“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10163211
Manufacturer Communication Number: 19NA013
Summary
This technical bulletin provides repair information to correct a customer concern of hearing a ticking or popping noise at roof rail assist handle(s).
3 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHEVROLET | EQUINOX | 2018-2019 |
GMC | TERRAIN | 2018 |
SEOCONTENT-START
Service Bulletin Bulletin No.: 19-NA-013
Date: July, 2019
TECHNICAL
Subject: Ticking or Popping Noise at Roof Rail Assist Handle(s)
Brand: Model:
Model Year: VIN: Engine: Transmission:
from to from to
Chevrolet Equinox
GMC Terrain 2018 2019 All All
Holden Equinox
Involved Region or Country North America, Korea, Australia, New Zealand, Middle East, Israel, South America,
Thailand, Egypt and Africa
Additional Options (RPOs)
Condition
5222300
Customer may comment on hearing a ticking or popping noise at the area of the roof rail
assist handle(s). The noise is usually most noticeable on the driver’s side.
Cause The cause of the condition may be movement between the assist handle mounting
bracket and the inner roof rail structure.
Correction
Verify the condition and location(s), then lower the headliner and install a rivet into the
assist handle mounting bracket and inner roof rail, at the affected area(s). Follow the
steps in the Service Procedure below.
Page 2 July, 2019 Bulletin No.: 19-NA-013
Service Procedure
Note: It is only necessary to lower the headliner. Only
do those steps in headliner replacement that will lower
the headliner enough to access the affected handle
mounting bracket area(s)
1. Lower the headliner. Refer to Headlining Trim
Panel Replacement, in SI.
5222304
Caution: Enlist the use of a drill stop to prevent
damage to the outer roof surface.
2. Using a 1/8 inch (3.175 mm) drill bit, drill a hole
(location shown by arrow in the graphic above) at
all the affected assist handle bracket locations.
Left, front location is shown above, right side would
be similar.
3. Obtained locally, install a common 1/8 inch
(3.175 mm), dome head rivet, or equivalent, at the
drill location(s).
4. Verify condition has been corrected, then reinstall
the headliner. Refer to Headlining Trim Panel
Replacement, in SI.
Warranty Information
For vehicles repaired under the Bumper-to-Bumper
coverage (Canada Base Warranty coverage), use the
following labor operation. Reference the Applicable
Warranties section of Investigate Vehicle History (IVH)
for coverage information.
Labor Operation Description Labor Time
1481158* Install Rivet in Roof Rail Assist Handle Bracket
Without C3U — 2.2 hr
With C3U — 2.4 hr
Add Install Rivet Each Additional Bracket Location (maximum of 3) 0.2 hr
*This is a unique Labor Operation for Bulletin use only.
Version 2
Modified Released January 29, 2019
Revised June 26, 2019 – Added 2019 Model Year
SEOCONTENT-END
Bulletin No.: 19-NA-013
Date: July, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10163211
https://static.nhtsa.gov/odi/tsbs/2019/MC-10163211-9999.pdf
To View or Download this Document Click Here
NHTSA ID Number: 10154620
Manufacturer Communication Number: 19NA013
https://www.nhtsa.gov/recalls?nhtsaId=10154620
“This site contains affiliate links for which OEMDTC may be compensated” |
- 【4 Sizes Tri-Fold Exploding Pop Rivets Set】The flange blind rivets kit contains 20pcs 3/16”x 9/16”(4.8x14mm), 20pcs 3/16" x 3/4" (4.8x18.8mm), 20pcs 3/16" x 13/16" (4.8x20.6mm), 20pcs 3/16" x 1"(4.8x25mm), totally 80pcs. All of are packed by sizes in a sturdy storage container for easy storage. Abundant sizes and quantities can meet your various applications on your kayak.
- 【Premium Aluminum Material】The pop rivets assortment kit adopts high-quality aluminum body and steel mandrel for corrosion and rust resistance, which offers a strong grip, prevent stripping effectively. Flange design can increase the connection area with the plat to expand force-bearing area and stable holding. The surface is smooth and burr-free, and matches well with blind rivet setting tools.
- 【Tri-fold Design】When the mandrel is pulled out, the back of the rivet will split to form three anchor points in different directions. By expanding the contact surface, it can obtain stronger fixing force and bearing capacity than normal pop rivets.
