“This site contains affiliate links for which OEMDTC may be compensated” |
November 7, 2019 NHTSA CAMPAIGN NUMBER: 19V801000
Loss of Electric Power Steering Assist
A greater steering effort would be needed to control the vehicle if power steering is lost, increasing the risk of a crash.
NHTSA Campaign Number: 19V801
Manufacturer General Motors LLC
Components STEERING
Potential Number of Units Affected 476
Summary
General Motors LLC (GM) is recalling certain 2014-2016 Chevrolet SS vehicles that previously received an inspect-only remedy under recall 17V-382. Corrosion of the connector between the electric power steering module and the torque sensor connector may cause a loss of electric power steering assist.
Remedy
GM will notify owners, and dealers will replace the steering gear assembly, free of charge. The recall began December 27, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GM customer service at 1-586-596-1733. GM’s number for this recall is N192265980.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
Condition
General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2014 – 2016 model year Chevrolet SS, and Caprice (Export only) vehicles that were subject to NHTSA Recall No. 17V382 (GM 17248) and may have been incorrectly inspected. These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor. If power steering assist is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash.
Correction
Dealers will replace the steering gear assembly with a new assembly fitted with gold-plated terminals.
Parts
Quantity | Part Name | Part No. |
1 | Electric Belt Drive Rack and Pinion Steering Gear | 92289255 |
2 | Steering Gear Boot Inner Clamp | 22913281 |
4 | Steering Gear Bolt (TTY) | 11611833 |
2 | Steering Tie Rod to Knuckle Nut | 11609282 |
1 | Front Lower Control Arm Front Bolt | 92139183 |
1 | Front Lower Control Arm Front Nut | 11609283 |
1 | Intermediate Shaft To Steering Gear Bolt | 11609752 |
2 | Intermediate Shaft To Steering Column Bolt – shows as sway bar nut in EPC | 11588431 |
IMPORTANT SAFETY RECALL
February 2020
This notice applies to your vehicle, VIN: ____________________
Dear General Motors Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2014 – 2016 model year Chevrolet SS, and Caprice (Export only) vehicles that were subject to NHTSA Recall No. 17V382 (GM 17248) and may have been incorrectly inspected. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
I M P O R T A N T |
Why is your vehicle being recalled? | The subject vehicles may have been incorrectly inspected under NHTSA Recall No. 17V382 (GM 17248) and, as a result, required steering gear replacements may not have been made under that recall. These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor. If power steering assist is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash. |
What should you do? | You should contact your GM dealer to arrange a service appointment as soon as possible. |
Did you already pay for this repair? | Even though you may have previously had repairs for this condition, you will still need to take your vehicle to your dealer for additional repairs. If you have already paid for repairs for the recall condition, please complete the enclosed reimbursement form and present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if this is not convenient, you may mail the completed reimbursement form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and required documents must be presented to your dealer or received by the Reimbursement Department by February 28, 2021, unless state law specifies a longer reimbursement period. |
Do you have questions? | If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below. |
Division | Number | Text Telephones (TTY) |
Chevrolet | 1-800-630-2438 | 1-800-833-2438 |
Puerto Rico – English | 1-800-496-9992 | |
Puerto Rico – Español | 1-800-496-9993 | |
Virgin Islands | 1-800-496-9994 |
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National
Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 19V801.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Maryann L. Combs
Vice President
Global Vehicle Safety
Enclosure
GM Recall: N192265980
Representative Letter – Customer letters are brand, model and model year specific; listing the 17-digit VIN and are personalized.
IMPORTANT SAFETY RECALL
December 2019
This notice applies to your vehicle, VIN: _________________
Dear General Motors Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2014 – 2016 model year Chevrolet SS vehicles that were subject to NHTSA Recall No. 17V382 and may have been incorrectly inspected. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
I M P O R T A N T
|
Why is your vehicle being recalled? | The subject vehicles may have been incorrectly inspected under NHTSA Recall No. 17V382 (GM 17248) and, as a result, required steering gear replacements may not have been made under that recall. These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor. If power steering assist is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash. |
What will we do? | Parts to repair your vehicle are not currently available, but when parts are available, your GM dealer will replace the steering gear assembly with a new assembly fitted with gold-plated terminals. This service will be performed for you at no charge.
We are working as quickly as possible to correct this condition. When parts are available, we will send you another letter asking you to take your vehicle to your GM dealer to have your vehicle serviced. You can also check the status of this recall at: https://my.gm.com/recalls. If you have already paid for repairs for this condition, you may submit those charges using the reimbursement request form that will be provided with the next letter. |
Do you have questions? | If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below. |
Division | Number | Text Telephones (TTY) |
Chevrolet | 1-800-630-2438 | 1-800-833-2438 |
Puerto Rico – English | 1-800-496-9992 | |
Puerto Rico – Español | 1-800-496-9993 | |
Virgin Islands | 1-800-496-9994 |
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 19V801.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Maryann Combs
Vice President
Global Vehicle Safety
GM Recall: N192265980
Frequently Asked Questions (FAQs) for Safety Recall N192265980
Loss Of Power Steering Assist
These questions and answers are being provided to help GM dealers respond to inquiries from involved vehicle owners about the Safety recall identified above.
Q1) Which vehicles are involved?
2014-2016 Chevrolet Caprice and SS vehicles.
Q2) What is the issue or condition?
