“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161921
Manufacturer Communication Number: 19NA110
Summary
This informational bulletin provides information for dealers/technicians on visible cracks in shock tower near the strut top mount.
4 Affected Products
Vehicle
MAKE | MODEL | YEAR |
CHEVROLET | CAMARO | 2016-2019 |
SEOCONTENT-START
Bulletin No.: 19-NA-110
Date: May, 2019
Service Bulletin
INFORMATION
Subject: Visible Cracks in Shock Tower Near Strut Top Mount
Brand: | Model: | Model Year: | VIN: | Engine: | Transmission: | ||||
from | to | from | to | ||||||
Chevrolet | Camaro | 2016 | 2019 | All | All |
Involved Region or Country | North America and N.A. Export Regions |
Condition | 5334406
5334411 Some customers may comment on seeing cracks on the shock tower, near the strut top mount. Some examples are shown in the graphics above. Note: Be sure to inspect additional suspension components and disassemble the tire/ wheel assembly to verify no other components are damaged. |
Cause | The cause of the condition may be a hard impact (such as curb or pot hole) that drives a lot of energy up through the strut tower casting, ultimately cracking it. |
Correction | To repair this condition, the shock tower must be replaced. Refer to Front Wheelhouse Panel Replacement (Partial) or Front Wheelhouse Panel Replacement (Complete) in SI. Note: Vehicles repaired for the conditions outlined in this bulletin should not be considered warranty. Any warranty claims submitted with these conditions may be debited. |
Version | 1 |
Modified | Released May 14, 2019 |
SEOCONTENT-END
Bulletin No.: 19-NA-110
Date: May, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161921
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161921-9999.pdf
To View or Download this Document Click Here
Bulletin No.: 19-NA-110
Date: May, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161898
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161898-9999.pdf
To View or Download this Document Click Here
“This site contains affiliate links for which OEMDTC may be compensated” |
- [Vehicle Fitment]: Compatible with Chevrolet Camaro 2010-2015 V6 3.6L ✔ Camaro 2010-2011 V8 6.2L ✔ Camaro 2012-2012 V8 6.2L (with Hydraulic Steering) ✔
- [Installation Position]: Front Suspension Left and Right Side
- [Ideal Replacement]: This suspension steering kit is replacement for above model's suspension system, and may help you resolve those problems: ① clunking noise ② steering wander ③ uneven tire wear ④ excessive vibration ⑤ poor handling !!!!
- [Package Detail]: 2 x Front Lower Forward Control Arm with Ball Joint Assemblies, 2 x Front Lower Rearward Control Arm with Ball Joint Assemblies, 2 x Front Stabilizer Bar Links, 2 x Front Outer Tie Rod Ends, 2 x Front Inner Tie Rod Ends
- [Reference Part Number]: K621479, K621478, K621481, K621480, K750553, K750552, ES800939, EV800885, RK621479, RK621478, RK621481, RK621480,92241266, 92227430
- 【Fit Perfectly】 For Chevy Camaro All Models, excluding MagneRide Suspension 2010 2011 2012 2013 2014 2015
- 【Spring Rate】 Front Spring rate: 8 kg/mm (448 lbs/in) & Rear Spring rate: 13 kg/mm(728 lbs/in) wormance spring - Under 600,000 times continuously test, the spith spring preload: 7-10 mm. Hi Tensile perfring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- 【Lowering Kits】 The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will "Lower your car" and DOES NOT keep to original ride height.
- 【Twin-tube Structure】 Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- 【Excellent Material】The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- [Vehicle Fitment]: Compatible with Chevrolet Camaro 1967-1969 ✔ Nova 1969-1974 ✔ Fit for Buick Apollo 1973-1974 ✔ Fit for Pontiac Firebird 1968-1969 ✔ Ventura 1971-1974 ✔ Fit for Oldsmobile Omega 1973-1974 ✔
- [Ideal Replacement]: This control arm assembly is replacement for above model's suspension system, and may help you resolve those problems: ① clunking noise ② steering wander ③ uneven tire wear ④ excessive vibration !!!!
- [Specification]: Position: Front Side; Condition: Brand New; Material: Steel; Control Arm Bushing Included: Yes; Ball Joint Included: Yes; Pre-Greased: Yes; Accessories Included: As Picture; About Warranty: 1-Year
- [Package Detail]: 2 x Front Upper Tubular Control Arm Assemblies, 2 x Front Lower Tubular Control Arm Assemblies
- [Reference Part Number]: 91036769, PCE179.1011, 3452643
- Compatible With Chevrolet Camaro Coupe 2010 2011 2012 2013 2014 2015
- Spring Rate: Front - 8 kg/mm (448 lbs/inch) | Rear - 12 kg/mm (672 lbs/inch) // Damping Levels: 16 Levels // Top Mount: Front - No, Re-Use Factory Top Mount | Rear - No, Re-Use Factory Top Mount
- Mono-Tube Shock Design With 16 Levels of Damping Force Adjustment Combined With Upgrade Spring Rate.
- Sport Tuned Lowering Springs To Ensure Ride Improvement; Lower Range From 1.25 to 2.25 inch Drop(May Vary Depends on Car Models, NOT SUPER LOW TYPE); Affordable Pricing Performance Suspensions Upgrade; Improve Overall Handling and Ride Quality When Lowered.
