leak and/or for a service repair. Difficult to get the heat shrink clamps? to seal the coolant hose. For locations that are  inaccessible to a heat gun,  use hose clamp p/n 1518389C1, torque @ 9-11 Nm (79 – 97 lb in).

 

3 Affected Products

Vehicles

MAKE MODEL YEAR
CHEVROLET SILVERADO 4500HD 2019
CHEVROLET SILVERADO 5500HD 2019
CHEVROLET SILVERADO 6500HD 2019


Bulletin No.: PIP5658
Published date: 06/10/2019

https://www.nhtsa.gov/recalls?nhtsaId=10162116

https://static.nhtsa.gov/odi/tsbs/2019/MC-10162116-9999.pdf

To View or Download this Document Click Here


 

Bestseller No. 1
Precision Brand M6S Micro Seal, Miniature All Stainless Worm Gear Hose Clamp, 5/16" - 7/8" (Pack of 10)
  • Series 300 stainless steel band helps provide resistance to corrosion in marine environments
  • Stainless steel screw resists corrosion
  • Miniature size for small hoses installed in confined spaces
  • Band width of 5/16" better fits small hoses than larger widths
Bestseller No. 2
Breeze Power-Seal Stainless Steel Hose Clamp, Worm-Drive, SAE Size 24, 1-1/16" to 2" Diameter Range, 1/2" Bandwidth (Pack of 10)
  • This product is easy to use and easy to install
  • For use in standard clamp applications
  • Fits pipe and hose
  • United states
SaleBestseller No. 3
LOKMAN Stainless Steel Hose Clamp, 2 Inch to 12 Inch Available for Selection Adjustable Duct Clamp
  • 304 STAINLESS STEEL HOSE CLAMP- The whole large duct clamp (including the band, housing and screw) are all made of premium 304 stainless steel. Durable, strong and rust resistant.
  • FLEXIBLE ADJUSTABLE SIZE RANGE- Each hose clamp sizes are flexible and ductile with wide adjustable size range. Secures ducting tightly in place.
  • WIDELY USE- Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor.
  • GREAT VALUE - LOKMAN large quantity set products achieve great favorable price. The large quantity, the more favorable price. You can't miss it if you need a large bunches.
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.
Bestseller No. 4
Selizo 12Pcs Hose Clamps, 4 Inch Hose Clamp 304 Stainless Steel Hose Clamps Duct Clamp Worm Gear Adjustable 91-114mm Hose Clamp, Fuel Line Clamp for Plumbing, Automotive and Mechanical Applications
  • PACKAGE INCLUDES: The stainless hose clamp kit comes with totally 12 pieces hose clamps with adjustable size range from 91 mm to 114 mm, perfect for hose outside diameter 91-114mm / 3.6-4.4 inch
  • 304 STAINLESS STEEL HOSE CLAMP -The hose clamp is made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use
  • FLEXIBLE ADJUSTABLE SIZE RANGE - The 4-inch hose clamps stainless steel can be adjusted from 91-114mm / 3.6-4.4 inch. Flexible and ductile for use
  • EASY TO INSTALLL AND REUSABLE - The stainless clamps designed with a worm gear mechanism to adjust the clamp's diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. The clamp hose also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long
  • WIDELY USED - The spring hose clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications
Bestseller No. 5
Hon&Guan 5" Stainless Steel Hose Clips Duct Clamps Adjustable Worm Drive Hose Clamp for Inline Duct Fan Pack of 2 (125mm)
  • Pack of 2.
  • For automotive, industrial and agricultural applications providing a tight seal.
  • Material:stainless steel; rust resistant.
  • 4 sizes available and easy to install.
  • Perfectly suited for ducting of your tumble dryer, bathroom or kitchen extractor fan, hydroponics, Inline extract fans, or coker hood.
Bestseller No. 6
XRPAOWA Hose Clamp, 304 Stainless Steel Clamps, 10 pcs/Pack, SAE 32 Worm Gear Hose Clamps, 1-9/16-Inch-2-1/2-Inch(40-63mm) (SAE 32)
  • XRPAOWA 10pcs/Pack SAE Size 32 Power Seal Worm Gear Hose Clamps.
  • PREMIUM QUALITY 304 Stainless steel hose clamp for resistance to scaling and corrosion.
  • STRONG DESIGN 1/2" Band Size, Minimum Diameter 1-9/16", Maximum Diameter 2-1/2".
  • EASY TO USE worm/gear (screw/band) tightens smoothly.
  • GENERAL USE in air and fluid line applications, Industrial, Marine, Electronic, HVAC and Automotive Applications, Plumbing and Home Improvement Markets. Hose clamps attach hoses to fittings to prevent flow leakage.
Bestseller No. 7
Cambridge Hose Clamps 24 Minimum Diameter 1 1/16 Inch Maximum Diameter 2 Inch 10 Pieces
  • Premium quality hose clamps are easy to use and provide a tight and secure hold; 1/2 inch band size minimum diameter 1 1/16 inch maximum diameter 2 inch exceeds 60 inch pounds of torque
  • Cambridge hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings; the standard hose clamps exceed 60 inch pounds of torque; cambridge hose clamps are the ideal choice for all forms of projects and applications requiring hose clamps
  • Series 2300 hose clamps are designed with a stainless steel band and housing and a zinc plated screw making them more economical than clamps made only with stainless steel
  • 10 pieces packed in a convenient storage box; for indoor and outdoor use
  • Cambridge performance driven high quality products are preferred by industry leaders
Bestseller No. 8
Deflecto Worm Drive Clamp, 3" Diameter, Metal (MC325)
  • Use to secure semi-rigid aluminum duct connections
  • Compatible with 3 - 8 in. diameter ducts
  • Metal construction
  • Adjusts with a screwdriver for a secure fit
  • Heavy-duty Adjustable Mechanism For Secure Fit
Bestseller No. 9
XRPAOWA Hose Clamp, 304 Stainless Steel Clamps, 12 pcs/Pack, SAE 24 Worm Gear Hose Clamps, 1-1/16-Inch-2-Inch(27-51mm)
  • XRPAOWA 12pcs/Pack SAE Size 24 Power Seal Worm Gear Hose Clamps.
  • PREMIUM QUALITY 304 Stainless steel hose clamp for resistance to scaling and corrosion.
  • STRONG DESIGN 1/2" Band Size, Minimum Diameter 1-1/16", Maximum Diameter 2".
  • EASY TO USE worm/gear (screw/band) tightens smoothly.
  • GENERAL USE in air and fluid line applications, Industrial, Marine, Electronic, HVAC and Automotive Applications, Plumbing and Home Improvement Markets. Hose clamps attach hoses to fittings to prevent flow leakage.
Bestseller No. 10
Precision Brand M16S Micro Seal, Miniature All Stainless Worm Gear Hose Clamp, 11/16" - 1-1/2" (Pack of 10)
  • Series 300 stainless steel band helps provide resistance to corrosion in marine environments
  • Stainless steel screw resists corrosion
  • Miniature size for small hoses installed in confined spaces
  • Band width of 5/16" better fits small hoses than larger widths

Last update on 2019-08-18 / Affiliate links / Images from Amazon Product Advertising API

Last update on 2019-08-18 / Affiliate links / Images from Amazon Product Advertising API

Leave A Comment

Your email address will not be published. Required fields are marked *

*