Vehicles that were subject to NHTSA Recall No. 17V382 and may have been incorrectly inspected. These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor.
Q3) What symptoms may be experienced? What warning signs may be associated with the issue or condition described?
If power steering assist is lost, manual steering functionality is retained but would require increased steering effort, particularly at lower speeds, increasing the risk of a crash. A malfunction indicator light displays on the instrument panel and a chime sounds to inform the driver.
Q4) What is the remedy/repair?
Dealers will replace the power steering gear assembly.
Q5) What is the safety risk? Is the vehicle safe to drive?
If power steering assist is lost, manual steering functionality is retained but would require increased steering effort, particularly at lower speeds, increasing the risk of a crash.
Q6) Does the customer have to pay for this remedy/repair?
No, this inspection/repair will be done at no cost to the customer.
Q7) Is the remedy/repair available now?
Yes.
Q8) What should customers do until recall repairs can be completed? Are there any special instructions?
If special instructions are provided, they will be included in the notification letters to customers.
Q9) How can customers check to see if their vehicle is involved in this field action?
Customers who own a vehicle involved in the field action will be notified by mail by General Motors, but they may also check their Vehicle Identification Number (VIN) for field actions in GM Owner Center at https://my.gm.com/recalls or via NHTSA’s website at https://vinrcl.safercar.gov/vin/.
Q10)If customers are concerned, can they get a rental car or courtesy transportation?
Courtesy transportation is available for customers whose vehicles are involved in this recall and are within the warranty coverage period for the warranty which is associated with this recall. Please refer to Warranty Administration Bulletin #17-NA-073: Field Action Courtesy Transportation Policy for further information.
SEOCONTENT-START
Product Safety Recall
N192265980 Loss of Power Steering Assist
Copyright 2019 General Motors. All Rights Reserved. Page 1 of 6
Release Date:
January 2020
Revision:
00
Attention:
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
Vehicles involved in this recall were placed on stop delivery November 07, 2019. Once the service procedure contained in this bulletin has been performed on the vehicle, the vehicle is released from stop delivery and the vehicle can be delivered to the customer.
All involved vehicles that are in dealer inventory must be held and not delivered to customers, dealer traded, or used for demonstration purposes until the repair contained in this bulletin has been performed on the vehicle.
Make
Model
Model Year
RPO
Description
From
To
Chevrolet
SS
2014
2016
Chevrolet
Caprice (Export only)
2014
2016
Involved vehicles are marked “open” on the Investigate Vehicle History screen in GM Global Warranty Management system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections and/or repairs.
Condition
General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2014 – 2016 model year Chevrolet SS, and Caprice (Export only) vehicles that were subject to NHTSA Recall No. 17V382 (GM 17248) and may have been incorrectly inspected. These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor. If power steering assist is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash.
Correction
Dealers will replace the steering gear assembly with a new assembly fitted with gold-plated terminals.
Parts
Quantity
Part Name
Part No.
1
Electric Belt Drive Rack and Pinion Steering Gear
92289255
2
Steering Gear Boot Inner Clamp
22913281
4
Steering Gear Bolt (TTY)
11611833
2
Steering Tie Rod to Knuckle Nut
11609282
1
Front Lower Control Arm Front Bolt
92139183
1
Front Lower Control Arm Front Nut
11609283
1
Intermediate Shaft To Steering Gear Bolt
11609752
2
Intermediate Shaft To Steering Column Bolt – shows as sway bar nut in EPC
11588431
Important: Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which power steering gear assembly to order.
IMPORTANT: It is estimated that 531 involved vehicles will require part replacement. Due to the small number of vehicles anticipated that will need this fix and the limited initial parts availability, dealers are encouraged not to order these parts for use as shelf stock.
Reminder: Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts to confirm RIM managed status.
Product Safety Recall
N192265980 Loss of Power Steering Assist
Page 2 of 6
Warranty Information
Labor Operation
Description
Labor Time
Trans. Type
Net Item
9104710*
Electric Belt Drive Rack and Pinion Steering Gear Replacement-Includes Module Programming
Add: Front Toe Alignment
Add: Relearn Steering Angle Sensor
2.0
0.7
0.1
ZFAT
N/A
9104785
Customer Reimbursement Approved
– For USA dealers only
– For Export dealers only
N/A
0.2
ZFAT
**
9104786
Customer Reimbursement Denied – For USA dealers only
N/A
ZFAT
***
9104937
Working Capital Assistance Program Reimbursement
N/A
ZFAT
****
Note: To avoid having to “H” route the customer reimbursement transaction for approval, it must be submitted prior to the repair transaction.
* Includes front wheel alignment, power steering control module programming and steering wheel angle sensor centering.
To avoid warranty transaction rejections, carefully read and follow the instructions below:
• The SPS Warranty Claim Code must be accurately entered in the “SPS Warranty Claim Code” field of the transaction.
• When more than one Warranty Claim Code is generated for a programming event, it is required to document all Warranty Claim Codes in the “Correction” field on the job card. Dealers must also enter one of the codes in the “SPS Warranty Claim Code” field of the transaction, otherwise the transaction will reject. It is best practice to enter the FINAL code provided by SPS.
