“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161897
Manufacturer Communication Number: 19NA093
Summary
This technical bulletin provides repair information to correct a customer concern of Engine Air Filter Life Shows 0% After Battery Disconnect.
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
CHEVROLET | SILVERADO 1500 | 2019 |
GMC | SIERRA 1500 | 2019 |
Parts
Module, Comn Interface | 84644344 | 1 |
Module, Comn Interface | 84644343 | 1 |
SEOCONTENT-START
Bulletin No.: 19-NA-093
Date: May, 2019
Service Bulletin
TECHNICAL
Subject: Engine Air Filter Life Shows 0% After Battery Disconnect
Attention: This bulletin replaces PIP5605 and PIP5636. Please discard all copies of PIP5605 and PIP5636
Brand: | Model: | Model Year: | Build Date: | Engine: | Transmission: | |||
from | to | from | to | |||||
Chevrolet | Silverado 1500 (New Model) | 2019 | 2019 | SOP | February 11, 2019 (Fort Wayne) or February 13, 2019 (Silao). | 8–cylinder gas engine 5.3L (L84) or 6.2L (L87) | All | |
GMC | Sierra 1500 (New Model) | 2019 | 2019 |
Involved Region or Country | Canada, United States, Mexico |
Additional Options (RPOs) | Equipped with 8–cylinder gas engine 5.3L (L84) or 6.2L (L87) and OnStar (UE1) |
Condition | After a battery disconnect the driver information center (DIC) may incorrectly display Air Filter Life 0% – replace now. |
Cause | This false message may be caused by a firmware issue. |
Correction | Inspect the engine air filter, reset filter life, and check for an OnStar update. A new OnStar firmware update, version V6.63, has been released to OnStar equipped vehicles. Due to cyber-security policies this firmware update cannot be installed through TIS2Web, so firmware (OnStar v6.63) was released to involved vehicles via an Over-the-Air (OTA) update. This update can occur remotely through in-vehicle prompts from the radio display. However, some customers may decline the vehicle update or the update may be unsuccessful. This would require the dealer to install updated OnStar hardware. |
Service Procedure
Note: This procedure only applies if the condition occurred after a battery disconnect. Vehicles beyond 6 months in service and greater than 10,000 mi/16,000 km may have a true need for air filter maintenance that is NOT related to this bulletin procedure.
Note: It is possible that the OnStar OTA update has been pushed to the vehicle and that the customer has missed or ignored on-screen prompts to install it. A typical symptom of any pending OTA update is that the radio will remain on for 30 seconds after the ignition has been turned off and the driver door opened. Do NOT decline the OnStar update. OnStar firmware CANNOT be installed via TIS2Web due to cyber-security policy.
1. Inspect the engine air filter.
1.1. If the engine air filter requires service, advise the customer of the needed maintenance. Air filter maintenance is not a warrantable service.
1.2. If clean (not restricted), proceed to steps 2-4.
2. Reset the DIC message.
2.1. In the DIC scroll to Air Filter Life > select Menu > Reset > Yes.
5322891
5322897
5322902
Note: This only applies to vehicles built prior to February 11, 2019 (Fort Wayne) or February 13, 2019 (Silao). Vehicles built after these dates where assembled with the firmware solution installed.
3. Inspect for an OnStar firmware update v6.63 and install, if necessary.
3.1. Enter the radio menu on the radio display.
Select Home > Settings > About.
• On IOR-equipped vehicles this will bring you to the About menu page to view Update History.
• On IOS, IOU, or IOT-equipped vehicles, scroll to Build Number and select the lowercase “i” next to Build Number to view
Update History.
IOR-equipped vehicles:
5318461
IOS/IOT/IOU-equipped vehicles:
- Look for a line that contains reference toOnStar update “63 ” or greater in it. The sample illustrations above do not show this specific version but illustrate where to find it. The presence of OnStar v6.63, or any OnStar update greater than v6.63 indicates the firmware has been installed and that this bulletin does NOT apply. Refer to SI for further diagnostics.
Note: It is possible that the OTA update has been pushed to the vehicle and that the customer has missed or ignored on-screen prompts to install it. Do NOT decline the OnStar update. It CANNOT be installed via TIS2Web.
5318466
- Determine if the update has already been downloaded to the module and is pending installation.
- Enter the radio menu on the radio display. Select Home > Settings > Updates. If an update is available, a popup will soon appear. Select Install Update and follow the on-screen instructions.
Note: Do NOT replace the OnStar module prior to inspecting for the presence of the pending update.
- If the OnStar v6.63 update is not listed in the About screen, the Update History menu, or the Updates screen; or if the customer comments that they did receive notification of an OnStar OTA update and declined it, replace the OnStar module. Firmware will be current on the replacement part.
Parts Information
Note: Part numbers listed in the part table may be superseded over time. They were current at the time of publication.
Refer to the Electronic Parts Catalog and/or Electronic Service Center for the appropriate OnStar Module part number based on the VIN.
Causal Part | Description | Part Number | Qty |
X | Module, Comn Interface | 84644344 | 1 |
X | Module, Comn Interface | 84644343 | 1 |
Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
Labor Operation | Description | Labor Time | |
9104437 | Inspect Air Filter, Reset DIC Message and install over-the-air update OnStar v6.63 | 0.8 hr | |
*9104383 | Inspect Air Filter, Reset DIC Message and replace Communication Interface Module | 1.0 hr | |
* Internal system records will indicate when an update was pushed to the vehicle and whether it was declined. Dealers should only replace the module after confirming an update is not pending installation or was previously declined by the customer.