- 【Easy to Use】 Firstly drill a suitable hole with an electric drill. Secondly insert the pop rivet into the hole. Finally pull out the mandrel with rivet gun. Work done. It is convenient for you to lock the rivets correctly and securely.
- 【Wide Application】Widely used for piping systems, shipbuilding, containers, caravans, trailers,lever handles, metal plates, furniture, marine, car dashboard, boat repairs, kayak, sheet, metal, canoe, instruments, attach rod holders and D rings etc. Suitable for industries construction, aviation, automotive and boat accessories.
- ✅This kit includes 14-sizes SAE black rivets and 4-sizes 304 stainless steel washers(As shown picture 2), all neatly packaged in a labeled plastic box. The black finish on the rivets is sleek and sturdy, with a snap-open design that pairs perfectly with a riveting gun for easy installation.
- ✅Elevate your projects with our premium Black Pop Rivets with Washers Kit! Made from premium aluminum and steel, these rivets are corrosion-resistant and acid-proof, ensuring long-lasting durability.
- ✅For a precise and effective assembly!The 304 stainless steel black washers provide additional support during riveting in soft materials or applications requiring a larger diameter surface, preventing pull-through. Perfect for handling oversized or irregularly shaped holes!
- ✅Versatile and reliable, our black rivets are widely used in diverse projects for their seamless integration with washers, making them ideal for securing even the most challenging shapes.
- ✅Say goodbye to mediocre riveting results and choose our Black Pop Rivets with Washer for a professional finish every time! Perfect for metalworking, HVAC, automotive, crafts, and more. Elevate your craftsmanship with our premium riveting solution today!
- SIZE–The Head Diameter of these pop rivets : 3/16”(4.8mm) | Flange Diameter: 11/32" (9mm) | Grip Length: 1/2"(12.7mm).
- Premium Aluminum Rivets-Our small pop rivets are made of high-quality aluminum caps and steel core, excellent performance in any environment due to acid and corrosion resistance.
- Easy to Use- The white pop rivets 3/16" are well-matched with rivet guns, robust, smooth surface and easy to install. Perfectly long-lasting and deformation-free for fastening a wide range of sheet metal and pipes.
- Wide Application- The blind rivets are suitable for both indoor and outdoor use, such as DIY home uses, business, automotive, aviation, ductwork, elevators, instruments, furniture, etc.
- Best After-Sale Service - You will get WORKPRO 200pcs rivets in a flip-top storage box, easy to access and storage. Please contact us if you have any problems with our product.
- ✅ 【1/4 Rivet Gun】One Squeeze, and you're done. 13 inch ergornomic long handles with two hands operation maximize the leverage to tackle full range pop blind rivets up to 1/4 inch or 6.4mm (not for threaded rivet nut).
- ✅ 【One-Stop-Solution】The rivet gun kit includes 350pcs aluminum rivets with 8 assorted sizes in an organized carring case, so you can easy reach the right size in compartmented and labeled case for your riveting project. It offers one stop solution for both DIY and jobsite.
- ✅ 【Easy to Use & Maintain】 Modular detachable design make it tool-free to change the knurled nosepieces, disassemble and maintenance. Built-in removable collection bottle is easy and safe to disposal the used rivet mandrels.
- ✅ 【Sturdy & Long Lasting】It is forged from cold formed and heat-treated spring-loaded carbon steel handles, plus aluminum alloy housing unlike other plastic body, highly increase the strength, durablity and reliablity.
- ✅ 【Versatile Application】The blind riveter can securely and permanently join together various metal, plastic, & leather sheets on DIY and home decoration, metalworking, gutter, vehicle modification like off-road, RV, van and kayak.
- ♚ Package Include: Set include 120pcs 1/8" x 1/4" rivets for your use, which diameter is 1/8"(3mm), grip length is 1/4"(6mm).
- ♚ Material: All the rivets are made of aluminum. Acid and corrosion resistance. Surface is smooth, strong yet lightweight, easy to install, will well match with the rivet gun.
- ♚ Product Feature: The blind rivets has a mandrel which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly.
- ♚ Application: These rivets are perfect for joining all kinds of metal plate and pipe. Great for joining plastic and thick fabric. Used for DIY home uses, business, automotive, aviation, ductwork, elevator, instruments, furniture etc.
- ♚ Quality Assurance: If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time.