Warranty Claim Code Information Retrieval
If the SPS Warranty Claim Code was not recorded on the Job Card, the code can be retrieved in the SPS system as follows:
1. Open TIS on the computer used to program the vehicle.
2. Select and start SPS.
3. Select Settings.
4. Select the Warranty Claim Code tab.
The VIN, Warranty Claim Code and Date/Time will be listed on a roster of recent programming events. If the code is retrievable, dealers should resubmit the transaction making sure to include the code in the SPS Warranty Claim Code field.
** For USA: Submit the dollar amount reimbursed to the customer in Net/Reimbursement. Submit $20.00 administrative allowance in Net/Admin Allowance.
For Export: Submit the dollar amount reimbursed to the customer in Net/Reimbursement.
*** Submit $10.00 administrative allowance in Net/Admin Allowance.
Working Capital Assistance Program (WCAP) Reimbursement – USED INVENTORY ONLY
Note: USA Only – To avoid having to “H” route the WCAP transaction for approval, it must be submitted prior to the repair transaction.
Important: The WCAP ZSET transaction labor code, 9800042, provided in the dealer message sent on December 10, 2019, must have been submitted prior to the submittal of the ZFAT transaction labor code or the claim will reject.
**** USA Dealers Only – For vehicles eligible under the Working Capital Assistance Program, the amount should be submitted in Net Item/Miscellaneous. This amount has been calculated to a daily value for the days that the vehicle was in used dealer inventory and not available for sale. This reimbursement is limited to the number of days from the date of the stop sale/stop delivery order, (December 10, 2019) to the date the inspection or repair closed the recall bulletin. (not to exceed 39 days).
Product Safety Recall
N192265980 Loss of Power Steering Assist
Page 3 of 6
Vehicle
Working Capital Assistance Reimbursement Amount – USA Only
2014 Chevrolet SS
$8.65
2015 Chevrolet SS
$10.21
2016 Chevrolet SS
$11.88
Service Procedure
Note: Programming the power steering control module and completing a wheel alignment is required after replacing the Electric Belt Drive Rack and Pinion Steering Gear. Refer to Power Steering Control Module Programming and Setup and Wheel Alignment in SI. Module Configuration and Setup MUST be completed after programming the power steering control module.
Replace the Electric Belt Drive Rack and Pinion Steering Gear. Refer to Electric Belt Drive Rack and Pinion Steering Gear Replacement in SI.
Note: Use Loctite 272 on the front lower control arm nut and bolt when installing.
Dealer Responsibility – For USA & Export (USA States, Territories, and Possessions)
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
The US National Traffic and Motor Vehicle Safety Act provides that each vehicle that is subject to a recall of this type must be adequately repaired within a reasonable time after the customer has tendered it for repair. A failure to repair within sixty days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. If the condition is not adequately repaired within a reasonable time, the customer may be entitled to an identical or reasonably equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation. To avoid having to provide these burdensome remedies, every effort must be made to promptly schedule an appointment with each customer and to repair their vehicle as soon as possible. In the recall notification letters, customers are told how to contact the US National Highway Traffic Safety Administration if the recall is not completed within a reasonable time.
Dealer Responsibility – All
All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers’ possession and subject to this recall must be held and inspected/repaired per the service procedure of this bulletin before customers take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealer-traded, released to auction, used for demonstration, or any other purpose.
All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System (CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified for sale within the CPOIS system, or once again be used in the CTP program.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this bulletin. A copy of the customer letter is provided in this bulletin for your use in contacting customers. Recall follow-up cards should not be used for this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this field action enters your vehicle inventory you must take the steps necessary to ensure the program correction has been made before selling the vehicle. In addition, for vehicles entering your facility for service, you are required to ensure the customer is aware of the open field action and make every reasonable effort to implement the program correction as set forth in this bulletin prior to releasing the vehicle.
Dealer Reports
For dealers with involved vehicles, a listing with involved vehicles has been prepared and will be provided to U.S. and Canadian dealers through the GM GlobalConnect Recall Reports, or sent directly to export dealers. The listing may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete this recall is a violation of law in several states/provinces/countries. Accordingly, you are urged to limit the use of this report to the follow-up necessary to complete this recall.
Product Safety Recall
N192265980 Loss of Power Steering Assist
Page 4 of 6
Customer Notification
USA – General Motors will notify customers of this recall on their vehicle (see copy of customer letter included with this bulletin).
Export – Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached sample letter.
Customer Reimbursement
Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to be submitted to the dealer prior to or by February 28, 2021. See General Motors Service Policies and Procedures Manual, Section 6.1.11 – Product Field Action Customer Reimbursement Procedure (USA & Canada) or local Policies and Procedures, for details.
GM bulletins are intended for use by professional technicians, NOT a “do-it-yourselfer”. They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your vehicle may benefit from the information.
We Support Voluntary Technician Certification
Product Safety Recall
N192265980 Loss of Power Steering Assist
Page 5 of 6
IMPORTANT SAFETY RECALL
February 2020
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2014 – 2016 model year Chevrolet SS, and Caprice (Export only) vehicles that were subject to NHTSA Recall No. 17V382 (GM 17248) and may have been incorrectly inspected. As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
IMPORTANT
• Your vehicle is involved in GM safety recall N192265980.
• Schedule an appointment with your Chevrolet dealer.
• This service will be performed for you at no charge.
Why is your vehicle being recalled?