Warranty claims for OnStar module replacement per this bulletin are subject to review and debit if the over the air update was available for installation at the time of repair. |
Version | 1 |
Modified | Released May 21, 2019 |
SEOCONTENT-END
Bulletin No.: 19-NA-093
Date: May, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161897
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161897-9999.pdf
To View or Download this Document Click Here
Reprogramming
GM Diagnostic/Programming (TIS2Web)
Approved J2534 Device with TIS2WEB can reprogram 1996 and later All GM Modules.
To obtain the latest electronic controller calibration information for your vehicle, go to https://tis2web.service.gm.com/tis2web and enter the vehicle's 17 character Vehicle Identification Number (VIN) and select 'Get CAL ID’.
You can then compare the latest part number with the actual number installed on the vehicle to determine if a reprogram is needed.
The Service Programming System (SPS) application is part of the TIS2Web system. To program an ECU, the SPS application must communicate with the vehicle control modules using the proper J2534 programming interface tool.
The following are the supported interface tools:
The Tech 2 supports model years 1996 and beyond. With the addition of the CAN Diagnostic Interface (CANdi) module, Tech 2 is fully backward compatible with current Tech 2 functionality and operates transparently when diagnosing non-CAN-equipped vehicles.
Servicing the next generation Global A vehicles will require the diagnostic software, GDS2, Global Diagnostic System 2 running on a local PC device while the MDI is connected to the vehicle. The GM MDI is the Global Diagnostic tool for future vehicles starting with Global A vehicles.
The GM MDI was introduced in the fall of 2007 for Pass-Thru programming and offers faster programming speed. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and into the future. Click here to view a list of GDS supported vehicles.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
- 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
- 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
- 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
- 🔥【The King of Cost-Effectiveness From Autel】Fully upgraded from Autel MaxiSys EliteII /MS908S Pro/MK908P, Autel Scanner launched 2023 Newest 🅰🆄🆃🅴🅻 MaxiSys Elite II pro. 👉2 Years Free Update, ECU Programming&Coding, 38+ Service, Bidirectional Control, etc. Auto scanning 2.0 with all hardware parameters upgrade, provide total 8 (5+3)x diagnostic speed ✅CAN FD/ DOIP protocols support GM MY2020+ models, BMW E/F/G, Jaguar, Land Rover makes (Elite II can’t).
- 🔥【OE-LEVEL J2534 ECU PROGRAMMING & CODING】Enhance your diagnostics with the Elite II Pro J2534 Reprogramming scanner. This cutting-edge auto scanner supports : 1) program the new adaptive data to the on-board modules 2) replace the existing software/firmware in the ECUs 3) match the component control modules after repair or replacement 4) flash the hidden functions and 5) enhance the vehicle features. Experience 5X faster communication with SAE J2534-1 & -2 compliant programming interface.
- 🔥【38+ Maintenance Functions & High-End Functions】Autel scan tool Elite II Pro shares the same functional and deep service functions with other high-end scanners such as MaxiSys MS909/MS919/Ultra. 38+ special functions such as EPB/SAS/BMS/Oil/ABS/TPMS/Throttle/Injector/Suspension, etc., fix almost all “check engine” light issues. Bi-directional control, guided function, component matching, and scan VIN/license, together offer you effective and convenient diagnostic experiences.
- 🥇【DOIP& CAN FD Protocol, Top Hardware 5X Lightning Speed】Exclusive J2534 brings same DoIP & CAN FD protocol as Ultra/ MS919: CAN FD for GM MY2020+ Models; DOIP for BMW E/F/G Chassis, Jaguar, Land Rover makes. The improved hardware makes ELITE II PRO run more smoothly, even faster than MS919. It’s build with 8-Core CPU, Android 10.0 OS, 9.7’’ 1536*2048 touchscreen, 4GB&128GB, 11,000mAh battery, 2.4&5GHz dual-band WIFI, surpass Elite II/ Elite/ MS908S Pro II/ MK908 Pro II.
- 🔥【Free MV108 Assist Repairs】The MV108 digital inspection camera is designed to work with the MaxiSys series and PC, turning your MaxiSys scanner into a video inspection scope, allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure quickly. One programmer tool Elite II Pro and one Videoscope MV108 make a perfect match.
- 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
- 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
- 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
- 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
- Supports Current & Earlier Vehicles: Enables diagnostics, programming and other “dealer” functions through OEM applications
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- Stay up-to-date with thelatest firmware and support of the SM2Pro J2534VCI ECUs programmer, ensuring reliable perform and optimalresults.
- The SM2Pro J2534VCI ECUs programmer is a trustedtool for professional technicians, offering comprehensive functionality and easy integration into your workflows.
- The SM2Pro J2534VCI ECUs programmer offersadvanced functionality for efficient and precise ECUs programming.
- With its 67IN1 without dongle & OBDcompatibility, the SM2Pro J2534VCI ECUs programmer provides a versatilesolution for read and write operations.
- Experienceseamless ECUs programming with the SM2Pro J2534VCI, designed to streamlines the read and write processes for enhanced efficiency.
Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.