Rear Liftgate Will Not Open with Outside Handle – 2013-2014 Chevrolet Spark

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10113795

Manufacturer Communication Number: PI1317A

Summary

This preliminary informational bulletin provides repair information to correct a customer concern that the rear liftgate will not open with the outside handle.

 


Condition/Concern

Some customers may comment that the rear liftgate will not open with the outside handle.
This may be due to the liftgate latch release cable becoming separated from the outside handle.
Note: Liftgate latch cable CLIPS are not serviced separately.

 

Recommendation/Instructions

Replace the liftgate latch release cable with a new designed cable and the liftgate latch handle which comes with a new design cable clip.

Follow the instructions listed below:

1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement in SI.

Note: Notice the orientation of the cable for installation purposes.

2. Disconnect the cable from the outside handle.

3. Disconnect the cable from the liftgate latch.

4. Remove the liftgate handle. Refer to Liftgate Outside Handle Replacement in SI.

5. Install the cable to the latch and outside handle. Rotate the blue clip counterclockwise until the clip is fully engaged to the cable.

6. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement in SI.

 

Parts

CABLE ASM – L/GATE LAT 94532037
HANDLE, L/GATE O/S PULL 94522304

 


3 Affected Products

Vehicles

MAKE MODEL YEAR
CHEVROLET SPARK 2013-2014
CHEVROLET SPARK EV 2014

 


3 Affected Products

Vehicles

MAKE MODEL YEAR
CHEVROLET SPARK 2013-2014
CHEVROLET SPARK EV 2014

 


1 Associated Document

Manufacturer Communications

Bulletin No.: PI1317A
Date: Aug-2015

https://www.nhtsa.gov/recalls?nhtsaId=10113795

MC-10113795-9999.pdf 288.079KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [281.33 KB]

 


NHTSA ID Number: 10142216

Manufacturer Communication Number: PI1317

Summary

This preliminary bulletin provides a procedure to repair the outside door handle and the liftgate release handle lock release cable to correct the customers concern of the rear liftgate wont open with the outside handle.

 

1 Associated Document

Manufacturer Communications

Bulletin No.: PI1317
Date: September, 2014

https://www.nhtsa.gov/recalls?nhtsaId=10142216

MC-10142216-9999.pdf 411.723KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [402.07 KB]

 


NHTSA ID Number: 10137795

Manufacturer Communication Number: PI1317

Summary

This preliminary bulletin provides a procedure to repair the outside door handle and the liftgate release handle lock release cable to correct the customers concern of the rear liftgate wont open with the outside handle.

 

1 Associated Document

Manufacturer Communications

Bulletin No.: PI1317
Date: September, 2014

https://www.nhtsa.gov/recalls?nhtsaId=10137795

MC-10137795-9999.pdf 411.723KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [402.07 KB]

 


NHTSA ID Number: 10072530

Manufacturer Communication Number: PI1317

Summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

 

1 Associated Document

Service Bulletin Document

Bulletin No.: PI1317
Date: September, 2014

https://www.nhtsa.gov/recalls?nhtsaId=10072530

SB-10072530-0335.pdf 411.723KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [402.07 KB]