- No Install Instructions, Install By Experienced Professionals Is Recommended. Adjustment Requires. Limited Warranty Prodvided By Manufacturer(Parts Only)
- Fits Chevrolet Camaro 2010 - 2011 3.6l & 6.2l Engines , Fits Chevrolet Camaro 2012 V8 6.2l Excluding Supercharged Models , Fits Chevrolet Camaro 2013 - 2015 V6 3.6l
- Kit Includes: 1x Front Lower Forward Control Arm w/Ball Joint Assembly - Driver Side , 1x Front Lower Forward Control Arm w/Ball Joint Assembly - Passenger Side , 1x Front Lower Rearward Control Arm w/Ball Joint Assembly - Driver Side , 1x Front Lower Rearward Control Arm w/Ball Joint Assembly - Passenger Side , 1x Front Sway Bar End Link - Driver Side , 1x Front Sway Bar End Link - Passenger Side , 2x Front Outer Tie Rod End - Driver and Passenger Side , 2x Front Inner Tie Rod Ends
- OE/OEM Part Number ES800939 EV800885 K621478 K621479 K621480 K621481, K750552 K750553
- 【Part Position】 Front Left and Right, Driver and Passenger Side
- 【About Warranty】Each product has a 12-month warranty. We try to provide quality products and service to our customers.
- COMPATIBLE: For Chevrolet Camaro 5th Gen 2010 2011 2012 2013 2014 2015
- SPRING RATE: Front: 8 kg/mm(559 lbs/inch), Rear: 12 kg/mm(671 lbs/inch), Spring Preload 7-10mm; And Spring Length Front 200 mm & Spring Length Rear 180 mm
- MONO-TUBE: Design Improve Your Handling Performance without Sacrifice Comfortable Ride. A fast and Affordable Way to Easily Upgrade Your Car's Appearance.Ideal for Any Track, Drift and Fast Road and Can Also be Used for Daily Driving.
- FULL-LENGTH ADJUSTABLE: Adjustable the height of the car by moving the spring seat lock up and down, Simple structure, easy to use; Lowering height by 1-3 inches.
- PAINTED:The pipe body use our self-developed surface treatment process, which has stronger anti-rust ability.It can meet the needs of different ground driving vehicle owners.
- Other Part Number: K621478 K621479 K621480 K621481 K750552 K750553 Included Hardware: Same as the pics show
- Features: 100% Accuracy of Fit, Easy to Replace, Heavy Duty, Sealed Part Type: Control Arm Kit
- Compatible With CHEVROLET CAMARO 2010 - 2013 All Models Compatible With CHEVROLET CAMARO 2014 - 2015 LT/LS/SS/ZL1 Models
- LISTING INCLUDES: 1x Front Lower Forward Control Arm Assembly - Driver Side - K621479 1x Front Lower Forward Control Arm Assembly - Passenger Side - K621478 1x Front Lower Rearward Control Arm Assembly - Driver Side - K621481
- 1x Front Lower Rearward Control Arm Assembly - Passenger Side - K621480 1x Front Sway Bar End Link - Driver Side - K750553 1x Front Sway Bar End Link - Passenger Side - K750552
- Direct Fit, OE Replacement Suspension Kit
- Kit Includes: (2) Front Sway Bar Links; (1) Front Center Link; (2) Front Inner Tie Rods; (2) Front Tie Rod Adjusting Sleeves; (2) Front Outer Tie Rods; (1) Idler Arm; (2) Front Lower Ball Joints
- Vehicle Specific: Check fitment information in the listing for compatibility
- OE Reference Number(s): 14039143,15571395,15588797,22598278
- Aftermarket Reference Number(s): 14039143,15571395,15588797,22598278,DS1049,ES2032S,ES2226RL,ES2227RL,K5252,K6145T,K6249,K80007,MDS1049,MES2032S,MES2226RL,MES2227RL,MK5252,MK6145T,SUS00105,SUS00562,SUS00564,SUS05311,SUS07320,SUS07321,SUS07322
- [Vehicle Fitment]: Compatible with Chevrolet Camaro 1993-2001 (with Standard Suspension) ✔ Fit for Pontiac Firebird 1993-2001 ✔
- [Installation Position]: Front Suspension Left and Right Side
- [Ideal Replacement]: This suspension steering kit is replacement for above model's suspension system, and may help you resolve those problems: ① clunking noise ② steering wander ③ uneven tire wear ④ excessive vibration ⑤ poor handling !!!!
- [Package Detail]: 2 x Front Upper Ball Joint, 2 x Front Lower Ball Joint, 2 x Front Outer Tie Rod End, 2 x Front Inner Tie Rod End, 2 x Front Sway Bar Link
- [Reference Part Number]: K6145T, K6462, ES3238RL, EV260, K5252
- This Is Direct Replacement For 2011 2012 Chevrolet Camaro Steering Rod Ends 2012 Camaro [V8 6.2L Models Excluding Supercharged] Tie Rod End Links Suspension Kit
- Compatible With 2012 2013 2014 2015 Chevyrolet Camaro Suspension Rod Inner Outer Tie Rods Will Return Your Vehicle To Original Ride Quality.
- Kit Includes 2x Front Inner Tie Rod End + 2x Front Outer Tie Rod Ends Are Manufactured To OE Specifications Will Restore Your Vehicle Back To Original Equipment Steering.
- All Components Manufactured In High-quality Standards. Detroit Axle Is A Leading Supplier Of Ride Control Products To OE Vehicle Manufacturers Nationwide, That Expertise Translates To Detroit Axle's OE-quality
- 10 - Year Warranty On Tie Rods Inner And Outer. Detroit Axle Is A Leading Supplier Of Suspension Kit, Brake Kit, Automotive Kit Etc, This Tie Rod End Suspension Kits Fit Chevy Camaro Properly.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.