The subject vehicles may have been incorrectly inspected under NHTSA Recall No. 17V382 (GM 17248) and, as a result, required steering gear replacements may not have been made under that recall. These vehicles may experience loss of electric power steering (“EPS”) assistance while driving or idling as a result of fretting corrosion on the connector between the EPS module and the torque sensor. If power steering assist is lost, manual steering functionality is retained but would require an increased steering effort, particularly at lower speeds, increasing the risk of a crash.
What should you do?
You should contact your GM dealer to arrange a service appointment as soon as possible.
Did you already pay for this repair?
Even though you may have previously had repairs for this condition, you will still need to take your vehicle to your dealer for additional repairs. If you have already paid for repairs for the recall condition, please complete the enclosed reimbursement form and present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if this is not convenient, you may mail the completed reimbursement form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and required documents must be presented to your dealer or received by the Reimbursement Department by February 28, 2021, unless state law specifies a longer reimbursement period.
Do you have questions?
If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below.
Division
Number
Text Telephones (TTY)
Chevrolet
1-800-630-2438
1-800-833-2438
Puerto Rico – English
1-800-496-9992
Puerto Rico – Español
1-800-496-9993
Virgin Islands
1-800-496-9994
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 19V801.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Maryann L. Combs
Product Safety Recall
N192265980 Loss of Power Steering Assist
Page 6 of 6
Vice President
Global Vehicle Safety
Enclosure
GM Recall: N192265980
***********************************************************
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5212
URGENT – DISTRIBUTE IMMEDIATELY
Date: November 07, 2019
Subject: Upcoming Safety Recall N192265980
Loss of Power Steering Assist
Models: 2014-2016 Chevrolet Caprice
2014-2016 Chevrolet SS
To: All General Motors Dealers
STOP DELIVERY ORDER
General Motors has notified the National Highway Traffic Safety Administration (NHTSA) about an upcoming safety recall that involves 2014-2016 model year Chevrolet Caprice and SS vehicles. The GM recall number is N192265980.
It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification until the defect is remedied.
These vehicles may experience a loss of electric power steering (“EPS”) assist while driving. Loss of EPS assist may last an entire ignition cycle, but may return once the vehicle is restarted. Customers may experience this condition during subsequent ignition cycles. If power steering assist is lost, manual steering functionality is retained but would require increased steering effort, particularly at lower speeds, increasing the risk of a crash.
Parts are not currently available, but when parts are available, dealers will replace the power steering gear assembly.
Until further instructions are received, involved vehicles that are in dealers’ possession (new or used vehicle inventory, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc.) must be held and not delivered to customers, dealer-traded, released to auction, used for demonstration purposes or any other dealer use. All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System (CPOIS) will be de-certified.
The Investigate Vehicle History (IVH) screen in the Global Warranty Management (GWM) system will be updated for this upcoming recall on
November 07, 2019. This action has been taken to assist dealers with determining which vehicles are involved so they can properly respond to customer inquiries.
Question and Answer Document (Q&A)
Attached to this message you will find a document that addresses the ten most likely questions customers may have regarding this Safety Recall. Please use this information as an aid to confidently answer customer concerns.
Dealers will be advised when the recall bulletin is released. Until the recall bulletin is released, the IVH screen in GWM will display “N/A” under Release Date and “Incomplete – Remedy not yet available” under Status. This means the required repair is not yet available and dealers should not attempt to perform any repairs.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
****************************************************************
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5284
URGENT – DISTRIBUTE IMMEDIATELY
Date: January 16, 2020
Subject: N192265980 – Safety Recall
Loss of Power Steering Assist
Models: 2014-2016 Chevrolet Caprice (Export only)
2014-2016 Chevrolet SS
To: All General Motors Dealers
General Motors is releasing Safety Recall N192265980 today. The total number of U.S. vehicles involved is approximately 476. Please see the attached bulletin for details.
Vehicles involved in this recall were placed on stop delivery December 10, 2019. Once the service procedure contained in the bulletin has been performed on the vehicle, the vehicle is released from stop delivery and the vehicle can be delivered to the customer.
Question and Answer Document (Q&A)
Attached to this message you will find a document that addresses the ten most likely questions customers may have regarding this Safety Recall. Please use this information as an aid to confidently answer customer concerns.
Working Capital Assistance Program (WCAP) Eligibility
Vehicles which were in dealer inventory at the time of this bulletin release were eligible for WCA. Please refer to the attached bulletin and GlobalConnect Message GCUS-9-7345 for additional information.
Customer Letter Mailing
The customer letter mailing will begin on February 04, 2020.
Global Warranty Management (GWM)
The Required Field Action section on the Investigate Vehicle History (IVH) screen will be updated January 16, 2020. There are no involved vehicles in dealer new inventory. Please hold all warranty transactions until IVH has been updated.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
*********************************************************************
GM CUSTOMER CARE AND AFTERSALES
DCS5256
URGENT – DISTRIBUTE IMMEDIATELY
Date: December 10, 2019
Subject: Upcoming Safety Recall N192265980
Loss of Power Steering Assist
Application for Used Vehicle Working Capital Assistance Program (WCAP)
Models: 2014-2016 Chevrolet SS
To: All General Motors Dealers
On November 07, 2019, GM sent to all GM dealers GlobalConnect Message GCUS-3-1658 regarding safety recall N192265980.