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
GOOACC 100PCS Nylon Bumper Fastener Rivet Clips 8mm Replacement for GM #21030249, Ford #N807389S VW Auto Push Pin Rivets Automotive Furniture Assembly Expansion Screws Kit
  • Great Material - These bumper clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • One Size Fits Most - Head Diameter: 20mm/ 0.8 inches; Stem Length: 22.8mm/0.9 inches; Fits Into: 8mm /0.3 inches hole. These universal push-type fastener clips will fit on most of auto parts with 8mm hole, hold your parts very tightly.
  • Push-type Design - Push in type, rivet post pressure expands legs for fast and tight fastening. easy to fasten Bumper Fender Flare and Mud Flap. Better replacement for original bumper and fender clips.
  • Multiple Use - Come with 100 pcs car fender clips that widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers rivet clips for exact replacement of worn, old, and broken retainers.
  • PACKAGE INCLUDE: 100PCS Fastener Rivet Clips
Bestseller No. 2
Rexka 30pcs Fender Flare Rocker Panel Moulding Clip 11547581 for GM Chevrolet Buick Cadillac GMC CT6 XT5 XTS Cruze Equinox Impala Silverado Traverse Acadia Terrain Canyon Sierra Wheel Flare Clips
Bestseller No. 3
UNIGT 3 in 1 GM A20991 Fender Liner Clips Compatible with 11589292 Bumper Fastener Rivet 21030249 Door Trim Panel 1605396/1595864 GMC Trucks Buick Plastic Push Pins
  • 40pcs GM body clips directly replace OEM NO 11589292 / A20991, will work perfectly for inner GM fender liner, wheelwell and under hood plastic panels
  • 40pcs GM push pin retainers directly replace OEM NO 21030249, 8mm universal push-type fastener clips use to hold plastic inner-bumper parts and exterior trim
  • 40pcs GM door trim panel directly replace OEM NO 1605396, 1595864, needed to replace after your take off the door panels because most of door clips would break or be mashed
  • 1pcs Fastener removal tool can be used on the clips around the body of your trucks, it made the job 100% simpler then trying to remove them with a flathead screwdriver or hand
  • Total 121pcs included 3 push-type plastic rivets with 1 fastener remover from one enclosed pack, allow you to quickly and easily to reinstall the plastic part on your truck and keep them handy in the glove box or console
SaleBestseller No. 4
GOOACC - GRC-33 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler
  • UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
  • SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
  • HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
  • MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
  • EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.
SaleBestseller No. 5
Nilight 100PCS Nylon Bumper Rivet Clips for GM 21030249 for Ford N807389S for Chrysler 6503598,1PC Bonus Fastener Remover
  • 【HIGHER QUALITY REPLACEMENT 】 - Replaces GM: 21030249; Ford: N807389S; Chrysler: 6503598
  • 【THE SAME SIZE & SHAPE AS ORIGINAL】 - Head Diameter: 20mm Stem Length: 20mm Fits Into 5/16" (8mm) Hole.These universal push-type fastener clips will fit on most of auto parts with 8mm hole, hold your parts very tightly.
  • 【STURDY AND DURABLE】 - Made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use
  • 【WIDELY USE】 - Commonly used for fitting side skirt, bumper, car fender, door trim panel, interior trim panel and various trim panels. They can be used on cars, truck, motorcycles, buses, trains, planes, caravans, etc.
  • 【PACKAGE INCLUDE】 - 100PCS Nylon Fastener Rivet Clips+1PC Bonus Fastener Remover.2 Years Warranty Honored by Nilight
Bestseller No. 6
Rexka 50pcs Bumper Cover Moulding Grille Retainer Clip Nut 11547341 Compatible with GM Buick Cadillac GMC ATS CT6 XT5 Camaro Cruze Silverado Tahoe Traverse Sierra
Bestseller No. 7
30Pcs Interior Trim Clips Moulding Fastener for 1994-2017 GM Car & Trucks Console Dash Retainer Clips, 15748479 1/2" X 5/8" Metal Grill Clips, Garnish Interior Trim Bezel & Scuff Plate Clips for GM
  • 【Specifications】Compatible with 1994-2017 GM; OEM: 15748479, 700-052, 11588650, 16662182; Size: 1/2in X 5/8in. (NOTE: Please check the part number or measure the diameter of the space before purchasing to ensure fitment. )
  • 【Material】These car garnish moulding fastener are made of high-quality metal, which is durable, wear-resistant and corrosion-resistant, and will not break easily during use, which is definitely cheaper than going to an auto parts store.
  • 【Use】These small metal clips can hold your parts very tightly, won't be loose as the time passing by and is easily removed without damaging it.
  • 【Application】This car console dashboard trim clips are widely used in metal defender door card Interior weatherstrip moulding.
  • 【Package】Included 30pcs grille clips, enough quantity to meet your needs. with a plastic storage box, easy storage.
SaleBestseller No. 8
GOOACC Universal Plastic Fender Clips,200 Pcs Push Bumper Fastener Rivet Clips with 6 Size Auto Body Retainer Clips Bumpers,Car Fender Replacement for GM, Ford & Ch
  • UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 6 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
  • SAVE TIME AND MONEY - You can find 200PCS automotive push type retainer kit and no need to go to a auto parts store to look for different fasteners.
  • HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
  • MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
  • Package Include:Includes 30 pcs 6mm Clips ,30 pcs 7mm Clips, 30 pcs 8mm Clips(YT:1362), 50 pcs 8mm Push Clips(YT:3143), 30 pcs 9mm Clips, 30 pcs 10mm Clips.
Bestseller No. 9
AUTOKAY 100pcs Fender Liner Clip Push-Type Fastener Retainer 11589292 for GMC GM
  • Built to strict quality control standards.
  • Ready to use, Direct Replacement.
  • Superior quality parts.
  • Application: used on most vehicles for Chevrolet & GMC C & K Trucks 2007-2008, Auveco A20991
Bestseller No. 10
GOOACC Nylon Bumper Fastener Rivet Clips Fender& Bumper Shield Retainer for GM, Ford & Chrysler 7mm Hole Retainer Auto Body Clips - 100PCS
  • Great Material - These bumper clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use..Material:plastic
  • Universal Plastic Clip - 7mm (1/4") Hole Size; .095" - .540" Panel Range Universal Push Clip
  • WIDELY APPLICATION - Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
  • GM #1605396, 1595864; Chrysler 6030441; Ford 388577S, W705589-S300
  • PACKAGE INCLUDE: 100PCS Fender& Bumper Shield Retainer

Last update on 2024-03-27 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


2 thoughts on “Rear Liftgate Will Not Open with Outside Handle – 2013-2014 Chevrolet Spark”

Leave a Reply to Heather Joyner Cancel reply

Share to...