- 500Pcs 14 Standard Sizes - Versatile aluminum blind rivets assortment kit for metal fastening, easily meets your needs.
- Premium Aluminum Rivets- Our pop rivets are made of high-quality aluminum caps and steel core, excellent performance in any environment due to acid and corrosion resistance.
- Reinforced Double-Sided Label Case- The pop rivets assortment kit comes in reinforced storage with a thickened latch, dividers, and double-sided label. 14 sizes are separately placed in 14 grids for easy storage and access.
- Easy to Use- The aluminum pop rivets are well-matched with rivet guns, robust, smooth surface and easy to install. Perfectly long-lasting and deformation-free for fastening a wide range of sheet metal and pipes.
- Wide Application- The rivet kit comes in a variety of sizes that are suitable for both indoor and outdoor use, such as DIY home uses, business, automotive, aviation, ductwork, elevators, instruments, furniture, etc.
- ✿3/16 Inch Blind Rivets: The package contains 100 x pop rivets, diameter: 3/16" / 4.8mm, grip length: 1" / 25mm.
- ✿High-Quality Material: Pop rivet is made of high-quality aluminum alloy, strong and durable, acid and corrosion resistant.
- ✿Excellent Workmanship: The open end blind rivets have a smooth surface, strong and durable, and can be well matched with the rivet gun.
- ✿Wide Range of Applications: Blind rivets are very suitable for indoor and outdoor use to connect pipes and metal plates.
- ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution.
- ❥ 【WHAT YOU GET】 100pcs rivet nuts, Metric size: M8.
- ❥ 【GOOD QUALITY】 Our rivet nuts are made of aluminum, which have high hardness and corrosion resistance, durable and non-deformable.
- ❥ 【RESONABLE DESIGN】These rivet nuts are knurled having deep thread inside, which are effective to fix and anti-slip.
- ❥ 【WIDE APPLICATION】 These assorted metric rivet nuts are widely used in automotive, furniture, decoration and other electrical and industrial products, suitable for a variety of occasions such as in air conditioning, fire fighting, gas or in medicine beverage food chemical industry and metal sheets factory.
- ❥ 【WARM TIPS】If you have any problem with our products, please feel free to contact me!
- ♛【Package Includes】: This package contains 60pcs 3/16" x 1" large flange blind rivets, which are packed in a plastic bag for easy storage.
- ♛【High Quality Material】: All our blind rivets which are made of aluminum. Acid and corrosion resistance. Surface is smooth, strong yet lightweight, easy to install, well match with the rivet gun.
- ♛【Product Feature】: Our large blind rivets has a mandrel which permits the formation of an up set on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly.
- ♛【Great Performancce】: The flange with larger contact area, it can increase torque strength and withstand higher radial tension.
- ♛【Application】: These rivets are perfect for joining all kinds of metal plate and pipe. Great for joining plastic and thick fabric. Used for DIY home uses, business, automotive, aviation, ductwork, elevator, instruments, furniture etc.
- 【Package & Size】Package comes with 50pcs black aluminum tri-fold exploding pop rivets. Pop blind rivets grip dia: 3/16" (4.8mm), grip Length: 1" (25mm),Flange Dia: 5/8"(16mm).Sufficient quantity to meet your different needs.
- 【Premium Material】Tri-fold pop rivets are made of high quality aluminum material which is wear resistance,corrosion resistance,high hardness,rust resistance, not easy to deformation,strong grip strength.Blind rivet surface polishing, smooth and without burrs, and matches well with blind rivet tools without demolding
- 【Tri-Folding Design】When the blind rivets mandrel is pulled with a rivet tool,the tri fold pop rivet spreads in three directions,forming three anchor points at the end of the application,increase the connection area with the platform,obtain stronger fixing force and bearing capacity. The performance of tip fold blind rivets is better than the ordinary
- 【Widely Used】Tri grip pop blind rivets are widely used in kayak sailboat,car,high-speed train, railway,container,RV,ship,lever handle,furniture,ship repair,plate,metal, connecting rod bracket and so on.Suitable for riveting with certain tightness
- 【Excellent After-Sales Service】After-Sales Guarantee:Zorveiio has a 24-hour human customer service.If you have any questions before purchasing or are not 100 percent satisfied with the aluminum pop Rivets.Please feel free to contact us, and we will provide you with solutions as soon as possible.
Last update on 2024-04-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.