The required repair to complete this recall is not yet available. Until further instructions are received, the involved vehicles that are in dealers’ possession (new or used vehicle inventory, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc.) must be held and cannot be delivered to customers, dealer-traded, released to auction, used for demonstration purposes or put to any other use.
This message is to inform US dealers who have involved vehicles in their inventory that they can now apply for the used vehicle Working Capital Assistance Program (“WCAP”) for safety recall N192265980.
Before proceeding with the application process described below, dealers must verify vehicle eligibility based on the program terms and guidelines that were provided in GM GlobalConnect Message GCUS-9-7345 dated February 21, 2019. Applications submitted on ineligible vehicles are subject to chargeback of any incentives paid to the dealer under the WCAP. Because compensation and tracking requires visibility into dealers’ inventory, dealers must also have agreed to a Dealer Data Share agreement with GM in order to receive any compensation under this program.
To apply for the WCAP for safety recall N192265980, dealers must access the GM Global Warranty Management (GWM) system and submit a “ZSET” warranty transaction using the labor code provided below for each eligible vehicle. This zero dollar special transaction type is the dealer’s application for compensation and constitutes a representation from the dealer that the vehicle is eligible for WCAP assistance.
Note: Acceptance of the warranty transaction does not ensure vehicle eligibility or guarantee the provision of any assistance as defined by program terms and guidelines.
Labor Code
Description
Labor Time
Trans Code
9800042
Working Capital Assistance for Safety Recall N192265980
N/A
ZSET
To be eligible for the WCAP, a vehicle must be in dealer inventory at the time the related field action bulletin is released. If a vehicle has been delivered, wholesaled or otherwise disposed of prior to release of the bulletin, the vehicle is not eligible for assistance. Additionally, recalled vehicles taken in on trade may be eligible for assistance if the dealer immediately reports the vehicle in used vehicle inventory via its Dealer Management System (DMS) and makes application through the GWM system.
To ensure that GM is receiving daily inventory information, which is necessary to process payments and make eligibility determinations under the WCAP, the dealer’s vehicles must be properly identified in the dealership’s DMS. A daily feed of this information is provided to GM through the Dealer Data Share (DDS) agreement.
Beginning with the 1st quarter of 2019, all WCAP payments will be facilitated through the Global Warranty Management (GWM) system. For each eligible vehicle, a qualifying dealer will submit for WCAP vehicle enrollment with a “ZSET” transaction type and for reimbursement with a “ZFAT” transaction type both through the GWM system. If approved, a WCAP credit for that vehicle will be issued to the dealer’s “open account” similar to any other warranty credit. WCAP submission instructions and the required labor code will also be provided in the appropriate field action bulletin. Each WCAP transaction being credited will be clearly identified on the dealer’s daily credit memo.
In order to receive payment, a dealer must have timely reported the vehicle in used vehicle inventory, retained the vehicle until the related field action bulletin is released, and properly applied for the WCAP payment. The vehicle must also be otherwise eligible under WCAP rules and guidelines.
GM reserves the right to amend, modify, terminate, or cancel this program at any time in its sole discretion.
END OF MESSAGE GM CUSTOMER CARE AND AFTERSALES
SEOCONTENT-END
3 Affected Products
Vehicle
MAKE | MODEL | YEAR |
CHEVROLET | SS | 2014-2016 |
16 Associated Documents
Owner Notification Letter(Part 577)
RCONL-19V801-3553.pdf 77.238KB
Recall 573 Report – Amendment 2
RCLRPT-19V801-1255.PDF 214.904KB
Recall Quarterly Report #2, 2020-2
RCLQRT-19V801-0017.PDF 211.232KB
Recall Acknowledgement
RCAK-19V801-7067.pdf 243.964KB
Recall Quarterly Report #1, 2020-1
RCLQRT-19V801-8286.PDF 211.138KB
Manufacturer Notices(to Dealers,etc) – Date: November 07, 2019 Subject: Upcoming Safety Recall N192265980 Loss of Power Steering Assist
Defect Notice 573 Report
RCLRPT-19V801-6096.PDF 214.608KB
Frequently Asked Questions (FAQs) for Safety Recall N192265980 Loss Of Power Steering Assist
RMISC-19V801-5672.pdf 83.652KB
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-19V801-9725.pdf 137.024KB
Manufacturer Notices(to Dealers,etc) – Notice to GM Dealers re N192265980 – Safety Recall Loss of Power Steering Assist
Miscellaneous Document – Frequently Asked Questions for Loss Of Power Steering Assist
RMISC-19V801-1019.pdf 84.218KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V801-7846.pdf 90.571KB
Safety Bulletin
RCSB-19V801-3512.pdf 181.178KB
Manufacturer Notices(to Dealers,etc) – Date: December 10, 2019 Subject: Upcoming Safety Recall N192265980 Loss of Power Steering Assist Application for Used Vehicle Working Capital Assistance Program (WCAP)
RCMN-19V801-1294.pdf 108.233KB
Recall 573 Report – -Amendment 1
RCLRPT-19V801-9855.PDF 214.612KB
Recall Quarterly Report #3, 2020-3
RCLQRT-19V801-4089.PDF 211.321KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V801&docType=RCL
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- 8+ Popular Functions, Full System Diagnosis: TopScan Lite supports OBD2 full system diagnosis functions, including read/clear codes, ECU information,AUTO VIN, viewing real-time data, and active tests. It offers 8+ reset functions: Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF Regeneration, ABS Bleeding, BMS Reset, and Airbag Reset. By these functions, you can save on unnecessary repair costs and reduce repair times significantly.
