“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10114829
Manufacturer Communication Number: PIP5442
Summary
This Preliminary Information communication provides information to the technician about vehicles that have an exhaust leak, noisy exhaust, or noise mid-vehicle. Technician will need to check for an unseated pipe to pipe mid-joint connection. Technician will need to install new exhaust band.
28 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CADILLAC | ESCALADE | 2015-2017 |
CADILLAC | ESCALADE ESV | 2015-2017 |
CHEVROLET | SILVERADO | 2017 |
CHEVROLET | SILVERADO 1500 | 2014 |
CHEVROLET | SILVERADO 2500 | 2015-2016 |
CHEVROLET | SUBURBAN | 2015-2017 |
CHEVROLET | TAHOE | 2015-2017 |
GMC | SIERRA | 2017 |
GMC | SIERRA 1500 | 2014 |
GMC | SIERRA 2500 | 2015-2016 |
GMC | SIERRA DENALI | 2015-2016 |
GMC | YUKON | 2015-2017 |
GMC | YUKON XL | 2015-2017 |
Parts
Clamp Asm (2.75-in) (4.3L, 5.3L) | 1 | 20779889 |
Clamp Asm (3.5-in) (6.0L, 6.2L) | 1 | 20779890 |
SEOCONTENT-START
Bulletin No.: PIP5442
Date: Nov-2016
Subject: | Exhaust Leak, Noisy Exhaust, Rattle, Rumble and/or Noise Mid-Vehicle |
Brand: | Model: | Model Year: | VIN: | Engine: | Transmission: | ||
---|---|---|---|---|---|---|---|
from | to | from | to | ||||
Cadillac | Escalade Models | 2015 | 2017 | SOP | Current | 6.2 L86 | All |
Chevrolet | Silverado 1500 | 2014 | 2017 | SOP | Current | 4.3L LV3 5.3L L83 6.2L L86 | All |
Chevrolet | Suburban, Tahoe | 2015 | 2017 | SOP | Current | 5.3L L83 | All |
Chevrolet | Suburban 3500 | 2016 | 2017 | SOP | Current | 6.0 L96 | All |
GMC | Sierra 1500 | 2014 | 2017 | SOP | Current | 4.3L LV3 5.3L L83 6.2L L86 | All |
GMC | Yukon Models | 2015 | 2017 | SOP | Current | 5.3L L83 6.2L L86 | All |
Involved Region or Country | North America |
Additional RPO/s: | N/A |
Condition | Some customers may comment on an exhaust leak, noisy exhaust, or noise mid-vehicle. The noise may be described as a rattle or rumble. May be most noticeable on a cold start. |
Cause | This condition may be caused by an unseated pipe to pipe mid-joint connection as seen below |
Correction
Note: Ensure that the pipe flares remain fully seated to each other while tightening the clamp.
- Remove and discard the exhaust band (Norma) clamp.
- Install and position a new exhaust band (Norma) clamp to the pipe joint.
- Firmly push and maintain the pipes together while tightening the exhaust band (Norma) clamp bolt.
Tighten the clamp bolt to 30 Nm (22 lb. ft.).
Note: After the clamp is installed, it does not need to be perpendicular to the pipe. It is acceptable to have a pipe to pipe or clamp angle.
- Confirm that the clamp edges (both sides and all the way around the clamp) are fully seated on the pipe.
- Run the engine and inspect the clamp joint to ensure there are no leaks and that the condition is corrected.
Parts Information
Description | Part Number | Qty |
Clamp Asm (2.75-in) (4.3L, 5.3L) | 20779889 | 1 |
Clamp Asm (3.5-in) (6.0L, 6.2L) | 20779890 | 1 |
Warranty Information
Labor Operation | Description | Labor Time |
4050272 | Exhaust System Alignment | Use Published Labor Operation Time |
Version | 1 |
Modified |
SEOCONTENT-END
Bulletin No.: PIP5442
Date: Nov-2016
https://www.nhtsa.gov/recalls?nhtsaId=10114829
https://static.nhtsa.gov/odi/tsbs/2016/MC-10114829-9999.pdf
To View or Download this Document Click Here
“This site contains affiliate links for which OEMDTC may be compensated” |
- single 3" inlet/dual 2.5" outlet Glasspack Muffler
- Two 2.5" Mandrel-bent tailpipes, cut and swedged
- Two 3.5"x18" WELD-ON angle-cut chrome tips
- Multi-depth insulated hangers & muffler clamps
- Made of High Quality 304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability
- TIG welded CNC Machine Flange for Resistance Against Pressure and Corrosion
- 3" OD Inlet / 3" OD Main piping
- 4" OD Round Diagonal Cut Muffler Tip
- Dyno Proven to Instantly Increases 15 to 25 Horsepower or Low End Torque
- Installation Hardware Included
- Disclaimer* This product does not interfere with any portion of the vehicle’s emissions control systems; The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle; This product is in compliance with the Clean Air Act in full
- Welding not Required
- single 3"/dual 2.5" Flowmaster Super 10 Muffler
- Two 2.5" Mandrel-bent tailpipes, cut and swedged
- Two 3.5"x18" WELD-ON angle-cut chrome tips
- Multi-depth insulated hangers & muffler clamps
- Exhaust Tips compatible with Silverado 1500 2019 2020 2021 2022 2023 ,compatible with Sierra 1500 2019 2020 2021 2022 2023
- Replace Number :84434641 84434642 84667764
- Available in Red
- Durable Coating: The Surface Of The Product Has Gloss Red Coating, Which Not Only Improves The Appearance Of The Product, But Also Brings Better Anti-Corrosion And Rust Resistance
- One year warranty, contact us if you have any questions
- Disclaimer* This product does not interfere with any portion of the vehicle’s emissions control systems; The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle; This product is in compliance with the Clean Air Act in full
- Installation Hardware Included
- Welding not Required
- Disclaimer* This product does not interfere with any portion of the vehicle’s emissions control systems; The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle; This product is in compliance with the Clean Air Act in full
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Last update on 2024-03-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.