- Bi-directional Control, Quickly Locate Problems: The bi-directional scan tool enables you to send commands from your smartphone directly to the vehicle's ECU for active testing. This feature helps to quickly narrow down problem areas, such as A/C clutch, windows, doors, sunroof, etc., reducing the mechanic's diagnostic time and can help DIY users locate faults more easily. Additionally, TopScan Lite provides fault analysis and repair guidance, helping you solve problems efficiently.
- Bluetooth Quick Pairing in Seconds: With the upgraded 5.0 Bluetooth system, TopScan Lite ensures a faster connection, eliminating the hassle of wires.The bluetooth pairing process needs to be completed in the application (IOS: TOPGURU&Android: TopScan). you can download our app from APP Store and Google play. TopScan Lite provides one software updates with no fee. (Tips: Cannot support 32-bit cell phones}
- Performance Testing: Always Know Your Vehicle's Condition, TopScan Lite supports speed performance testing, allowing you to analyze speed changes and calculate engine displacement efficiency,the higher the VE volumetric efficiency, the better the power output performance of the engine.
- 4- Repair Guides, Your Online Assistant: TopScan Lite has launched 4 functions that are most touching for all car owners, DIY enthusiasts, and mechanics: TSB factory technical bulletins, easier and more convenient search. The OBD common fault code repair guidance, leading you to solve problems quickly. DLC diagnostic seat location, quickly positioning. Fault code database, telling you the reasons and solutions for all fault lights, saying goodbye to complicated methods.
- Advanced online ECU coding►►Maximize the capabilities of your vehicles with the ArtiDiag Pro ECU Coding tool. This scan tool, seamlessly compatible with renowned models such as VW, AUDI, SKODA, SEAT, BENZ, and more, empowers you to uncover hidden features, deactivate annoying functions, and code retrofitted components for peak performance. Ensure a backup before coding and steer clear of coding sessions on low battery levels.
- Efficient Diagnostics with Bidirectional Control►►Say goodbye to uncertainty, streamline diagnostics, and reclaim valuable time with ArtiDiag Pro scan tool. This bidirectional scan tool exceeds expectations, enabling targeted tests on individual actuators to swiftly identify and resolve issues. Covering lights, door locks, fuel and coolant systems, windows, wipers, EVAP, and more in vehicle components.
- 31+ Services Resolve 90% of Repair Challenges►►Unleash maximum productivity with the ArtiDiag Pro, a scan tool that tackles 90% of maintenance issues through its 31 special functions. Effortlessly clear oil maintenance indicators with oil reset. Engage the EPB Reset for brake system management and establish precise alignment with the Steering Angle Reset to define the straight-line reference position for your vehicle.
- FCA Autoauth&Full Sets of Adapters►►This diagnostic tool supports Autoauth for FCA SGW, Chrysler, Jeep, Dodge, Fiat etc. 2017 and later. Equipped with the Chrysler 12+8 adapter, the BMW-20 Adapter and Benz BZ-38 Adapter, this scanner saves you the hassle of sourcing adapters separately.
- Professional Customer Support►►At TOPDON, your satisfaction is our unwavering commitment. Experience hassle-free support and a lifetime of expert assistance. Should you encounter any challenges, reach out to us at 833-629-4832. For returns, please damage the packaging to prevent Amazon from reselling it. Please be advised that after two years, a fee of 249 Bucks will apply for software updates.
- 【Recom-mended by YouTube Machinists】We are proud to tell that LAUNCH X431 PROS V+ 5.0 has been recom-mended as " Per-fect Overall Car Diagnostic Scanner " by famous editors, and also highly recom-mended by YouTube machinists.
- 【What Are the 2024 PROS V+ 5.0 Hardware Changes】With new in-house developed screen; 8.0 MP Pixel Rear Camera;Android 10.0 System; 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version; 4+64GB provides larger data memory; 6300mAh battery lasts 15+h work; CPU Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology;DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly
- 【Technology Itself is Proof of Quality】LAUNCH DBSCar VII+Self-developed screen.Using USB type A/USB type C connectors and DBSCar VII VCI connector can make the process of diagnosing and matching faster and more stable, DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. The latest self-developed screen from LAUNCH, in addition to its strong anti-fall ability, is different from other launch models in sensitivity and touch.
- 【2024 Newly Added CANFD】With the CANFD Connector, you can seamlessly diagnose a wider range of vehicle models (up to model year 2024, see image below for supported models) using advanced CANFD protocols. Gone are the days of being limited to certain models - now you can confidently handle the latest models, even those with the most advanced systems.
- 【Bi-Directional+Online Coding+Over 37 Reset Services+Adaptation+Initialization+ Matching】PROS V+ 5.0 scan tool Elite also support:K-EY programming,Gear/ SAS/ EPB/ TPMS/ IMMO/ BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.You can get 100+ advanced special functions under the"vehicle brand"-"menu"-"system" - "special functions".
- 💪【2024 New Uugraded Version of X431 ELITE GM】2024 LAUNCH X431 Elite 2.0 PRO fit for GM is upgraded version with Enhanced Hardwares & Software, MUCH FASTER and SMARTER! 👍Dismountable USB Cable 👍Larger 2G+16GB Extended Memory 👍Android 8.1 OS 👍 3000mAh Battery with Power Button 👍Lifetime F~ree Update👍 Full Systems Diagnostic 👍All F~ree Service Function 👍Bi-Directional Control 👍AutoVIN 👍Full OBD2 Modes
- 💪【Powerful Bi-Directional Control/Active Test】LAUNCH X431 Elite 2.0 Pro fit for GM scanner code reader can send command directly from the automobile scanner to vehicle's ECU to perform vehicle-specific active tests on car's components and parts, confirm whether this part work normally and find out potential problems. Such as Doors, Windows, Mirrors, Locks, Lights, Headlamps, Wipers, Sunroofs, Air Pump Relay Test, Fuel Pump Relay Test, Spark Advance Test, Fan Speed Desired Test, Cooling Fan Test etc.
- 💪【All F~ree Maintenance Service Reset】As the popular diagnostic scanner in the market, LAUNCH X431 Elite 2.0 PRO diagnostic scan tool comes with comprehensive service options: Reset, Relearn, Relearn, Match, Adaption, Calibration, Initialization. Such as Oil light reset, EPB, SAS, Throttle Relearn, D.P.F Regen, ABS Bleeding, Injector Coding, CVT, Air Suspension, Crankshaft Relearn, Gear Learning, Battery Registration. The Functions depends on the conditions of the vehicle, please inform the VIN by QA or Email for check.
- 💪【OE-LEVEL Full Systems Diagnostic 】2024 new upgraded LAUNCH X431 Elite 2.0 PRO fit for GM diagnostic scan tool, provides you with All-Around & In-Depth diagnostic for all available modules such as ECM/BCM/SAS/ABS/TCM/.... It supports to read/clear codes, live data stream, retrieves module info, turn off warning light, actuation test, freeze-frame and so on, which make you easily know the car situation and finger out problems soon.
- 💪【AUTO VIN FOR GM & FULL OBD2 MODES FOR ALL BRANDS】AUTO-VIN can auto access to car information and scan vehicle systems by one touch for 2006+ GM cars like Buick/Chevy/Cadillac/GMC/Alpheon/Ravon/Pontiac/Saturn/Hummer/Oldsmobile/Holden/Daewoo/Workhorse, no longer needed to input manual. LAUNCH X431 Elite 2.0 Pro fit for GM has an extra function: It supports Full 10 OBD2 Test Modes for ALL brands vehicles after 1996, including I/M readiness, O2 Monitor Test, EVAP test(Mode 8), On-board Monitor test(Mode 6) and more.
- 👍【2024 LAUNCH NEW RELEASED FULL FUNCTIONAL SCANNER】 LAUNCH X431 PRO ELITE comes with✅Full Bi-directional Control✅ECU/Online Coding✅37+ Services✅All Systems Diagnostics✅F.C.A AutoAuth✅CANFD DOIP✅ V.A.G Guide✅ Refresh Hidden Functions✅Auto Vin✅Remote Control✅20,0000+ Vehicle Coverage✅ 25 languages✅8 Extension Modules Supported(TPMS,XPROG 3,Oscilloscope ...) 👉X431 PRO ELITE combine all the hot functions of comprehensive scanners according to the customer's favorite need.
- 👍【FULL BI-DIRECTIONAL CONTROL】X431 PRO ELITE Factory-Level scanner is capable of full bi-directional controls (active test) over various vehicle sub-systems and components like fuel pump test, radiator fan, cooling fan test, injector kill tests, relays,coils, solenoid valves, throttle, lights, abs motor pump, headlights, A/C clutch, windows/doors/roof/wipers etc. 🚩The bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.
- 👍【FULL ADVANCED FUNCTIONS: ECU CODING, V.A.G GUIDED...】LAUNCH X431 PRO ELITE diagnostic tablet can perform Online ECU coding for 95% cars, Component Matching, PMI, Adaptive Data Reset, V.A.G Guided,Power Balance,Online Calibration,Online Parameterization to diy vehicle settings and disable annoying features like seatbelt alarm, speed limiter,daytime lights and reveal hidden functions like rear-view mirror etc. 🚩The car scanner is better than other brands' scanners: More feature.
- 👍【HOT 37+ RESETS/CALIBRATION/INITIALIZATION/】LAUNCH X431 PRO ELITE compatible with 150+ car makes 1996-2024 and offers 37+ HOT services including Oil Reset, EPB, SAS Calibration,DPF, BMS, Throttle, TPMS Reset, Gearbox Match, Suspension, ABS Bleed, Injector Coding...You will get 300+ resets under "vehicle brand" >"system">"special functions".🚩This x431 diagnostic tool that is most worthwhile for DIYers, mechanics, and tire shops.
- 👍【8 EXPANSION MODULES SUPPORTED 】Support ADAS, VideoScope, Sensor Box, Endoscope,Oscilloscope,Battery tester,Wifi Printer,TS GUN, PROG 3 etc.➤ADAS Kit to assist ADAS calibration;VSP-600 VideoScope to check unseen parts of the engine, fuel tank etc.;S2-2 SensorBox to simulate vehicle sensor faults;O2-1 ScopeBox Oscilloscope to quickly acquire circuit signals;Battery Tester to do battery test;Printer to print out diagnostic reports; TS GUN: Activate all sensors,TPMS relearn,Program LAUNCH sensors;X-PROG 3🚩All are sold separately to meet your various needs.
- 🔥🔥🔥【2024 NEW VERSION OF MX808S MK808, SAME AS MK808BT PRO】Big Surprise! Autel has upgraded the MK808 to the 2024 MK808S. With the same cost, you are experiencing 5X faster diagnostics and 150 wider car coverage from 1996-2023-2024. Function as MK808BT PRO MK808K-BT MK808Z-BT, the pro-level MK808S enjoys powerful CPU ROCKCHIP RK3566, improved Android 11, larger 4+64GB, 5G & 2.4 GHz Dual WiFi, newly added Wi-Fi Print, Bi-directional Control and FCA Autoauth for Chrysler Jeep Dodge Fiat etc.
- 【2024 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2024 upgraded version of MaxiChek MX808, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective Autel scanner (without breaking the bank, same as MP808BT and MS906BT). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, supports 150+ car brands worldwide & FCA AutoAuth, Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including Oil Reset, SAS Calibration, IMMO, ABS Bleeding, Injector Coding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2023 to 2024.
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, provides ECU info, displays Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
- 【AUTO SCAN & AUTOVIN, 5X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its AutoVIN technology, you can identify your vehicle's make, model, and year information with just one click. The convenient AutoScan feature automatically scans all of the vehicle's ECUs and detects any fault codes. Check AutoVIN compatibility, please contact us at 📞 MotorzoneUS @ outlook . com 📞
- Auto Scanner Case Perfect Fit: This mini code readers & scan tools carrying case is perfect for BlueDriver Bluetooth Pro OBDII OBD2 LSB2 Scan Tool for iPhone & Android, Veepeak OBDCheck BLE OBD2 Bluetooth Scanner Auto OBD II Diagnostic Scan Tool, Dimension: 3.14 x 2.56 x 1.6 inches.
- Compact&Lightweight, Hard and Skid-Proof obdii scanner bluetooth Storage Bag: Made of hard EVA material with soft touch PU leather surface,It provides a full range of protection for your car code reader, it’s not only easy to store bluedriver LSB2 Diagnostic Scan Tool indoors prevent loss, but also can be fully prepared for outdoor activities in your car or truck, easy for you to read and clear your Check Engine Light and all other vehicle systems.
- 100% safe car scanner reader case holder: The Blue Driver OBDII scanner fits snugly in this case, without any looseness inside, keep your obd2 scanner safety all the time, this scanner tool case is sturdy, easy to open and close. You don't have to worry about damaging the OBD2 Diagnostic Scan Tool 'when' I accidentally drop the case or knock it to the ground.
- Portable Carrying Auto Mini Case: It is really compact and space saving, easy for you to carrying it anywhere, you can put it in your purse, pocket, backpack or just keep it in your car. You can always check up your vehicle with fixd car diagnostic tool, perfect as a gift for your friends, husband, father and someone who own a OBD2 Diagnostic Scan Tool.
- NOTE: For sale is only a case, not include the bluedriver obd2 scanner and other accessories, with any quality problem, please contact us directly, we will always on your service.
- [2023 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen for a tablet-like user experience. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide, provide an unparalleled diagnostic experience at an affordable price.
- [TOPDON's Newly Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [Newly Released DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast.
- [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🚘 XTOOL Advancer AD20 PRO 👉 2024 newest upgraded Version of AD20, A wireless obd2 code reader integrates full 10 of OBDII tests, all system scan, engine light check, oil rest, battery check, DTC lookup, performance test, trip analysis and other powerful features, Whether you're a professional mechanic or an inexperienced DIYer, repairs can be done easily.
- 🚘 All System Diagnostic Scanner 👉 AD20 Pro diagnostic scan too features with all system scan (In-depth check), accesses all vehicle systems. scan and clear manufacturer specific DTC codes that can’t be found on those c·heap obd scanners. Not just scan and check engine faults, AD20 Pro allows you to perform all scans to Engine, Powertrain, Steering & Brake, Airbag, ABS and more. Note: Read/clear code only, NOT FOR RESET.
- 🚘 Check Engine Light & Oil Reset 👉 Easily find out why the check engine light is on by yourself, quickly read and clear the diagnostic trouble code,view freeze frame, I/M monitor readiness. Also features with oil reset special function, you can effortlessly maintain the oil light at home instead of taking car to mechanic shop. Save your time and m·oney.
- 🚘 User Friendly Exclusive App 👉 Our value is based on comes with its own APP f‘ree downloadable on iPhone iOS, Pad, and Android. lifetime f’ree download, no subscription f‘ee at all. No need to spend a lot of time repeatedly switching through third party apps of varying quality for different features. With its simple interface and complete features and a customized dashboard, you can display your preferred functions, allowing you to focus on the most importantl data intuitively.
- 🚘 Track the Vehicle Performance 👉 The AD20 Pro supports a variety of performance tests and trip analyses. Performance Test allows you to measure datas such as 100 km/h acceleration time/top speed/engine load/engine coolant temperature. Trip Analysis gives you access to data such as top speed, average speed, average fuel consumption etc, analysing driving behaviour, helping you to monitor your car's performance over time and optimise your driving behaviour, improving driving safety. Also support personalise your head-up display with the Smart Dash feature.
Last update on 2024-03-29 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.